• The Journal of the Acoustical Society of Korea
• /
• v.36 no.1
• /
• pp.1-11
• /
• 2017

In this study, novel approximate form of the square-root operator of three dimensional acoustic Parabolic Equation (3D PE) is proposed using a rational approximant for two variables. This form has two advantages in comparison with existing approximation studies of the square-root operator. One is the wide-angle capability. The proposed form has wider angle accuracy to the inclination angle of ${\pm}62^{\circ}$ from the range axis of 3D PE at the bearing angle of $45^{\circ}$, which is approximately three times the angle limit of the existing 3D PE algorithm. Another is that the denominator of our approximate form can be expressed into the product of one-dimensional operators for depth and cross-range. Such a splitting form is very preferable in the numerical analysis in that the 3D PE can be easily transformed into the tridiagonal matrix equation. To confirm the capability of the proposed approximate form, comparative study of other approximation methods is conducted based on the phase error analysis, and the proposed method shows best performance.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.4
• /
• pp.1-13
• /
• 2003

For spatial free vibration of non-symmetric thin-walled curved beams with shear deformation, an improved formulation is proposed in the present study. The elastic strain and the kinetic energies are first derived by considering constant curvature and shear deformation effects due to shear forces and restrained warping torsion. Next equilibrium equations and force-deformation relations are obtained using a stationary condition of total potential energy. And the finite element procedures are developed by using isoparametric curved beam element with arbitray thin-walled sections. Particularly not only shear deformation and thickness-curvature effects on vibration behaviors of curved beams but also mode transition and crossover phenomena with change in curvatures of beams are parametrically investigated. In order to illustrate the accuracy and the reliability of this study, various numerical solutions for spatial free vibration are compared with results by available references and ABAQUS's shell element.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.4
• /
• pp.77-86
• /
• 2016

A numerical analysis is performed to investigate the effect of a supply channel and jet hole arrangement on the heat flow characteristics of impingement jet. The jet holes in a supply channel are composed of a single or staggered array from the center of a leading edge channel. The software ICEMCFD is used to generate the structured grids for calculation domain and a CFD code CFX 15.0 to perform the simulation. The present solutions are validated by comparison with the experimental and numerical ones of others. A comparison of mass flow rates of impingement jets and Nusselt numbers on the impingement surface for the single or staggered arrays is made.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.120-120
• /
• 2022

우리나라 친환경 에너지 생산의 주요 축을 담당하고 있는 양수발전댐의 홍수 시 정교한 수계운영을 위한 방안으로 강우-유량-댐 수위 매트릭스(이하, PDH Matrix)를 개발하고 양수발전소상-하부댐 연계 운영에 따른 홍수 영향을 분석하였다. 연구 대상지역은 강원도 양양군 서면에 위치하고 있는 국내 최대 양수발전소인 양양양수 발전소로 총 저수용량 92만 m³의 콘크리트 중력식댐으로 유역면적은 약 125 km²이다. 양양양수 발전댐의 수계운영을 위한 PDH Matrix는 지속기간별 강수량 규모에 따른 홍수량 및 댐 최고수위 추정치를 판단할 수 있는 조견표로 강우규모 30 - 360 mm (30분 간격, 12개 강우규모) 및 지속기간 1-24시간 (1시간 간격, 24개 지속기간)인 총 288개의 강우조건별 홍수수문곡선을 개발하였다. 개발된 홍수수문곡선을 입력자료로 기존 댐 운영 방식인 AutoROM을 적용하여 저수지 홍수추적을 HEC-ResSim 모형으로 수행하고 최종적으로 개별 강우사상에 대한 강수량-유량-댐 수위 테이블을 작성하였다. 홍수기 댐 운영에 따른 최고수위는 초기 댐 수위조건에 따라 변동되므로 초기 댐 수위 조건(EL. 115 - 117 m, 1 m 간격)별 PDH Matrix를 각 각 개발하였다. 또한, 양수발전소의 특성상 상부댐으로 양수 또는 발전 방류에 따라 홍수 시 댐의 치수안전성에 미치는 영향이 크므로 상, 하부댐 운영에 따른 홍수영향 분석을 수행하였다. 구체적으로 하부댐에서 상부댐으로 양수 시 시간에 따른 하부댐 저수지의 수위변화 양상을 추정하였으며 극한적 홍수상황을 고려하기 위하여 상부 저수지가 만수인 상황에서 불가피하게 하부댐으로 방류가 필요한 상황에 대비한 홍수기 운영방안을 제안하였다. 본 연구는 하부댐-상부댐을 연계하여 운영하는 양수발전댐의 홍수기 수계 운영 방안을 수립한 첫 연구로 향후 연구에서 개발한 강우-유량-댐 수위 매트릭스(PDH Matrix) 작성 기법을 타 양수발전소 수계 운영 시 활용할 수 있을 것으로 기대된다.

