• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.336-336
• /
• 2011

본 연구에서는 강우시 경사지 밭에서 발생하는 토양유실량을 저감하기 위하여 지표피복재의 유무와 강우강도를 달리하여 실외인공강우 실험을 통하여 평가하였다. 인공강우 실험은 경사도 28%와 각 시험포는 $5\times30m$의 크기로 strawmat+PAM+sawdust, control(bare), strawmat+PAM, strawmat+PAM+rice husks를 4개 조성하고, 각 시험포는 하단부에 강우유출수를 채취할 수 있는 설비(flume)를 설치하였다. 대조구 실험을 위하여 각 시험포에서 발생하는 직접유출량과 유사량을 비교 분석하였다. 시험포의 토양은 양질사토로 일반 고랭지 밭의 흙과 동일한 성질을 가지고 있는 토양을 사용하였고, 지표 피복처리는 straw mat, saw dust, rice husk 그리고 PAM 등 4개의 재료를 사용하였다. 인공강우 실험은 1차 10월 18일, 2차 10월 24일, 3차 10월 30일, 4차 11월 7일로 총 21일간 각각 약 1주일의 간격을 두고 실시하였으며 인공강우 시험기의 강우강도는 각 31.1 ~ 44.4 mm/hr로 모의하였다. 연구결과 시험포에서 발생한 유출량은 지표피복을 하지 않은 대조구 시험포보다 지표를 피복한 시험포에서 약 15.7 ~ 19%의 감소한 것으로 나타났다. 유사량은 대조구 시험포보다 약 93.1 ~ 99.3% 감소한 것으로 나타났으며, 유출량과 유사량은 straw mat+PAM+sawdust와 straw mat+PAM+rice husk를 적용한 시험포에서 저감효과가 큰 것으로 나타났다. 이와 같이 지표피복처리는 강우가 발생하였을 때 강우타격력의 감소와 유출수의 유속감소 그리고 침투능을 증가하는 역할을 하여 경사지, 농경지 및 공사현장에서 토양 유실을 저감하며, 하천이나 강으로 유입되는 탁수량의 저감에 큰 효과가 있을 것으로 판단된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.554-554
• /
• 2009

지구온난화는 범지구적 환경문제로 매우 빠른 속도로 진행되면서 그 심각성을 더해가고 있다. 특히 해수면 상승이나 대형 태풍, 홍수, 가뭄 등의 이상기후가 빈번하게 발생되며 생태계에도 심각한 타격을 주고 있다. 이러한 지구온난화를 유발하는 물질들에 대해 도쿄의정서(Annex A)에 6대 온실가스($CO_2$ (이산화탄소), 메탄($CH_4$), $N_2O$(아산화질소), PFC(불화탄소), HFC(수소화불화탄소), $SF_6$(육불화황))로 정의 하여 규제대상으로 분류하고 있다. $CO_2$를 제외한 Non-$CO_2$ 온실가스들은 배출량이 $CO_2$에 비해 매우 낮지만 GWP(지구온난화지수)가 매우 커 지구온난화에 미치는 영향이 상당하다. 최근 이산화탄소 이외에 지구온난화 문제를 일으키는 온실가스에 대한 많은 관심으로 대상가스의 처리 또는 재활용을 위한 신기술 및 신공정 개발에 박차를 가하고 있다. 온실가스 중 HFCs는 GWP가 1300으로 미량의 배출로도 심각한 기후변화를 일으킬 수 있는 물질로, 우리나라의 경우 1990년 이후 HFCs 배출량 증가율은 연 평균 4.9% ~ 13.8%이다. 국내외 온실가스 처리기술은 대부분 CO2에 대한 연구개발 및 실증화가 지배적이고, non-CO2에 대한 처리기술 개발수준은 미흡할 뿐만 아니라 본 연구 대상인 HFCs 의 경우에는 처리기술 연구개발이 전무하다. 특히 HFCs는 냉매 또는 발포제로 사용되는데 일반적으로 사용 후 특별한 처리과정 없이 대기중으로 배출된다. 본 연구에서는 non-CO2 가스인 HFC-134a 를 대상으로 혼합가스에서 분리 회수를 위해 하이드레이트 기술을 접목시켜 경제적, 친환경적인 기술개발을 목적으로 한다. kinetic 반응장치와 고압반응기 및 magnetic drive system 을 이용하여 stirring speed와 driving force에 따른 HFC-134a 하이드레이트 형성속도의 상관관계를 제시하고자 한다.

