• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.821-824
• /
• 1999

콘크리트 케이슨 제작장(Casting Bed)내에 케이슨의 제작 및 이동경로가 되는 이동통로(Trough)를 형성하고 거푸집과 이동통로를 겸할 수 있도록 고안한 소핏폼(Soffit Form)을 설치함으로써, 제작된 케이슨 하부로 케이슨 부양용 에어로 고(Aero Go)가 양방향으로 자유로이 이동할수 있게 하여 제작에서 운반까지의 각 단계별 공정이 일직선상에서 공장식 연속 조립공정으로 진행되며, 또한 별도의 대차 및 회수시설이 불필요한 공장형 일관 제작 시스템에 의한 다단계 케이슨 제작, 운반 및 진수방법이다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.27-32
• /
• 1999

This study was performed to evaluate properties of recycled concrete for roadway pavement. Recycled concretes was manufactured for the target compressive strength of 280kg/$\textrm{cm}^2$ and 180kg/$\textrm{cm}^2$ with recycled aggregate ratio of 0%, 20%, 40%, 60%, 80%, respectively. Laboratory experiment was conducted for testing properties of fresh concrete and concrete strength at curing 28days and durability by freezing and thawing treatment. The study result presented a maximum replacement ratio of recycled material.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.293-294
• /
• 2009

The purpose of this study is to propose the new equations for the compressive strength of existing concrete hydraulic structures by ultrasonic pulse velocity test.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.17-18
• /
• 2009

This research defined slip function using cracking behavior, bond characteristics and numerical analysis of cracking stabilized reinforced concrete member, and proposed a bond stres-slip model.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.97-98
• /
• 2009

In this study, tensile and shear test method for post-installed mechanical anchors embedded in concrete was proposed and the verification test was carried out to evaluate the design strength of anchor.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.379-382
• /
• 2000

In this paper, we evaluated the suitability of converter slag as concrete aggregate by measuring physical and chemical characteristics of converter slag. The converter slag mainly contains SiO₂and CaO as the chemical composition. The reaction with water and a little of free CaO in the slag causes slag's volume to expanse. Therefore, we used several aging method in order to decrease the characteristics of slag volume expansion. Then the compressive strength of concrete with the converter slag aggregate is measured.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.04a
• /
• pp.48-51
• /
• 1996

Recently, frost damage of storage tank for admixture agent caused by low temperature in winter and quality deterioration of admixture agent ofen happened. But, many problems are caused because of no applicable regulations of admixture agent facility and so on. Therefore, this study presents the reference data about using and quality control of admixture agent in practice and the judgement data about working out a counter plan of suitable heat insulation of injecion equipment of admixture agent exposed at outside in winter by measuring the freezing point of admixture agent for concrete.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.04a
• /
• pp.65-68
• /
• 1996

As a fundamental study on the quality control according to the freezing of admixture agent for concrete, this study instends to investigate the variation of quality of admixture according to the freezing by analyzing flow, unit weight, and compressive, tensil, flexural strength of cement mortar using admixture agent before and after freezing.

• Computational Structural Engineering
• /
• v.11 no.1
• /
• pp.113-118
• /
• 1998

CERVENKA CONSULTING의 설립자인 Vladimir Cervenka는 1970년 미국 Colorado 대학에서 콘크리트 크랙(Concrete Crack)과 관련하여 개발되어지던 유한요소해석 프로그램을 박사학위 취득 후 체코의 Czech Technical University와 Stuttgart University에서 계속 공동 개발이 되었다. 1990년에 CERVENKA CONSULTING이라는 회사가 설립이 되었고 그 후 "SBETA"라는 콘크리트 구조의 균열(Crack), 파괴(Fracture Mechanics) 등의 비선형모델(Nonlinear Material Model)의 유한요소해석(Finite Element Analysis) 프로그램을 상용화 출시하여 그동안 여러번 version-up이 되면서 현재는 두 대학의 교수, Jana Margoldova와 Radomir Pukl가 개발에 참여하여 최근에는 SBETA 2.0이 세계 여러 나라에서 사용이 되고 있는 콘크리트 구조의 크랙 해석용 프로그램이다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.10a
• /
• pp.140-147
• /
• 1996

This study was performed to investigate the characteristics of workability and strength of the concrete containing admixtures such as silica fume, fly ash, blast furnace slag, and rice husk ash. For this purpose, the workability and the strength of the concrete containing each admixture were tested and analyzed according to the unit weight of binder and the replacement ratio of each admixture.