• Journal of the Korean Ceramic Society
• /
• v.50 no.5
• /
• pp.319-325
• /
• 2013

In this study, petroleum cokes ash and $C_{12}A_7$-based slag were used for the shrinkage reduction and strength enhancement of mortar. The hydration properties of shrinkage reduction agents were analysed. The flow, change of length and compressive strength were experimented with mortar-added shrinkage reduction agents. As a result of this study, petroleum cokes ash : $C_{12}A_7$-based slag = 60~80% : 20~40% showed excellent results. In the case of mortar with 20% $C_{12}A_7$-based slag, the setting time and change of length were similar to Ref. mortar. The flow and compressive strength were superior to Ref. mortar. In the case of mortar with a 40% $C_{12}A_7$-based slag, the setting time was longer than Ref. mortar. The compressive strength of 3 days and 7 days were superior to Ref. mortar.

• Resources Recycling
• /
• v.31 no.1
• /
• pp.3-11
• /
• 2022

Silicon is the most abundant metal element in the Earth's crust. Metallurgical-grade silicon (MG-Si) is an important metal that has wide industrial applications, such as a deoxidizer in the steelmaking industry, alloying elements in the aluminum industry, the preparation of organosilanes, and the production of electronic-grade silicon, which is used in the electronics industry as well as solar cells. MG-Si is produced industrially by the reduction smelting of silicon dioxide with carbon in the form of coal, coke, or wood chips in electric arc furnaces. MG-Si is purified by chemical treatments, such as the Siemens process. Most single-crystal silicon is produced using the Czochralski method. These smelting and refining methods will be helpful for the development of new recycling processes using secondary silicon resources.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_3
• /
• pp.1247-1260
• /
• 2022

The steel industry accounts for about 5% of the total annual global energy consumption and more than 6% of the total anthropogenic carbon dioxide emissions. Therefore, there is a need to increase energy efficiency and reduce greenhouse gas emissions in these industries. The utilization of coke oven gas, a byproduct of the coke plant, is one of the main ways to achieve this goal. Coke oven gas used as a fuel in many steelmaking process is a hydrogen-rich gas with high energy potential, but it is commonly used as a heat source and is even released directly into the air after combustion reactions. In order to solve such resource waste and energy inefficiency, several alternatives have recently been proposed, such as separating and refining hydrogen directly from coke oven gas or converting it to syngas. Therefore, in this study, recent research trends on the separation and purification of hydrogen from coke oven gas and the production of syngas were introduced.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.2
• /
• pp.115-123
• /
• 2007

For investigating self-diagnosis applicability, a method based on monitoring the changes in the electrical resistance of carbon fiber reinforced concrete has been tested. Then after examining change in the value of electrical resistance at each flexural weight-stage of carbon fiber in CFGFRP (carbon fiber and glass fiber reinforcing plastic) with new type rib and carbon sheet for concrete reinforcing, the correlations of electrical resistance and load as a function of strain, deflection were analyzed. As the results, it is clarified that when carbon fiber rod, rib and sheet fracture, the electrical resistance of it increase largely, and specially in case of CFGFRP, afterwards glass fiber tows can be resist the load due to the presence of the hybrid (carbon and glass) reinforced fiber. Therefore, it can be recognized that reinforcing bar and new type rib of CFGFRP and sheet of CF could be applied for self-diagnosis of fracture in reinforced FRP concrete.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.3 no.1
• /
• pp.37-53
• /
• 1993

The polynuclear hydrocarbons (PAHs) emitted from coke oven standpipe were sampled using three sampling systems, including glass fiber filter+silver membrane filter, glass fiber filter+silver membrane filter+XAD-2 adsorbent tube, PTFE membrane filter+XAD-2 adsorbent tube, extracted by methylene chloride and analysed by gas chromathography using flame ionization detector. The results of this study were as follows. 1. Because the amounts of coke oven emissions(COE) were large, the analyses of PAHs were simple and possible without evaporation and concentration. Although the generation of COE was high during early stage of coking, the airborne concentration of PAHs was low and increased during late coking. 2. The contents of PAHs in COE were 1.35-2.81%. 3. The index components of PAHs were fluoranthene and pyrene. Their correlation coefficient to total PAHs were 0.96, 0.95, respectively. 4. The particulate PAHs were sampled by filter and gaseous PAHs by adsorbent tube. The collection efficiency of glass fiber filter+silver membrane filter was 20% of total amount sampled by filters+adsorbent and PTFE membrane filter 50%. Adsorbent tube must be attached to the filter to collect light and small PAH components. 5. The generation of acenaphthene and indeno (1,2,3-cd) pyrene were low and concentrations of fluorene and anthracene were $20-40ug/m^3$ throughout coking time. Other PAH eoncentrations were sometimes high. The generation of PAHs was low at 4-6 hours of coking time. The gaseous PAHs were generated earlier than particulate PAHs.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.6
• /
• pp.449-453
• /
• 2009