• Convergence Security Journal
• /
• v.15 no.6_1
• /
• pp.25-31
• /
• 2015

It depend on relative combat power, patriotism and cohesion of citizen to victory in the battlefield. This stu dy try to analysis why the Germany army fail 'the Battle of the Bulge'. The Germany army plan of maneuve r to attack the France army was surprise attack in the beginning of World War II. The Germany army have initiative to make breakthrough Ardennes Ridge. The operation of the Ardennes Offensive Operation and the Battle of the Bulge is the typical features of blitzkrieg shock. However, the results are extremely different. In the course of the operational planning and decision the course of action, military security is most important fa ctor. We can see the truth in 'the Battle of the Bulge'.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.8
• /
• pp.978-984
• /
• 2020

In this study, the correlation between sports records and weather data was analyzed using the big data analysis method. To this end, data was collected by API and crawling, data was processed, statistics were performed, and data visualization was performed. The subject of this study was a player who entered the regular at-bat among outfielders in the 2019 KBO League. In addition, meteorological data were analyzed by using the unpleasant index and above 70 and below 70. As a result of the study, in the various hitting indicators, which are the records that pitchers intervene, the higher the unpleasant index, the better the outfielder's record, but pitchers, walks, pitches, pitching success rates, pitches per turn, pitches per game From the records of the back, it was found that the outfielder made the pitcher difficult. It is expected that this study will help the development of the sports data industry and the performance of baseball players, baseball teams, and coaching staff.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.11
• /
• pp.965-972
• /
• 2016

This paper presents results of flight experiments on a navigation algorithm including multiplicative extended Kalman filter for estimating attitude of the guided munition. The filter describes orientation of aircraft by data fusion with low-cost sensors where measurement update is done by multiplication, rather than addition, which is suitable for quaternion representation. In determining attitude from vector observations, the existing approach utilizes a 3-axis accelerometer as a 2-axis inclinometer by measuring gravity to estimate pitch and roll angles, while GNSS velocity is used to derive heading of the vehicle. However, during accelerated maneuvers such as coordinated flight, the accelerometer provides inadequate inclinometer measurements. In this paper, the measurement update process is newly defined to complement the vulnerability by using different vector observations. The acceleration measurement is considered as a result of a centrifugal force and gravity during turning maneuvers and used to estimate roll angle. The effectiveness of the proposed method is verified through flight experiments.

• Composites Research
• /
• v.29 no.2
• /
• pp.73-78
• /
• 2016

In this paper, The concept of a wheel with carbon fiber composite is to replace the conventional material used for a wheel hub, such as plastic, with a disk-type hub made of carbon fabric and epoxy resin. The impact load from the ground under real conditions was considered; a low-velocity impact test was conducted to evaluate the impact performance of the carbon wheel and compare it with that of a conventional plastic wheel. This study applied a 70 J impact load as a test condition. The impact energy was controlled in the test by adjustment of height and weight of impactor. The use of a carbon disk wheel hub was confirmed to reduce weight and generate an excellent repulsive force at low energy under conditions similar to real driving conditions. The results showed that the maximum load increased proportionally depending on the impact load, but the growth of the maximum load was reduced at a 20 J impact load and tended to decrease at a 45 J impact load. The carbon wheel showed excellent properties ; the level of rebounding was 35.3% and 19.1% of the total impact energy at impact loads of 5 J and 10 J, respectively. On the other hand, the carbon disk wheel rebounded less than 5% of the total energy due to crack generation of the thin carbon hub for impact loads of more than 20 J.

