• Journal of the Korean Geotechnical Society
• /
• v.20 no.8
• /
• pp.5-14
• /
• 2004

The settlement of foundations under working load conditions is an important design consideration. Well-designed foundations induce stress-strain states in the soil that are neither in the linear elastic range nor in the range usually associated with perfect plasticity. Thus, in order to accurately predict working settlements, analyses that are more realistic than simple elastic analyses are required. The settlements of footings in sand are often estimated based on the results of in-situ tests, particularly the standard penetration test (SPT) and the cone penetration test (CPT). In this paper, we analyze the load-settlement response of vertically loaded footings placed in sands using both the finite element method with a non-linear stress-strain model and the conventional elastic approach. Based on these analyses, we propose a procedure for the estimation of footing settlement in sands based on CPT results.

• International Journal of Highway Engineering
• /
• v.5 no.4 s.18
• /
• pp.13-22
• /
• 2003

Several design methods from overseas are employed without considering different conditions such as material properties, climate, and traffic condition in this country. Therefore, there are limitations in application. Therefore, new pavement analysis system which is able to design a pavement efficiently and economically should be set up. In this study, 243 probable sections are classified depending on values of layer thickness and elastic modulus, and the effect of load types for the probable sections are analyzed. The section showing larger load distribution is chosen for analysis. As a result of sensitivity, a layer thickness has more influence on pavement than an elastic modulus does. The stress distribution of FWD test load is larger than that of circular load. This study compares outputs between nonlinear elastic model and linear elastic model. Based on the result, this study finds nonlinear elastic model considering stress condition in the ground is recommended for subbase.

• Magazine of the Korea Concrete Institute
• /
• v.1 no.1
• /
• pp.87-94
• /
• 1989

철근콘크리트 뼈대구조와 같이 설계변수가 과다하고, 제약조건식이 복잡한 구조물의 최적화를 위하여는 구조물을 여러개의 부분구조물로 분할하여 최적해를 구하는 분할법이 많이 사용되고 있다. 그러나 기존의 분할법에 의한 최적화는 구조해석과정과 고정된 부재력에대한 단면설계변수의 부분최적화 과정만으로 이루어지기 때문에, 최적해를 구하려면 반복적인 재해석과정만을 수행하지 않으면 안된다. 따라서 본 연구에서는 다단계분할법에 의하여 철근콘크리트 뼈대구조의 최적화 문제를 3단계로 형성하고, 분할된 부분최적화문제의 최적화시 전체구조의 강성 및 부재력 변화가 반영되어 부분 구조물의 결합을 유지시킬 수 있는 최적화 알고리즘을 제안하였다. 최적화 문제에서 설계변수로는 단면의 크기, 철근량, 모멘트 재분배율등을 취하고,목적함수는 경비함수, 제약조건으로는 강도설계법에 의한 부재강도, 시방서의 요구사항등을 고려하여 문제를 형성하였다. 본 연구에서 개발한 다단계 최적화과정의 첫째 단계에서는 탄성해석에 의하여 재분배모멘트의 설계공간을 형성한다. 이 때 부재력변화량추정(forece approximation technique)에 의하여 단면치수의 변화에 따른 부재력의 변화를 제약조건식 내에 포함시킬 수 있도록 하였다. 둘째 단면에서는 첫째 단계에서 구한 부재력변화량추정이 포함된 제약조건식 내에서 무제약최소화기법에 의하여 단면치수를 최적화하도록 하였다. 셋째 단계에서는 재분배 모멘트를 최적화하였으며, 이 때 재분배모멘트의 변화에 따른 단면설계 변수의 변화는 둘째 단계에서 구한 설계민감도(design sensitivity)를 이용하여 반영시키도록 하였다. 제안된 알고리즘을 1층 2경간 및 2층 1경간 뼈대구조에 적용하여 알고리즘의 타당성과 효율성을 입증하였다. 따라서 본 연구의 알고리즘은 철근 콘크리트 뼈대구조의 최적설계에 안정성있게 적용할 수 있을 것으로 판단된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.4
• /
• pp.239-250
• /
• 1993

The dynamic resilient modulus tests to determine the $M_R$ of the soils require expensive equipments and well trained personnels to obtain reliable test results. These problems inherent in the dynamic resilient modulus testing have been realized as major negative factors to hinder the $M_R$ test from being practically implemented as a routine test. In this regard. it is highly desirable to develop a simpler alternative testing method incorporating inexpensive equipments and easy-to-perform testing procedures. Developed in this study is an alternative $M_R$ test method based on statically repeated loading scheme utilizing the standard static triaxial test equipments. Applicability and limitations of the developed static $M_R$ testing method are investigated for typical subgrade soils in Korea.

