• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.440-445
• /
• 2002

공압쿠션실린더(${\psi}80{\times}500^{st}$)의 쿠션장치인 쿠션슬리브(${\psi}20{\times}28^{st}$) 4종(Model #a, Model #b, Model #c, Model #d) 모델을 제작하여 수직하강하는 실린더에 각각 장착한 후, 각 모델에 따라 압력과 부하 특성을 비교하였다. 동일한 실험조건인 공급압력($5kg_{f}/$\textrm{cm}^2$)과 부하하중($70kg_{f}$)에서 각 모델별 실험을 실행하였다. 각 모델별 실험에서, Model #c의 쿠션슬리브인 경우가 가장 적합한 형상임을 알 수 있었다.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.3
• /
• pp.261-266
• /
• 2003

이 논문에서는 반능동 진동 흡수기를 통합 시트/섀시 현가 장치에 확대, 적용하여 그 성능을 조사하였다. 통함 현가시스템의 성능분석을 위해 집중 인체질량과 함께 실험적으로 입증된 한 비선형 시트 쿠션 모델을 도입하였다. 또한 3 자유도 시트/섀시 현가시스템의 효과적인 진동제어를 위해 리아푸노브 바이스테이트 제어법칙을 사용하였다. 시뮬레이션결과 반능동 통합 현가장치는 시트 쿠션 모델과 관계없이 운전자의 승차감과 관련 있는 시트의 절대가속도 크기와 시트쿠션의 시트 트랙에 대한 상대변위를 상당히 감소시킬 수 있음을 알 수 있었다. 그러나, 주로 사용되어온 선형 쿠션 모델을 사용한 경우보다 비선형쿠션 모델을 사용한 경우의 제진성능이 약간 저조함을 알 수 있었다. 따라서, 자동차 시트 설계시 성능분석을 위해서는 실제의(비선형의) 시트 쿠션 특성을 적용해야 함을 알 수 있다.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.12
• /
• pp.33-43
• /
• 2006

Driving tests using model plastic piles with different hammer cushion materials were performed in order to evaluate the efficiency of energy transfer ratio from the hammer, degree of vibration of the surrounding ground and noise due to impacting. A small pile driving analyzer (PDA) was composed using straingages and Hopkinson bar which is measuring force signal and pile-head velocity. The hammer cushion (cap block) materials used for the model driving tests were commercial Micarta, plywood, polyurethane, rubber (SBR) and silicone rubber. The highest energy transfer ratio was obtained from Micarta in the same soil and driving conditions. Micarta was followed by polyurethane, plywood, rubber and silicone in descending order. The more efficient energy transfdr ratio of the hammer cushion materials became, the bigger average noisy (sound) level was found. In addition, Micarta and polyurethane provided bigger bearing capacities than other materials compared in the same soil and driving conditions in which the static loading tests were performed at the end of driving.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.5
• /
• pp.33-42
• /
• 2010

In this study, we have proposed a simple cardiorespiratory monitoring method based on displacements of human body which occurs due to periodic heartbeat and breathing. The proposed system consists of an aircushion, pressure sensing hardware and heartbeat and respiration signals extraction algorithm. The aircushion was used for unconstrained measurement of the respiration and heartbeats without a sensor attached on the subject's skin surface. The displacements of subject sitting on the aircushion cause small pressure variations. These variations are amplified and filtered with the pressure sensing hardware. Finally, heart rate and respiration rate are extracted by signal processing algorithm based on frequency domain filter. To evaluate the performance, extracted respiration and heart rate from proposed system were compared with conventional methods. The average sensitivity of respiration and heart rate are 98.67% and 99.24%, respectively. These results show the proposed method has advantages of installing and processing simplicity so as to be used easily in unconstrained respiration and heart rate monitoring in daily life.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.435-439
• /
• 2002

In the pneumatic system, pneumatic cylinder is wildly used to factory automation. In general, Pneumatic cylinder problems are occured with colliding to stroke end part at which piston collide to end-cap, head cap and tube when piston is loading. This appearances have a short life of cylinder and is due to system destruction. This study examines the dynamic characteristics of pneumatic cushioning cylinder and cushion sleeve design. At head part cushion chamber for the vertical experimental, The decisions of cushioning effect and the results of the experimental research are obtained to the followings: i) The cushioning effects could acqure to the reserch, if the compressible energy is more than kinetic ones. ii) The collision of piston and head cover could acqure to the research, if the kinetic energy is more than compressible iii) If the load increase to the rolling car, the cushion region pressures would increase and the dynamic force.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.5 no.2
• /
• pp.14-19
• /
• 2008