• Journal of Navigation and Port Research
• /
• v.31 no.3 s.119
• /
• pp.197-204
• /
• 2007

Busan Port has been facing critical situation in terms of container handling volume, especially growth rate of transshipment(T/S) container of the year of 2006 was at a standstill. Annual average growth rate of T/S container during the period of 2003 to 2006 slowed down to 7.7% while it recorded over 34% to the period of 1999 to 2002. It has mainly resulted from the change of circumstance of Northeast Asian ports, that is, firstly mega carriers' increasing direct call to Northern Chinese ports such as Qingdao, Tianjin and Dairen effected to T/S container volume of Busan port, secondly start to operate deep-water port of Shanghai, thirdly Japanese super hub port project to handle their local containers at domestic ports. This paper aims to analyze the T/S type of inter-routes and hub and spoke and statistical status of Busan port. The purpose of the paper is to propose new concept which is to attract T/S container utilizing hub port function of Busan port in Northeast Asia It is that mega carriers are given dedicated terminals to use Busan port as T/S base in the region.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.4
• /
• pp.33-38
• /
• 2018

The internal erosion due to poor compaction of the material was the main cause of collapse of the embankment in Korea. The assessment of the compaction state of the dam body was a very important check in the safety diagnosis of the embankment. In this study, the correlation between dynamic cone penetration test and plate loading test which is the most typical compaction evaluation technique was analyzed to verify the applicability of the dynamic cone penetration test in evaluating the compaction state of the dam body. The standard penetration tests were carried out six times to define soil properties and depth of the test site. The spatial distributions were obtained by the Kriging method after 15 times of plate loading tests and 47 times of dynamic cone penetration tests. The Pearson correlation coefficient between the spatial distribution of the plate loading test and the dynamic cone penetration test spatial distribution at the constant penetration depth was calculated. The load distribution in the plate loading test and the blow counts at penetration depths of 5 cm, 10 cm and 15 cm in the dynamic cone penetration test showed a weak positive correlation.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.1
• /
• pp.3-12
• /
• 2006

The purpose of this study is to describe the Non-Destructive Testing(NDT) of the rockbolt and investigate the applicability of the NDT methods to estimate the integrity of the rockbolt. To examine the rockbolt integrity including rockbolt itself and grouting material, two methods are adopted: numerical and experimental methods. In the numerical method, the numerical code DISPERSE is used to analyze the dispersion of the rockbolt. The dispersion curve shows the effects of the thickness and stiffness of grouted materials on the embedded rockbolt. Therefore, the optimal frequency for the integrity test of the rockbolt is obtained: 20~120kHz in L(1,0) mode. In the experimental methods, destructive and non-destructive tests are carried out in a laboratory. In the non-destructive test, the low frequency mode generated by an impact and t he high frequency mode generated by an ultrasonic transducer seem to characterize the rockbolt condition readily. The experimental results show that the guided waves attenuate more significantly when the stiffness of the grouted material increases and/or the zone of the defect increases. Meanwhile, the ultimate capacity of rockbolt was evaluated through the pull-out tests and is compared to the NDT results. This study demonstrates that the NDT is a valuable tool for the rockbolt integrity evaluation.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.777-783
• /
• 2015

Wood is an anisotropic material that shows the changes in hardness, quality and dimensions depending on the types of cells on three cross sections, size, array and so on. It can also be used in different ways according to its use, which requires a meticulous research, in order to maximize the utilization by understanding the nature and use; and by clarifying the theory and technologies. The research on relationship among wood's physical properties, density, and elasticity of modulus have been studied in Korea and abroad, but those studies were based on correlation gained through standardized specimen. Rather, the study on complete product is rare. Moreover, the previous reports are mostly concentrating on vibration mode and batting, though the wood's physical properties as a material have not been in the main focus. Therefore, this study will carried out for analyzing MOE through figuring material property out and comparing frequency adapting to the Canadian HardMaple bat. For comparison of material properties, we studied the annual ring and density of the bat; calculated the MOE with resonance frequency and formula (ASTM C1259); and verified the repulsive force of this material. As a result, the relevance of the resonance frequency and annual ring is weak, and in comparison in the grain direction in wood, the MOE value is higher when the grain direction in wood is excited horizontally than when is excited vertically, because the material is repulsive when grain direction is horizontal.