• Title/Summary/Keyword: 코라

Search Result 2,745, Processing Time 0.03 seconds

A Design of Correlator with the PBS Architecture in Binary CDMA System (Binary CDMA 시스템에서 PBS 구조를 가지는 코릴레이터 설계)

  • Lee, Seon-Keun;Jeong, Woo-Yeol
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.3 no.3
    • /
    • pp.177-182
    • /
    • 2008
  • Because output of multi-code CDMA system adapted high speed data transmission becoming multi-level system use linear amplifier in output stage and complex output signal. Therefore, Multi-Code CDMA system has shortcoming of high price, high complexity etc. Binary CDMA technology that allow fetters in existing CDMA technology to supplement this shortcoming proposed. In binary CDMA system When correlator process high speed data, bottle-neck phenomenon is happened on synchronization acquisition process, it is very important parameter. Because existent correlator must there be advantage that power consumption is small but flow addition of several stages to receive correlation's value, the processing speed has disadvantage because the operation amount is much. Therefore in this paper, proposed correlator has characteristic such as data is able to high speed processing, chip area is independent and power consumption is constant in structure in binary CDMA system.

  • PDF

Conservation of the Ancient Greek Bronze Helmet donated by Sohn Keechung (손기정 기증 고대 그리스 청동제투구의 보존처리)

  • Park, Haksoo;Jeong, Subin
    • Conservation Science in Museum
    • /
    • v.14
    • /
    • pp.69-79
    • /
    • 2013
  • The area of conservation treatment of the bronze helmet of the ancient Greece, treasure No. 904, which Sohn Keechung (1912 to 2002) received as an extra prize for his winning the marathon in the 1936 Berlin Olympics deteriorated and as a result crack and discoloration occurred. Its nose guard hung downward due to the crack of the bonded area of upper end. Therefore, conservation treatment of the helmet was conducted again. The nose guard was separated from the body. Stabilization and consolidation treatment of them was made and then they were joined again. The cracked and missing areas were reinforced with woven glass fibers, and the nose guard was reinforced with woven glass fibers and Ti plate after the bonding. The joined area of the nose guard was carved with the same pattern as that of the surrounding area and its color was adjusted to be the same as well.

Design of Rotating Moving-Magnet-Type VCM Actuator for Miniaturized Mobile Robot (소형 이동 로봇을 위한 회전형 보이스 코일 구동기 개발)

  • Shin, Bu Hyun;Lee, Seung-Yop;Lee, Kyung-Min;Oh, Dongho
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.37 no.12
    • /
    • pp.1529-1534
    • /
    • 2013
  • A voice coil actuator with a rotating moving magnet has been developed for a miniaturized mobile robot. The actuator has simple structure comprising a magnet, a coil, and a yoke. Actuator performance is predicted using a linearized theoretical model, and dynamic performance based on the air-gap between the magnet and the coil is predicted using motor constant and restoring constant obtained through finite element simulations. The theoretical model was verified using a prototype with 60 Hz resonance and 80 Hz bandwidth. We found that an input of 1.5 V can make the actuator rotate by $20^{\circ}$ statically. The driving configuration of the proposed actuator can be simplified because of its implementation of open-loop control.

Lens Position Error Compensated Fast Auto-focus Algorithm in Mobile Phone Camera Using VCM (VCM을 이용한 휴대폰 카메라에서의 렌즈 위치 오차 보상 고속 자동 초점 알고리즘)

  • Han Chan-Ho;Kim Tae-Kyu;Kwon Seong-Geun
    • Journal of Korea Multimedia Society
    • /
    • v.9 no.5
    • /
    • pp.585-594
    • /
    • 2006
  • Due to the size limit, the voice coil motor (VCM) is adopted in most of the mobile phone camera to control auto-focus instead of step motor. The optical system using the VCM has the property that the focus values are varying even though the same current is induced. It means that an error of the lens position was taken placed due to the characteristics of the VCM. In this paper, a algorithm was proposed to compensate the lens position error using the step size and the search count of each stage. In the proposed algorithm -7 step middle searching stage is inserted the conventional searching algorithm for the fast auto-focus searching and the final searing step size was set to +1 for the precise focus control, respectively. In the experimental results, the focus values was found more fast in the proposed algorithm than the conventional. And more the image quality by the proposed algorithm was superior to that of the conventional.

  • PDF

Syngas Production Based on Co-electrolysis of CO2 and H2O in Solid Oxide Electrolysis Cell (고체 산화물 CO2-H2O 공전해 기반 합성가스 생산 기술 )

  • NAMGI JEON;SANGHYEOK LEE;SANGKUK KIM;CHIKYU AHN;JIN SOO AHN
    • Transactions of the Korean hydrogen and new energy society
    • /
    • v.35 no.2
    • /
    • pp.140-145
    • /
    • 2024
  • High temperature co-electrolysis of H2O-CO2 mixtures using solid oxide cells has attracted attention as promising CO2 utilization technology for production of syngas (H2/CO), feedstock for E-fuel synthesis. For direct supply to E-fuel production such as hydrocarbon and methanol, the outlet gas ratio (H2/CO/CO2) of co-electrolysis should be controlled. In this work, current voltage characteristic test and product gas analysis were carried out under various reaction conditions which could attain proper syngas ratio.