Hydraulic excavator consists of booms, arms, bucket, and cylinder. The cylinder make these structures moved and the cushion parts of cylinder in operation absorb the great impact which is stemmed from high velocity and pressure at cushion parts of cylinders. The cushion technology of cylinders has a great effect on the operator's comfortable as well as protecting equipment from damage by suppressing the inertia of the hydraulic excavator. In this study, three hydraulic cylinders have different shapes of a cushion ring, respectively. we studied optimal cushion pattern by analyzing the change of cushion pressure and time, according to supply pressure and velocity variations.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.6
• /
• pp.794-805
• /
• 1999

Pneumatic cushioning cylinders are commonly employed for vibration and shock control. A mathematical simulation model of a double acting pneumatic cushioning cylinder designed to absorb shock loads is presented which is based on the following assumptions; ideal equation of state isentropic flow through a port conservation of mass polytropic thermodynamics single degree of freedom piston dynamics and energy equivalent linear damping. These differential equation can be solved through numerical integration using the fourth order Runge-Kutta method. An experimental study was conducted to validate the results obtained by the numerical integra-tion technique. Simulated results show good agreement with experimental data. The computer simulation model presented here has been extremely useful not only in understanding the has been extremely useful not only in understanding the basic cushioning but also in evaluating different designs.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.05a
• /
• pp.323-326
• /
• 2002

본 연구는 새로 개발된 에어쿠션의자의 인체 적합성 검증에 관한 실험으로 기존 에어쿠션의자와 스펀지 매트의자를 새로 개발된 의자와 비교 평가 하였다. 본 연구를 위해 설문지를 통한 사용자의 감성 및 사용성을 측정하였고 객관적 검증에 필요한 체압분포측정을 하였다. 실험의 결과 사용성 평가에서 대부분의 피험자들이 신형 의자가 보다 편안하고 안락하다고 응답하였으며, 각 의자를 비교하는 전체 14항목의 설문 중 11개 항목이 의자A에서 중요도 순위가 좋게 나타났다. 체압분포에서도 좌판의 경우 신형 에어쿠션의자의 체압의 평균값이 적게 나오면서 고르게 분포하였고, 좌골결절을 중심으로 좌, 우 대칭이 되게 나왔다. 또한 등판부위에서도 등판의 수직선을 중심으로 체압분포가 좌, 우 대칭이 되게 나왔다.

• Journal of the Korean Institute of Gas
• /
• v.17 no.2
• /
• pp.9-20
• /
• 2013

Depleted gas reservoir has been already explored and its geologic data, along with its reservoir properties, are already known through seismic exploration and drilling. Therefore it would be less difficult to develope a gas storage from depleted gas reservoir. Cushion gas which remains in the reservoir to maintain pressure affects withdrawal rate of working gas in underground gas storage. In this study, we attempted to investigate the relationship between cushion gas and withdrawal rate using a commercial simulator. From the analyses of the results, it is found that the minimum limit for a cycle of 5-month injection and 5-month withdrawal is 10 wells with 50% cushion gas, and 12 wells with 60% cushion gas for a cycle of 7-month injection and 3-month withdrawal.

• Journal of Digital Convergence
• /
• v.17 no.1
• /
• pp.423-432
• /
• 2019

The purpose of this study was to investigate the effect of cushion insole on lumbar flexibility and motor fitness in patients with lumbar spinal stenosis. 26 patients with lumbar spinal stenosis were randomly assigned to the experimental group 13 and the control group 13. Volunteers were allowed to wear cushioned insoles for two hours a day for six weeks. The experimental group was 8 mm and the control group was 4 mm, wearing a cushion insole as a blinded experiment. There was a significant increase(p<0.05) in the flexion test of the experimental group ($3.38{\pm}3.12$), but not statistically significant in the other tests(p>0.05). In conclusion, cushion insole was not suitable for intervention for lumbar spinal stenosis. There is a need to study the height and material of the insoles in the future.