• Journal of Biosystems Engineering
• /
• v.14 no.2
• /
• pp.85-93
• /
• 1989

This study was intended to develop the system which controls header height of combine automatically by means of sensing the difference between the header and the ground surface. A micro-computer was used for the controller. The sensing unit designed for the study was composed of potentiometer, oscillating link, and gage wheel. An electric-hydraulic circuit was driven by microcomputer to control header height of combine. Performance of the control system was tested by computer simulation, stationary operation of header, and traveling on the simulated ground.

• Journal of Biosystems Engineering
• /
• v.14 no.2
• /
• pp.94-103
• /
• 1989

This study was intended to develop the automatic feeding depth control system of the head-feed combine which could feed the rice head into threshing unit at the optimal depth regardless of plant height and uneven ground surface. In the control system, one-board microcomputer was used for the controller instead of conventional electric circuits. Field test of the combine equipped with the control system was conducted to evaluate its overall performance. It was also investigated how the location and time delay of rice head sensor affect the system performance.

• Journal of Biosystems Engineering
• /
• v.28 no.6
• /
• pp.491-496
• /
• 2003

This study was performed to develop an automatic sacking device for the combine harvester which was constituted input/output signal system, controller, delivery device, shooting device, pneumatic system for shooting operation, vibration device fer sacking operation and a new developed sacking bag. A new developed automatic sacking device and new sacking bag were operated well in general. And they were possible to develop a new combine to reduce of fatigue, to improve the safety and the performance. In developed device, The optimum delivery velocity of conveyer for sacking was 5.16 mm/sec. In sacking device, sacking discharge was shown 94％ with non-vibration condition and sacking discharge was shown 99％ with vibration condition, respectively.

• Journal of Biosystems Engineering
• /
• v.26 no.4
• /
• pp.363-370
• /
• 2001

This study intended to estimate the willingness-to-pay amount by farmers for the automatic guidance technology of Combine. Contingent Valuation Method was employed for this estimation using survey data from 65 Combine using farmers. Based on the dichotomous choice model, farmers’willingness-to-pay for the automatic guidance technology was ranged from ￦4,772,000(median) to ￦5,268,000(mean). The estimated willingness-to-pay by the for the new technology was approximately one quarter of the average value based on the willingness-to-pay for the new technology was approximately one quarter of the average value of Combine in sample farms. This implies that there is an economic rationals for developing the new technology as long as it will be available with the cost less than the amount of estimated willingness-to-pay.

• Journal of Biosystems Engineering
• /
• v.16 no.1
• /
• pp.18-26
• /
• 1991

This study was undertaken to investigate the ratio and compositions of tailings of the tailings return unit in the commercially available head-feed combines. The ratio of the returned tailings to the sum of the threshed grain and the returned tailings was 2.3~7.2% for various varieties of rice and operational conditions of combines tested and increased as the feeding rate and the cleaning air volume increased. The analysis of the returned tailings showed that the composition of rubbish and short straw was decreased as the feeding rate and the cleaning air volume increased.

• Journal of Biosystems Engineering
• /
• v.19 no.3
• /
• pp.175-184
• /
• 1994

This study was conducted to investigate experimentally the basic characteristics of the torque of the cutterbar driving shaft as the double-knife was used instead of the conventional standard single-knife type. A new design for inclined setting of the cutterbar relative to the direction perpendicular to combine harvester movement was investigated to test a possible reduction of concentrated load caused by the simultaneous cutting of many rows. It was evaluated that the maximum torque and mean total power of the driving shaft due to the cutting resistance of the rice straw were largely depended upon the rotational shaft-speed and straw feeding rate, but were resepectively 1.1~2.3 and 1.15~1.34 times higher compared to those while idling. It was also proved that the inclined setting of the cutterbar could save a considerable amount of energy required for its driving shaft.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.6
• /
• pp.39-45
• /
• 2011

Due to the introduction of the electronic control systems, agricultural machine is getting complicated with its special function. The complex electronics system increases difficulty of maintenances in the wiring harness system. The heavy wiring harness has some poor reliability and workability in the production line of manufacture also. So, in this study, some small local control modules are developed to complement the difficulties with the benefits of distributed control system. All of the local control modules are connected by using CAN communication. This system developed this study has the advantages of modification or alteration of wiring and local modules. All the sensors and actuators can be easily monitored and controlled by the main controller with the appropriate communication protocol made by in this study.

• Journal of Biosystems Engineering
• /
• v.17 no.2
• /
• pp.171-176
• /
• 1992

This study was intended to develop the design theory of the threshing unit of a head-feeding rice combine. It may be applied for various combining capacities with different cutting widths and forward speeds. Design factors in the theoretical development are : (1) dimensions of the threshing drum, (2) tooth approching angle, (3) distance between the adjacent teeth on their spiral setting line, (4) number of spirals, and (5) total number of teeth on the drum. A computer simulation program was developed to predict the proper dimensions for the threshing drum and tooth arrangement. A simulation for the prospective combine with varied capacities was also demonstrated. The parameters analyzed in the developed design theory were shown to be consistent with those of existing combines.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2001.02a
• /
• pp.413-419
• /
• 2001

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1998.06b
• /
• pp.53-59
• /
• 1998