• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.289-290
• /
• 2003

NMHC (non-methane hydrocarbons)는 $C_2$- $C_{l2}$의 탄화수소로 구성되며 NOx와 함께 오존을 생성시킨다. NMHC에 카보닐 화합물과, 카본수가 증가하여 휘발성이 떨어지더라도 광화학 반응성이 있는 탄화수소가 추가되면 우리에게 보다 익숙한 VOC (volatile organic compounds)가 된다 (Watson et al., 2001). NMHC는 자동차, 가스 및 석유 정제시설, 주유소, 세탁공업, 산업공정 등으로부터 배출된다. NMHC는 오존 등 광화학 산화제 뿐 아니라 미세입자 생성에도 직접 또는 간접적으로 관여하여 광화학 스모그를 유발시킬 수도 있다. (중략)략)

• Journal of Welding and Joining
• /
• v.13 no.4
• /
• pp.24-29
• /
• 1995

전자제품의 고기능화에 따라 Controller의 중요성은 점점 증대되고 있다. 따라서 Controller(이하 PCB라 칭함)의 제조 공정에서 납땜 관련 Board 재료, Flux, Flux 탄화 연기 등은 식물의 고사 현상등 지구환경을 위협하고 있다. 특히, 자동차 매연이나 도장 또는 PCB 납땜시 SOX, NOX, 탄화수소계등이 휘발하게 되며 아황산 가스 나 질소 산화물이 대기중에서 물과 반응하여 황산 또는 질산으로 변하여 PH 5.6이하 의 산성비를 내리게 한다. 이 산성비는 삼림피해 어류감소 등 생태계를 파괴하고 콘 크리트 철재등 건축 자재물을 부사시킨다. 또한 바람에 의해 인접국가에도 막대한 피해를 주고 있다. 특히 폐가전제품의 PCB 접합부에 산성비가 접촉되면 Pb 이온이 용출되어 토양 및 수질오염, 인체피해 등 심각한 영향을 미치게 된다. 최근 이와관련 세계 각국의 규제 움직임이 활발해지고 있어, 본 논문은 전자기기 제품의 심장인 PCB 와 관계된 환경오염 대상물질의 규제동향과 심각성 및 이에 대한 환경피해 Mechanism 을 분석하여 실장기술에 있어서 총체적인 환경대응 방안을 모색하고자 한다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.1
• /
• pp.145-148
• /
• 2001

SiC composites were developed by incorporating glass phase into SiC, in the light of improving mechanical properties of material for spectacle lens cutting. Specimens for spectacle lens cutting with glass phase as sintering additives have been fabricated by hot-pressing at $1810^{\circ}C$ for 2 hr under a pressure of 25 MPa. The fracture toughness and hardness of hot-pressed specimens were characterized and compared with previous works. Typical hardness and fracture toughness of materials for spectacle lens cutting were 12 GPa and $5.1MPa{\cdot}m^{1/2}$ respectively.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2006.04a
• /
• pp.162-165
• /
• 2006

유해성 유기물질로 오염된 토양의 복원을 위한 토양세척공정에서 계면활성제를 선택적으로 재이용하기 위해 활성탄을 이용한 흡착 칼럼의 성능을 평가하였다. 계면활성제로는 Triton X-100을 소수성 유해 유기물질로는 다환방향족 탄화수소의 하나인 phenanthrene를 사용하여 그 성능을 평가하였다. 계면활성제의 흡착은 phenartthrene에 비해 빠른 흡착 특성을 보였으며 phenanthrene은 계면활성제의 포화흡착상태에서도 지속적으로 흡착이 이루어졌다. 이는 계면활성제의 흡착이 종료된 이후에도 유해성 유기물질의 지속적인 흡착을 기대할 수 있어 계면활성제의 지속적인 재이용과 활성탄 사용시간의 증대를 가져올 수 있음을 의미한다. 이와 같은 활성탄 칼럼에서의 유해성 유기물질의 우수한 선택적 흡착 결과는 기본적으로 소수성 정도의 차이와 size exclusion에 의한 기작뿐만 아니라 활성탄에 흡착된 계면활성제에 의한 다환방향족 탄화수소의 추가적인 흡착이 일어나 전체적인 성능이 향상되는 것에 기인한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.797-799
• /
• 2010

In preparation of NBD dimer, one of the industrially useful multicyclic hydrocarbon compound, various catalyst, solvent and byproducts were included in reaction product at the end of dimerization reaction. In order to increase the yield of NBD dimer mixture, first of all, effective separation process development was required. The research for improvement of NBD dimer yield were performed by use of eco-friendly and recyclable separation solvent.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.2
• /
• pp.181-195
• /
• 2020