A Study on Reverse-water Gas Shift Reaction in Solid Oxide Water Electrolysis Cell-stack for CO2 Reduction (CO2 저감을 위한 고체산화물 수전해 스택의 역수성가스 전환 반응 고찰)

  • SANGKUK KIM;NAMGI JEON;SANGHYEOK LEE;CHIKYU AHN;JIN SOO AHN
    • Transactions of the Korean hydrogen and new energy society
    • /
    • v.35 no.2
    • /
    • pp.162-167
    • /
    • 2024
  • Fossil fuels have been main energy source to people. However, enormous amount of CO2 was emitted over the world , resulting in global climate crisis today. Recently, solid oxide electrolyzer cell (SOEC) is getting attention as an effective way for producing H2, a clean energy resource for the future. Also, SOEC could be applicable to reverse water-gas shift reaction process due to its high-temperature operating condition. Here, SOEC system was utilized for both H2 production and CO2 reduction process, allowing product gas composition change by controlling operating conditions.

Analysis on the Communication Processes Appeared in Coteaching (코티칭에서 나타난 의사소통 과정 분석)

  • Yoon, Ji-Hyun;Noh, Tae-Hee;Han, Jae-Young
    • Journal of The Korean Association For Science Education
    • /
    • v.28 no.2
    • /
    • pp.159-168
    • /
    • 2008
  • The purpose of this study was to apply the coteaching to the teaching practice of the student-teachers and identify the distinctive characteristics of the communication processes appeared in coteaching. We developed the semiotic analyzing-frame and observed 7 classes of middle schools where the student-teachers cotaught one or two units. Then we analyzed the communication processes on the view of semiotics. We found three patterns of the communication processes. First, when there was a discontinuous communication between the student-teacher and the students, the communication was restarted by the other student-teacher leading to the complete meaning making. Second, when an insufficient communication took place by the student-teacher using inadequate interpretant, the other student-teacher modified the communication by selecting another interpretant including sufficient meaning towards the object. With this new interpretant, students could refine the imperfect private meanings and eventually establish the more objective meanings. Third, the communication was pre-planned between coteachers to help students understand the contents through the successful translation of interpretants. Coteaching provided positive implications to improve the communication processes in science lesson.

Experimental Study of Solenoid Actuator's Characteristics according to Coil Shapes (코일 형상에 따른 솔레노이드 액츄에이터 특성의 실험적 고찰)

  • Sung, Baek-Ju;Lee, Eun-Woong;Kim, Hyoung-Eui
    • Proceedings of the KIEE Conference
    • /
    • 2003.10b
    • /
    • pp.48-50
    • /
    • 2003
  • 개폐형(On/Off) 솔레노이드 액츄에이터의 설계에서는 온도상승을 고려한 권선수 산출이 가장 중요하고, 제작과정에서는 설계단계에서 산출된 권선수를 정확하게 정렬권선 형태로 구현해 내는 것이 가장 중요하다. 본 연구에서는, 비 정렬권선이 개폐식 솔레노이드 액츄에이터의 동작에 미치는 영향을 실험적으로 분석하였다. 실험은 하나의 정렬권선 코일과 비 정렬 상태가 다른 세권선을 사용하여 보빈과 연결된 요크가 있는 경우와 없는 경우를 각각 실험하고 그 때의 흡인력 온도상승 소비전력 등의 특성을 비교하였다. 특히, 온도상승 실험은 실제 사용시의 상황을 구현하기 위하여 권선상태가 다른 4종류의 코일 각각에 100만회의 내구성 시험을 실시하면서 작동횟수를 등분하여 코일, 요크, 몰딩부의 각 측정점 온도를 측정하였다.

  • PDF

Optimization for Degaussing Coil Currents Utilizing Coils established in Virtual Area and Magnetomotive Force Sensitivity (기자력 민감도와 가상영역 내에 구축된 코일을 이용한 소자 코일의 전류 최적화)

  • Choi, Nak-Sun;Jeung, Gi-Woo;Yang, Chang-Seob;Chung, Hyun-Ju;Kim, Dong-Hun
    • Proceedings of the KIEE Conference
    • /
    • 2011.07a
    • /
    • pp.1005-1006
    • /
    • 2011
  • 함정 내부에 설치된 소자 코일의 기하학적 정보를 알 수 없을 때에도 소자 코일 전류 최적화를 수행하고자 코일 효과와 기자력 민감도를 이용한 최적화 기법을 바탕으로 가상영역 내에 구축된 코일을 이용하는 소자 코일 전류 최적화를 수행하는 기법을 제시하였다. 민감도 특성을 기반으로 가상영역 내에 임의의 소자 코일을 구축하였으며 이에 따른 특성을 분석하였다. 그리고 정상 상태의 소자상태, 전류 최적화 결과를 비교함으로서 제안한 기법의 활용 가능성을 확인하였다.

  • PDF

Characteristics Analysis of Small AFPM Generator with Variation of Coil Winding Method (권선 방법에 따른 소형 축방향 자속 발전기 특성 해석)

  • Lee, Keon-Su;Lee, Kyu-Seok;Park, Jung-Hyung;Yang, Hee-Jung;Lee, Sung-Ho;Park, Sung-Jun
    • Proceedings of the KIEE Conference
    • /
    • 2011.07a
    • /
    • pp.1015-1016
    • /
    • 2011
  • 본 논문에서는 권선 방법에 따라 코일 U, V, W를 같은 층에 원주방향으로 배치한 집중권 권선 모델, 코일 U, V, W를 각각 한 층씩 원주 방향으로 배치한 분포권 권선 #1 모델, 코일에 경사각을 적용하여 코일 U, V, W를 한 층에 배치하는 분포권 #2 모델로 총 3가지 사양의 3상 코어리스 축방향 자속 발전기를 설계하였다. 3차원 유한요소 해석을 활용하여, 무부하 상태에서의 역기전력, 쇄교 자속 밀도와 외부 정류 회로를 구성한 부하 상태에서의 정류 전압, 정류 전류와 같은 전자기 특성에 대한 해석 및 특성 비교를 수행하였다.

  • PDF