• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.304-305
• /
• 2014

New and Renewable eco-friendly energy technique can be to enable rational use of resources, as well as securing economic efficiency. Therefore, most of the public facilities must apply eco-friendly energy systems. In this study was applied the solar light energy system to the construction projects. As a result, the proposed system was implemented various effect such as the power cost savings in public facilities. In addition to, the proposed system was improved functional aspects such as improving space utilization.

• The Magazine for Energy Service Companies
• /
• s.47
• /
• pp.18-20
• /
• 2007

서울시가 앞으로 추진하는 건물개조사업은 조명, 냉난방, 공조시스템 뿐만 아니라, 단열, 지붕, 창문 개선 및 태양광 시설 등 신.재생 에너지 설치 등이 포함된 사업이며, 서울시의 계획은 건물 에너지 절약과 온실가스 배출 감축 등 환경적 효용 외에도 건물 운영비 절감을 통한 임대비용 절감, 관련 산업 육성 등 경제 유발과도 상당할 것으로 기대하고 있다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.5
• /
• pp.72-79
• /
• 2009

Solar energy is desirable due to its renewable and pollution-free properties. In order to utilize the present utility grid infrastructure for power transmission and distribution, a do-dc boost converter and grid connected dc-to-ac inverters are needed for solar power generation. The dc-dc boost converter allows the PV system to operate at high do-link voltage. The single-phase inverter provides the necessary voltage and frequency for interconnection to the grid. In this paper, first, current loop transfer function of a single-phase grid-tie inverter has been systematically derived Second the MPPT of conductance increment method at converter side is proposed to supply the maximum power to the inverter side. Simulation results are shown to access the performance of PV system and its behaviour at the interconnection point.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.7
• /
• pp.74-80
• /
• 2006

This paper describes a solar energy conversion strategy is applied to grid-connected single phase inverter by the maximum power point of conversion strategy. The maximum power point of tracking is controlled output power of PV(photovoltaic)modules, based on generated circuit control MOSFET switch of two boost converter for a connected single phase inverter with four IGBT's switch in full bridge. The generation control circuit allows each photovoltaic module to operate independently at peak capacity, simply by detecting of the output power of PV module. Furthermore, the generation control circuit attenuates low-frequency ripple voltage. which is caused by the full-bridge inverter, across the photovoltaic modules. The effectiveness of the proposed inverter system is confirmed experimentally and by means of simulation.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12b
• /
• pp.704-707
• /
• 2011

본 논문은 ZigBee 기반의 통합센서 네트워크 구축 및 모니터링 시스템 구현을 통해 계절과 시각, 그리고 천기상태에 따라 변화하는 태양광의 광합성유효광량자속밀도를 태양광병용형 식물공장 내부의 각 영역별로 측정 및 분석하고자 한다. 통합센서를 통해 수집된 정보는 식물의 생육에 필요한 적정 태양광 에너지가 유입되는 시간대와 보광을 필요로 하는 시간대 및 그 양을 파악하는데 활용되며, 이를 통해 조명 및 냉난방 기기를 지능적으로 제어함으로써 전체 에너지 소비를 절감하고자 한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.6
• /
• pp.89-99
• /
• 2008

In this paper proposes a novel tacking algorithm regarding the power loss when operating a tracking system for a rapidly changing insolation to improve the power of PV hacking system. The tracking system of sensor method used in a conventional PV power station is unable to exactly track a sun position when lacking in the intensity of radiation and has the problem is malfunction of tracking system by a rapidly changing climatic. The tracking system of program method spends too much energy on the unnecessary operation of tracking system because that is unable to adapt itself to a outside factor of climatic environment. In case of tracking an azimuth and altitude of the sun in realtime, therefore, the actual PV power is less increasing than the power of tracking system fixed a specific position. To reduce the power loss, this pap proposes a novel control algorithm of the tracking system. Also, this paper is analyzed efficiency of traditional solar tracking method and proposed method, prove validity of proposed algorithm through demonstrable study.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.2
• /
• pp.23-29
• /
• 2012

To recently, light of the sun and fuel cell etc. which is new and renewable energy is developed with the direct current energy source mostly. And it is necessary that the utilization plan which does supply it properly. In this case, the direct current illumination system can be a typical alternative of it. The system similar to the development system is composed of type which connects to each other the photovoltaic pannel, the charge kit, and the battery bank. I develop all-in-one system which the power supply system and photovoltaic pannel which can charge and use efficiently. Additionally, I exploit the DC lamp module of three wave which can separate the electronic ballasts from the module. Developed the DC Lamp module of all-in-one which can turn on or can turn off, by operation of ON/OFF button. It can be used semipermanently by changing just only electronic ballasts.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.1
• /
• pp.109-116
• /
• 2005

Wind power and photovoltaic(PV) systems are getting into the spotlight as substitute energy. But problem is happened stability by speed change of wind and the power output of the sun's ray. The power output amount according to velocity of wind power system. System breakdown can happen at change of sudden velocity, typhoon and night. This paper shows a automatic tail safety brake controller based on feedback control using wind velocity. The operation of automatic tail safety controller verified by manual test. PV system is a energy change system by temperature of sun's ray and cell. Maximum power point tracking(MPPT) is used in PV systems to maximize the photovoltaic array output power. In existed PV system is low output and changeable DC voltage for boost and filtering the buck-boost converter use. But, this paper established deformed DC-DC converter. Changed Buck-boost converter's unlined output current to line output current using DC-DC converter. This is effect that reduce ripple of output current. Proved through an output waveform comparison experiment. Finally, tail safety brake controller is established to wind turbine system for stability elevation and DC-DC converter is established on PV system for stability output.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.10a
• /
• pp.38-39
• /
• 2009

친환경, 신 재생에너지 중 하나인 태양광은 크게 발전용과 조명용으로 사용될 수 있다. 자연채광시스템에 주요부품인 태양광을 전달하는 자연채광용 유리광섬유를 국내최초로 개발하였다. 적용된 자연채광시스템에 대해 소개하고 광섬유와 광케이블의 기본구조, 광학적 특성, 벤딩조건에 따른 조도변화 및 스펙트럼을 분석하였다. 조명용 뿐 만 아니라 식물성장용으로도 사용가능하여 지하농원 등의 적용이 가능하다.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.3
• /
• pp.66-74
• /
• 2014

In this paper, the performance of Hybrid Dimming control system for Daylighting system is evaluated by accredited tests. The system controls the balance of illuminance of daylight between daylight system and LED light system. It makes the normal illuminance of interior without the effects of weather by controlling the LED depending on the brightness of outside. For the tests, 6 diffusers($600{\times}300mm$) were installed in lighting area($36m^2$) and normal operation of the system sensors were tested about the interference of sunlight. The results of the examinations were satisfied with the criteria of accredited tests. Further research is the verification of energy saving effect by comparing the Hybrid Dimming control system to current artificial light system.