• Tribology and Lubricants
• /
• v.2 no.1
• /
• pp.46-52
• /
• 1986

얇은 유막위의 타이어 변형해석이나, 압착막댐퍼 설계등의 해석에 응용되는 변동 하중하의 탄성 경계상 유체 압착막의 해석을 Newton-Raphson 반복법을 사용하여 하였다. 유막두께의 계산은 등계수 요소를 사용하여 정확한 계산을 하였고 슬라이더의 궤적은 강쇄진동의 응답곡선과 유사함을 알 수 있었다. 특히 본 연구에서는 미끄럼 속도의 영향을 고려하였으며 유체가 베어링내에 생긴 포켓에 정체하고 있어서 미끄럼의 영향은 속도가 클때를 제외하고는 큰 영향을 미치지 못함을 알 수 있었다.

• Tunnel and Underground Space
• /
• v.12 no.1
• /
• pp.37-42
• /
• 2002

A back analysis algorithm was developed to determine the major parameters for tunnel design; the elastic modulus(E) and the ratio of horizontal to vertical stress(K). The algorithm is based on direct search method and was coded by FISH language of FLAC, a commercial finite difference program. Developed code was applied on some models to verify the validity and estimate the efficiency of the algorithm. Verification by theoretical solutions and published results of Gens' research, was successful.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2411-2425
• /
• 2013

In the design of pile foundation on the rock layer in the stratified structure with sedimentary and rock layers, the structural analysis of the stratified rock layer is required to determine the failure modes (flexural failure, punching shear failure or end bearing failure) and the bearing capacity of the rock layer. However, the existing usable Elastic Plate Analysis Method (EPAM) suggested by ACI committee 436 and Korean Code Requirements for Structural Foundation Design is very complex, and engineers have many difficulties in using it. Therefore, in this research, we proposed the relatively simple Circular Foundation Analysis Method (CFAM) with the concept and the equation of the equivalent effective width (radius) instead of the complex EPM, and the related equations of bending moment and shear force to be equal to the analysis results of EPAM. As a result, the proposed CFAM using the equivalent effective width (radius) is simple and convenient to use, and the analysis results of it are very good in their accuracies comparing those of EPAM and Finite Element Method.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.55-60
• /
• 2005

Plate that have cutout inner bottom and girder and floor etc. in hull construction absence is used much, and this is strength in case must be situated, but establish in region that high stress interacts sometimes fatally in region that there is no big problem usually by purpose of weight reduction, a person and change of freight, piping etc.. Because cutout's existence gnaws in this place, and, elastic buckling strength by load causes large effect in ultimate strength. Therefore, perforated plate elastic buckling strength and ultimate strength is one of important design criteria which must examine when decide structural elements size at early structure design step of ship. Therefore, and, reasonable elastic buckling strength about perforated plate need design ultimate strength. Calculated ultimated strength change several aspect ratioes and cutout's dimension, and thickness in this investigation. Used program applied ANSYS F.E.A code based on finite element method.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.2 s.69
• /
• pp.257-265
• /
• 2004

The aim of this study is to investigate the inelastic buckling behavior of the beams under moment gradient using a line-type finite element method. The method is incorporated the non-uniform yielding of the cross-section caused by the presence of residual stress and accepted model of residual stress so called 'simplified' and 'polynomial' pattern is adopted in this study. The inelastic lateral-torsional buckling results obtained in this study is compared with the buckling results obtained from the design method based on the allowable stress method given in Korean Steel Designers Manual (KSDM 1995). This study have found that the design method in KSDM (1995) is conservative without and with intermediate bracing applied at the mid span of the beam, and there is some scope for improving the provisions of KSDM (1995)

• Journal of the Korean Geophysical Society
• /
• v.4 no.1
• /
• pp.11-20
• /
• 2001

Seismic refraction and electrical resistivity surveys were conducted in Bangeosan Maaebul site located in Haman, Kyungnam, in order to present geophysical safety analysis method for masonry cultural properties. Seismic refraction exploration revealed that the ground was composed of three layers in term of seismic wave velocity; the upper, medium, and lower layers. The low velocity ranging from 308 to 366 m/sec in upper layer suggests weathered soil, the intermediate velocity from 1906 to 2090 m/sec in the medium layer indicates weathered rocks, and the high velocity from 5061 to 5650 m/sec in the lower layer implies extremely hard rocks. Our seismic result suggests that the upper and medium layer around the Maaebul should be reinforced to support the construct. The result of electric resistivity survey shows that there exists a low resistivity zone, ranging from 131 to 226 Ohm-m, at the right side of the Maaebul with the direction of NE-NNE. This area is the weakness zone as it plays role of the underground water passage in rainy season.