Characteristics of carbonized biomass obtained from a Wood charcoal briquette manufacturing process using an open hearth kiln are analyzed in this research, and differences in the characteristics based on the results of a mechanical screening process and the position within the kiln. One type of biomass and five types of carbonized biomass were collected from a Wood charcoal briquette manufacturer. After screening and grinding processes were performed on samples of 1 type of biomass and 5 types of carbonized biomass extracted from a Wood charcoal briquettes manufacturer to classify by particle size, fixed carbon, ash, volatile matters, elemental composition, and high heating value (HHV) were measured. Experimental results showed that the carbonized biomass collected from the middle layer had the highest HHV, 20.4 MJ/kg, and therefore had the highest fuel quality. In terms of particle size, the carbonized biomass below 100 mesh had the lowest ash content and the highest HHV, carbon content, and fixed carbon content. Correlation analyses showed that ash content had negative correlations with HHV, volatile matters, fixed carbon, and carbon content, which suggested that ash content affected negatively on fuel quality.

• Resources Recycling
• /
• v.13 no.5
• /
• pp.45-50
• /
• 2004

To investigate the characteristics of phases formed in iron carbides, super iron carbide was synthesized from hematite fines with $CO-H_2$ gas mixture after reduction under $H_2$ gas at $600^{\circ}C$. Before carburization, the surface of iron powder reduced was pre-treated in the atmosphere of 0.05 vol% $NH_3$-Ar. The synthesized iron carbides were comprehensively explored by C/S analyzer(Low C/S determinator), M$\"{o}$ssbauer spectroscopy, X-ray diffraction patterns(XRD), scanning electron microscopy(SEM), transmission electron microscopy(TEM), and Raman spectroscopy at various reaction time of 5, 10, 15, 20, 25, 30, and 35 min, respectively. By adding a small amount of $NH_3$ gas, the super iron carbides containing 10 wt% carbon were synthesized, and its addition stabilized iron carbides. It was found that the $NH_3$ treatment played a major role in the formation of iron carbide without decomposition($Fe_3C{\to}$3Fe+C) of iron carbides and precipitation of free carbon. It also succeed to synthesize super iron carbide, $Fe_5C_2$, as a stable single phase without involving Fe and $Fe_3C$ phases.

• Composites Research
• /
• v.30 no.2
• /
• pp.77-83
• /
• 2017

Liquid silicon infiltration, which is one of the methods of producing fiber reinforced ceramic composites, has several advantages such as low fabrication cost and good shape formability. In order to confirm LSI process feasibility of SiC fiber, $SiC_f/SiC$ composites were fabricated using three types of SiC fibers (Tyranno SA, LoxM, Tyranno S) which have different crystallinity and oxygen content. Composites that were fabricated with LSI process were well densified by less than 2% of porosity, but showed an obvious difference in 3-point bending strength according to crystallinity and oxygen content. When composites in LSI process was exposed to a high temperature, crystallization and micro structural changes were occurred in amorphous SiOC phase in SiC fiber. Fiber shrinkage also observed during LSI process that caused from reaction in fiber and between fiber and matrix. These were confirmed with changes of process temperature by SEM, XRD and TEM analysis.

• Composites Research
• /
• v.30 no.2
• /
• pp.108-115
• /
• 2017

Among several fabrication processes of $SiC_f/SiC$ composites, the chemical vapor infiltration (CVI) process has attractive advantages in manufacturing complex net-or near-net-shape components at relatively low temperatures, easily controlling the microstructure of the matrix and obtaining the highest SiC purity level. However, it has disadvantages in that the ratio of residual pores in matrix is higher than other processes and processing time is relatively long. To reduce the residual porosity, the whisker-growing-assisted CVI process, which is composed of whisker growth and matrix filling steps has been developed. The whiskers grown before matrix filling may serve to divide the large natural pores between the fibers or bundles so that the matrix can be effectively filled into the finely divided pores. In this paper, the fundamentals of the CVI process for preparation of $SiC_f/SiC$ composites and some experimental results prepared by CVI and whisker-growing-assisted CVI processes are briefly introduced.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.05a
• /
• pp.85-92
• /
• 2006

Crude oil is complex mixture if thousands of different organic compound formed from a variety of organic materials that are chemically converted under differing geological conditions over long periods of time. Also oil composition varies according to crude source, refining, processing, handling and storage. The oil fingerprint method is application if specific knowledge of petrochemicals and use if sophisticated analytical equipment and techniques to identify the source(s) if oil pollution. KCG currently utilizes four primary analytical techniques: Gas Chromatography (GC), Fluorescence Spectroscopy(FL), Infrared Spectroscopy(IR) and Gas Chromatography mass spectrometer(GC/MS). Of all these techniques, GC technique are most widely used Gas Chromatography is used as a primary analytical method because high reliableness, high separating efficiency and repeatability.