• Korean Journal of Social Welfare
• /
• v.37
• /
• pp.89-118
• /
• 1999

The goal of this paper is to define the distinguishing characteristics of Korea's National Pension Scheme compared to the National Pension types of other countries and sees if those characteristics are significant enough in order to warrant calling these the "Korean Model". Also, another point to consider is, if this "Korean Model" does indeed exist, whether it is a 'sustainable' model or not. The National Pension Scheme, which was implemented in 1988, is similar to the public pension system formerly used in Japan. The National Pension Scheme broke away from this 'Japanese Model' in 1995 with implementation of the Farmers and Fishermen Pension, and the unique "Korean Model National Pension" was completed in 1998 with revision of the National Pension Law. The characteristics of the Korean National Pension can be defined as being balanced equally on ability and equality, possessing strong intergenerational income redistribution, having a nationally integrated structure, an incomplete funded method financial neutralism of the government and also as being a Monroe-oriented pension system. There are several limits to the sustainable development of this Korean Model National Pension, though. Even though the precondition of "the income determination problem of self-employed persons", which has strong intra-generational income redistribution. in actuality there are still many policy issues to be confronted such as the structure which 'transfers the burden to the future generation', the 'inter-generational inequity' of the incomplete funded system, persons excluded from coverage under the national integrated structure, 'compulsory loaning of the public sector by the National Pension Fund' under the government's principle of finance neutralism, the separate existence of the 'Monroe-oriented National Pension' from other pensions, etc.,. Therefore, it need to reform of NPS once again to sustainable development of KMNP.

• (The) Research of the performance art and culture
• /
• no.32
• /
• pp.701-738
• /
• 2016

The Geomungo(거문고) is a instrument of Gogureoy(高句麗). The instrument had covered a lot of Korea, so it have become a important musical instrument in Korea. Hayasi Genjo(林謙三), Japanese scholar, had maintained his opinion that the Geomungo of Gogureoy is the Wagonghu(臥??), and the Geomungo was formed later, the record of Kimbusik, wrighter of the History of Three Kingdom(三國史記), was incredible. Lee-Hyegu refuted his hypothesis because the introduction on the Wagonghu of Japan have been inaccurate. Since then, many scholars of Korea have studed on the Geomungo of Gogureoy. But their study of the Geomungo was inclined to the topic, relation of the Geomungo and the Wagonghu, or the Wagonghu, the origin of the Geomungo. And They have thought that the record of Kimbusik's was truth. Kimbusik had recorded that Wangsanak(王山岳) had made the Geomungo from the Chilheoyn-Geum(七絃琴, Seven stringed Zither. 古琴). But the Geomungo was different from Geum(琴), but similar to Wagonghu. Many ancient tomb have been unearthed in the old land of Gogureoy, and the were many tomb painting of Gogureoy Geomungo. They were many different style, the form, the size, the number of strings and the position of the musician. So I think that many various type of the Geomungo had been exsited in Gogureoy they had become a prestyle of the Geomungo. The Geomungo was originated from the Wagonghu, its form was similar to the Geomungo. The many scholars considered that it is truth, the Wagonghu was handed down from China, and was spreded to Japan. But there were the Wagonghu in the early Joseon(古朝鮮), The song of the early Joseon, Gongmudohaga(公無渡河歌). The song was accompanied by the Wagonghu. We can read off, at the Song, the Wagonghu had exsisted in the early Joseon. So I think cautiously on that point, the Wagonghu of the Early Joseon was old than that of China, and thd Geomungo of Gogureoy was originated from the Wagonghu of the Early Joseon.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.2
• /
• pp.12-26
• /
• 2014

This study has researched the forms of arrangement and use of the oddly shaped stones which were used at palaces during Joseon Dynasty based on arrangements of stones as shown in Donggwoldo(東闕圖), and tried to identify its special features. The sorts of stone's arrangements which set formal patterns by assisting an axis in Donggwoldo can be classified as the single type using one stone, the symmetrical type using 2 stones symmetrically and the parallel type using 3 or more stones. The single type was used to endow a focal point and to accent centrality by arranging a stone on the axis performed from formal shaped buildings. The symmetrical type was used to show order and hierarchy by placing two odd-shaped stones on either side of a building. And the parallel type which is arranged three stones side by side, is put a middle stone on the central axis line to determine strong directional and frontality. Also similarity to method of arrangement of stones can be found from planting trees in a prominent way for scenery or planting trees symmetrically. Stones and trees can be chosen according to nature and scale of places and basically their effects of formation of axis and creating typical space is same. Based on these respect, the characteristics of arrangement of stones shown in Donggwoldo can be briefly summarized as follows. First, the oddly shaped stones were used by creating a centripetal space in order to show a grade of rank. Second, the distances among stones could be adjusted to the sizes of the architecture which was at the center. The aim was to provide stability through the balanced composition between the central axis and symmetrical structures. Third, the form of regularity was added by using stone vase in consideration of irregular shape of stone causing interference in forming regular symmetry. Fourth, a centrality was emphasized by adding change to central stones in the parallel type used 3 erect stones. Fifth, the sizes of stone were limited in order to make smooth for the mix and adjustment of its position with the types of other garden ornaments, so the oddly shaped stones in palace have portability. Sixth, the oddly shaped stones in palace which were appreciated as inspirational object basically were a sculpture of the same quality with suiseki (壽石), and the appreciative method, the composition and shape had developed in the same texture. Finally, the even number of stones by parallel type were arranged by equal partition. But odd number of stones followed the method with symmetrical arrangement on its center stone. These principles of stone arrangement are judged as distinguishing methods which oddly shaped stones was made and used in Joseon palaces.

