• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.2
• /
• pp.6-13
• /
• 2011

This paper deals with the interconnection problem in ad-hoc networks or sensor networks, where relay nodes are deployed additionally to form connections between given nodes. This problem can be reduced to a NP-hard problem. The nodes of the networks, by applications or geographic factors, can be deployed densely in some areas while sparsely in others. For such a case one can make an approximation scheme, which gives shorter execution time, for the additional node deployments by ignoring the interconnections inside the dense area of nodes. However, the case is still a NP-hard, so it is proper to establish a polynomial time approximation scheme (PTAS) by implementing a dynamic programming. The analysis can be made possible by an elaboration on making the definition of the objective function. The objective function should be defined to be able to deal with the requirement incurred by the substitution of the dense area with its abstraction.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.1
• /
• pp.105-111
• /
• 2003

Wheel for passenger car support the car weight with tires, and they transmit rolling and braking power into the ground. Whittling away at wheel weight is more effective to boost fuel economy than lighting vehicle body structure. A shape of hole in disk is optimized for minimizing the weight of steel wheel. Pro/ENGINEER program is used for formulating the design model, and ANSYS package is selected for analyzing the design model. It has difficulties to interface these commercial software directly. For Combining both programs, response surface methodology is applied to construct approximation functions for maximum stresses and maximum displacements are obtained by full factorial design of five levels. This steel wheel is modeled in 14-inch diameter of rim, and wide parameter of hole in disk is only selected as design variable for reducing the weight of steel whee. PLBA(Pshenichny-Lim-Belegundu-Arora) algorithm, which used the second-order information in the direction finding problem and uses the active set strategy, is used for solving optimization problems.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.1
• /
• pp.17-25
• /
• 2017

Relocation and expansion of existing port facilities are necessary given this increase in marine traffic volume and the presence of larger entering vessels. Therefore, this study focused on anchorage among water facilities, and examined the degree of harmony between anchorage and other water facilities at Yeosu Kwangyang Port. The number of anchoring vessels in relation to anchorage over the past 5 years, total anchored hours by anchorage-years, average number of simultaneously anchored vessels by anchorage-years, maximum number of simultaneously anchored vessels by anchorage, and maximum size of anchored vessels by anchorage have been surveyed. The minimum anchorage radius has been calculated according to the designated anchorage capacity according to anchorage. Finally, improvement plans for Yeosu Kwangyang Port's anchorage have been suggested, including relocating of Yeosu no. 2 anchorage, expanding of Kwangyang no. 1 ~ 5 anchorage, relocating of Kwangyang no. 8 ~ 9 anchorage, and repealing of Kwangyang no. 11 anchorage.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.7
• /
• pp.9-16
• /
• 2008

For the efficient routing on a Sensor Network, one may consider a deployment problem to interconnect the sensor nodes optimally. There is an analogous theoretic problem: the Steiner Tree problem of finding the tree that interconnects given points on a plane optimally. One may use the approximation algorithm for the problem to find out the deployment that interconnects the sensor nodes almost optimally. However, the Steiner Tree problem is to interconnect mathematical set of points on a Euclidean plane, and so involves particular cases that do not occur on Sensor Networks. Thus the approach of using the algorithm does not make a proper way of analysis. Differently from the randomly given locations of mathematical points on a Euclidean plane, the locations of sensors on Sensor Networks are assumed to be physically dispersed over some moderate distance with each other. By designing an approximation algorithm for the Sensor Networks in terms of that physical property, one may produce the execution time and the approximation ratio to the optimality that are appropriate for the problem of interconnecting Sensor Networks.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.2
• /
• pp.43-52
• /
• 2019

The purpose of this study is to classify the building layout and plan types according to the urban location, use and function of civil and to analyze the characteristics by the type classified. After constructing a framework (Mathia type, Nagaya type, Detached House type) for analyzing Modern Private Housing Architecture in Gunsan, the research was conducted on 30 representative buildings, and a plot plan, a floor plan and elevation were created. After analyzing the relationship between the lot of land and the urban street, we classified the type of arrangement into Mathia type and Nagaya type which directly enter the building from the road, and derived the Detached House type which indirectly enters from the road. When we look at the use of the derived arrangement types, most of the Mathia type are commercial and residential buildings, and some of them are specially designed for commercial buildings. The Nagaya type appears in the form of commercial and residential house or residential private house, and the Detached House type is classified as residential style. As a relation with the urban street, the Mathia type and the Nagaya type are generally located on the main urban street, whereas the Detached House type is located on the small urban street. As a result of analyzing, the floor plan was changed according to the plot plan. The plan of the Mathia and Nagaya type are arranged to enter directly from the street, with commercial space being mainly located on the street, and the residential space being composed on the back or the second floor. the plan of the Detached House is a type that enters indirectly into the interior through a separate space (Courtyard), and forms an organic space between the residential interior and the front and rear yard. The purpose of this study is to investigate the Characteristics of a plot plan and a floor plan of Modern Private Housing Architecture in Gunsan by means of analysis considering the urban street, Uses of buildings, Construction method and the yard through actual measurement.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.2
• /
• pp.12-26
• /
• 2014