This study focused on the content characteristics of regulated hazardous substances in specific wastes. Regulated heavy metal such as Cu, Pb, Cd analyzed the 108 waste samples that it choice from the representative facilities. Analytical method used content test method, suggested on the basis of analytical method of developing country, and the results as compared with limited standard in Austria Petroleum, primary metalworking and electronic industry had high content of Cu more than 100 mg/kg of Austria limited standard. Pb detected high level concentration the sample that dust producted at Primary metalworking industry. In case of total Cr was show that high content at KSIC 18, 19, 23 etc but result analyzed Cr(VI), it was shown that high level at dust producted from sewing clothes and fur industry.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.2
• /
• pp.20-23
• /
• 2012

본 연구는 유기성폐기물을 처리하고 그것을 이용하여 고체연료 또는 퇴비를 생산하는 종합시스템에 관한 것이다. 유기성폐기물은 90% 전후의 높은 함수율을 나타내고 있기 때문에 처리에 중점을 두어야 할 부분이 수분 처리 방법이다. 따라서 기존의 처리방법으로는 고액분리하여 처리 후 하천에 방류하는 시스템에 의해 처리되고 있다. 하지만 본 연구에서는 기술개발의 차별화 및 선행기술의 회피 전략을 위해, 유기성폐기물의 수분을 건조시키는 방법으로 미생물이 유기성폐기물의 유기물을 분해하여 발생 되는 $80^{\circ}C$ 이상의 열에너지에 의해 수분을 제거하는 발열반응을 적용하여 수분을 제거하는 무방류시스 템이다. 뿐만 아니라 고체연료의 발열량을 높이기 위해서 무연탄, 코크스, 기름 등의 열량보조제를 첨 가하는 대신에 유기성폐기물을 첨가 한 후 적당한 발열반응 및 건조시켜 고체연료를 제조하는 방법으 로 4,000kcal/kg 이상의 높은 발열량을 얻을 수 있으며 불완전연소 등에 의한 2차 오염을 방지할 수 있는 기술이다. 따라서 친환경 미생물 발열반응에 의해 유기성폐기물을 저렴한 비용으로 액상 및 고상 을 동시에 처리 할 수 있으며, 고체연료를 제조할 수 있는 새로운 신기술이다.

• Resources Recycling
• /
• v.14 no.4 s.66
• /
• pp.17-21
• /
• 2005

Deep-sea Manganese nodules was treated with reduction-smelting process with adding the spent Ni-Cd battery or the cobalt contained spent catalyst for recovery of nickel and cobalt metals. The nickel in the spent Ni-Cd battery could be recovered by adding $5\%$ coke as a reducing agent regardless of the amount of battery added. However, to recover cobalt from the spent catalyst, it is require to add more coke for reduction of cobalt oxide in the catalyst. The treatment of metal wastes with manganese nodules can contribute to lower the cost for the processing of nodules and to facilitate the recycling of metal wastes.

• Applied Chemistry for Engineering
• /
• v.18 no.4
• /
• pp.381-385
• /
• 2007

High density activated carbons electrode materials, for supercapacitor were prepared by chemical KOH activation of cokes as the starting material under Ar atmosphere. By controlling the synthesis conditions and reducing KOH quantity in the activation step, the specific surface area of the product was decreased. BET surface area was measured to be $500{\sim}1260m^2/g$, and the electrode density was in the range of $0.68{\sim}0.83g/cm^3$. Volumetric specific capacitance (unit cell test) was as high as 20 F/cc, which corresponds to gravimetric specific capacitance of about 95 F/cc on the basis of half cell test. It should be noted that the specific capacitance of the activated carbons prepared in this study is superior to that of commercial activated carbons.

• Clean Technology
• /
• v.8 no.1
• /
• pp.11-17
• /
• 2002

Petcokes is the final product obtained from a refinery process. This petcokes includes high percentage of inorganic and sulfur compounds. Currently, the petcokes produced from domestic refinery plants include more than 6% of sulfur. To use petcokes as valuable raw materials, the weight percentage of sulfur must be lower than 2% of sulfur. Solvent extraction, thermal desulfurization, and hydro-desulfurization have been used to remove the sulfur. In this study, we attempted new approach to remove the sulfur introducing microwave energy. Microwave increase the reaction rates by providing the fast heating and disconnecting the bonding structure of the molecules. The experiments of microwave thermal desulfurization and microwave plus hydrogen gas were carried out to remove the sulfur. We obtained 68.3% of sulfur removal rate with the 2 hours of reaction time and 1835 W of microwave powder. In the experiment of microwave with hydrogen gas, we obtained 86.4% of sulfur removal rate with the 1.5 hours of reaction time and 1835 W of microwave power. If we increase reaction time or decrease the particle size of petcokes, we expect more than 90% of sulfur removal.