• Journal of Practical Engineering Education
• /
• v.15 no.1
• /
• pp.119-126
• /
• 2023

Today, in order to improve fuel efficiency and dynamic behavior of automobiles, an era of light weight and simplification of automobile parts is being formed. In order to simplify and design and manufacture the shape of the product, various components are integrated. For example, in order to commercialize three products into one product, product processing is occurring to a very narrow area. In the case of existing parts, precision die casting or casting production is used for processing convenience, and the multi-piece method requires a lot of processes and reduces the precision and strength of the parts. It is very advantageous to manufacture integrally to simplify the processing air and secure the strength of the parts, but if a deep and narrow pocket part needs to be processed, it cannot be processed with the equipment's own spindle. To solve a problem, research on cutting processing is being actively conducted, and multi-axis composite processing technology not only solves this problem. It has many advantages, such as being able to cut into composite shapes that have been difficult to flexibly cut through various processes with one machine tool so far. However, the reality is that expensive equipment increases manufacturing costs and lacks engineers who can operate the machine. In the five-axis cutting processing machine, when producing products with deep and narrow sections, the cycle time increases in product production due to the indirectness of tools, and many problems occur in processing. Therefore, dedicated machine tools and multi-axis composite machines should be used. Alternatively, an angle spindle may be used as a special tool capable of multi-axis composite machining of five or more axes in a three-axis machining center. Various and continuous studies are needed in areas such as processing vibration absorption, low heat generation and operational stability, excellent dimensional stability, and strength securing by using the angle spindle.

• 한국해양학회지
• /
• v.27 no.4
• /
• pp.277-289
• /
• 1992

Kyeonggi Bay, a macrotidal coastal embayment in the Yellow Sea coast of central korea, is fringed by vastly developed tidal flats. About 400 surface sediment samples were collected from the intertidal and subtidal zones of Kyeonggi Bay for a study of the sediment distribution pattern and the surface sediment characteristics of this environment. The kyeonggi Bay surface sediment becomes progressively finer in the shoreward direction, from offshore sand to shoreward silty sand and sandy silt. This shoreward-fining trend is repeated again on the tidal flat and, as a consequence, a grain-size break occurs near the low-water line which separates the intertidal area from the subtidal one. The intertidal and subtidal sediments differ from each other in textural characteristics such as mean grain size and skewness and this can be interpreted to result from differences in hydraulic energy and morphology between the two environments. The mineral and chemical compositions of the Kyeonggi Bay sediments are largely controlled by the sediment grain size. Smectite was nearly absent in the clay mineral assemblage of Kyeonggi Bay sediment. The contents of Co, Cu and Ni were high in the Banweol tidal flat, which suggests a continuous process of accumulation of these metals. the intertidal environment appears to respond rapidly to artificial coastal modifications, the effects of which should be taken into consideration when planning a dam construction or coastal reclamation.

• Journal of Chest Surgery
• /
• v.38 no.12 s.257
• /
• pp.866-869
• /
• 2005

Langerhans Cell Histiocytosis (LCH) is a pathologic proliferation and infiltration of various organs by Langerhans' cells of unknown cause. Incidence rate of one million parties 3$\∼$4 is seen in young child but the incidence is not sure in adult. Organ systems involved by LCH may include skin, ear, bone marrow, liver, spleen, lung, pituitary gland - hypothalamus and Gl tracts. In case pituitary-hypothalamus axis are involved, diabetes insipidus happened. Primary Pulmonary Langerhans Cell Histiocytosis(PLCH) with uninvolvement of other organs is rare and accompanied diabetes insipidus is more rare. There are many cases of LCH with diabetes insipidus involve such as central nervous system except lung. PLCH accompany central diabetes insipidus is only 1 case. We report a case of PLCH that accompany central diabetes insipidus with literature investigation in Department of Thoracic and Cardiovascular Surgery, Hallym University.