This study has researched the forms of arrangement and use of the oddly shaped stones which were used at palaces during Joseon Dynasty based on arrangements of stones as shown in Donggwoldo(東闕圖), and tried to identify its special features. The sorts of stone's arrangements which set formal patterns by assisting an axis in Donggwoldo can be classified as the single type using one stone, the symmetrical type using 2 stones symmetrically and the parallel type using 3 or more stones. The single type was used to endow a focal point and to accent centrality by arranging a stone on the axis performed from formal shaped buildings. The symmetrical type was used to show order and hierarchy by placing two odd-shaped stones on either side of a building. And the parallel type which is arranged three stones side by side, is put a middle stone on the central axis line to determine strong directional and frontality. Also similarity to method of arrangement of stones can be found from planting trees in a prominent way for scenery or planting trees symmetrically. Stones and trees can be chosen according to nature and scale of places and basically their effects of formation of axis and creating typical space is same. Based on these respect, the characteristics of arrangement of stones shown in Donggwoldo can be briefly summarized as follows. First, the oddly shaped stones were used by creating a centripetal space in order to show a grade of rank. Second, the distances among stones could be adjusted to the sizes of the architecture which was at the center. The aim was to provide stability through the balanced composition between the central axis and symmetrical structures. Third, the form of regularity was added by using stone vase in consideration of irregular shape of stone causing interference in forming regular symmetry. Fourth, a centrality was emphasized by adding change to central stones in the parallel type used 3 erect stones. Fifth, the sizes of stone were limited in order to make smooth for the mix and adjustment of its position with the types of other garden ornaments, so the oddly shaped stones in palace have portability. Sixth, the oddly shaped stones in palace which were appreciated as inspirational object basically were a sculpture of the same quality with suiseki (壽石), and the appreciative method, the composition and shape had developed in the same texture. Finally, the even number of stones by parallel type were arranged by equal partition. But odd number of stones followed the method with symmetrical arrangement on its center stone. These principles of stone arrangement are judged as distinguishing methods which oddly shaped stones was made and used in Joseon palaces.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1754-1759
• /
• 2008

To produce plastic parts that have fine pattern through conventional injection molding, a lot of difficulties follow. Therefore, rapid heating and cooling methods are good candidates for manufacturing injection-molded parts with micro/nano patterns. In this study, we adopted the E-Mold patent technology. The mold for E-Mold technology has a separate heated core with micro heaters. It is very important to optimize the lay-out of the heaters in heated core because it influences both control and distribution of mold temperature. We developed a optimization method of heating line lay-out by using commercial softwares and compared the output with the experimental results. We used Pro-Engineer Wildfire 2.0 for the mold design, ICEMCFD for mesh generation, and FLUENT for heat transfer simulation. The simulation results showed the temperature profile from $60^{\circ}C$ to $120^{\circ}C$ or $180^{\circ}C$ during heating and cooling process which were compared with the injection molding experiments. We concluded that the simulation could well explain the experimental results. It was shown that the E-Mold optimization design for heater lay-out could be available through the simulation.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.17 no.3
• /
• pp.26-34
• /
• 2018

This research is a pre-research to find out profit module of 20 students in a classroom. I researched the widths of passages in the 30 classrooms of 5 elementary schools in Nothern Kyeonggi-do. I found the conclusions as follows. 1st, the area of 1 student's unit is $650(W){\times}950(D)$ 2nd, most of classrooms' students table placements are one-way types(77%). U-types are 13%. group study-types are 7% 3rd, The width between blackboard and front student's table is 2.08m. The width of passage between back seat and backboard is 1.12m. The width of passage between side wall and near student's table is 0.89m. The width of passage between window and near student's table is 0.74m. The width of vertical passage(A) between student's tables is 0.68m. The width of vertical passage(B) between student's tables is 0.7m. 4th, The area of teachers' is $2.1m{\sim}2.25m{\times}2.1m=4.41{\sim}4.73m^2$

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.251-256
• /
• 2021

This study analyzed the most frequently used navigation cases in a desktop environment. As a result of the research, GNB induces users' search as the top element of the search structure and can place color, text, icon, and image elements. LNB could be classified in the form of a dropdown, flyout, dropline and mega menu. In this study, the navigation structure of Interpark and Interpark among open markets used by users was analyzed. G-Market's GNB has a two-tier structure with color, text, image, and icon elements, and Interpark has a three-tiered horizontal label. Interpark's GNB drew attention by placing a badge on the seasonal label, which is a temporary content section, unlike G-market. It can be seen that the LNBs of both shopping malls have flyout menus that protrude when you mouse over the category menu arranged in a vertical text form under the logo placed on the left. The flyout menu has a complex structure consisting of the layout of the mega menu. This study is meaningful in revealing user experience elements by analyzing the GNB and LNB of shopping malls these days where internet shopping is increasing.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.19 no.4
• /
• pp.60-69
• /
• 2020

This research is a preliminary study to find out the module of 20 students in a classroom. This research investigated the widths of passages in the 30 classrooms of 5 elementary schools in Namyangju City, Korea. The conclusions were as follows: First, the area of unit for 1 student was 650 (W) × 950 (D). Second, the desk placements for most classrooms were one-way types (87%), and group-study types constituted 13%. Third, the width between the blackboard and the very front desk was 2.17 m. The width of passage between the very back seat and the backside lockers was 1.32 m. The width of passage between the sidewall and the nearby desk was 0.8 m. The width of passage between the window and the nearby desk was 0.8 m. The average widths of 2 vertical passages between the desks were respectively 0.67 m and 0.68 m. Fourth, the area of the teacher was 2.1-2.25 m × 2.16 m = 4.5-4.8 ㎡.