• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.2
• /
• pp.163-168
• /
• 2018

In this paper, we propose and develop a test automation program tool that automates GUI based testing using black box testing technique in Windows environment. The main features of the proposed test automation program tool are as follows. First, an error condition is designated as an image, a screen is captured for each test step, and an error message is detected through comparison of image similarity. Second, the proposed system supports various setting options such as event waiting time during execution and coordinate increment value between each test step. Such black box test automation research was common in environments such as Android and Web, but not in Windows environment. The results of performance evaluation show that the proposed system performs GUI test automation as an image comparison module and confirms that the test is performed normally by confirming process status and error image detection.

• Journal of Fisheries and Marine Sciences Education
• /
• v.20 no.2
• /
• pp.184-200
• /
• 2008

The purpose of this paper is to develop instructional activity support model for capstone design in order for improving creative engineering education. To do this, having extracted the core idea of capstone design, and elicited core learning activity process, and grasped core supportive factors according to each core learning activity process that elicited, an improved instructional design model for capstone design was then developed through formative evaluation with respect to the draft of the instructional system development model for capstone design. As to major research methods, case analysis, requirements analysis through interview, and formative evaluation by experts were employed, and then research studies were undertaken. The formative evaluation by experts was carried out for two hours in 2007, and the experts participated in the evaluation consisted of total 6 persons: two specialists of capstone design contents, two professionals in field works, and two expert instructional designers in education engineering. Interview results had been reflected in this research when developing final instructional design model for capstone design. The core learning activity process of the final instructional design model for caption design, which developed in this research, comprises following stages: (1) Team building $\rightarrow$ (2) Integrated meeting between industry and academy $\rightarrow$ (3) Analysis of tasks $\rightarrow$ (4) Clarification of tasks $\rightarrow$(5) Seeking solutions for issues $\rightarrow$ (6) Eliciting priority of solutions $\rightarrow$ (7) Designing solutions and construction $\rightarrow$ (8) Exhibiting outcomes and presentation $\rightarrow$(9) Gaining comprehensive insights Also, in the core learning activity process, supportive factors that support implementation of each step were presented having been categorized into facilitator (teacher, and professionals in field works), learner and tool, etc.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.5
• /
• pp.921-928
• /
• 2014

This study investigated the quality characteristics of cookies containing capsaicin, the main source of spicy taste in pepper, which is well known for its various functions such as anti-oxidant, anti-cancer, anti-inflammatory, and anti-obesity activities, as well as pain-relief effect. Cookie samples were made by adding the capsaicin powder at different levels, including 40 mg% (C1), 85 mg% (C2), and 150 mg% (C3). In this study, measurement of the moisture, pH, color, spread factor, hardness, anti-oxidant activity, and sensory evaluation of the cookies was carried out. The results showed that the anti-oxidant activity increased when more capsaicin powder was added to the cookies (p<0.001). The moisture also increased with increasing capsaicin powder content (p<0.05), while the pH did not show any significant changes. As for the colors, the L value and b value decreased as more capsaicin powder was added, while the a value increased. The spread factor also increased significantly with the increase of capsaicin powder (p<0.01). Although the hardness increased with capsaicin powder content, no statistically significant differences were observed among the various cookies. In the sensory evaluation, Cookies containing 40 mg of capsaicin obtained the highest score in color, while cookies containing 150 mg of capsaicin showed the highest score in taste, texture, and overall acceptability.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.4
• /
• pp.31-39
• /
• 2008

To develop the MEMS cap bonding process without cavity formation, we electroplated Cu/Sn rim structures and measured the bonding characteristics for the Cu/Sn rims of $25{\sim}400{\mu}m$ width. As the effective device-mounting area ratio decreased and the failure strength ratio increased for wider Cu/Sn rim, these two properties were estimated to be optimized for the Cu/Sn rim with 150 ${\mu}m$ width. Complete bonding was accomplished at the whole interfaces of the Cu/Sn packages with the rim widths of 25 ${\mu}m$ and 50 ${\mu}m$. However, voids were observed locally at the interfaces with the rim widths larger than 100 ${\mu}m$. Such voids were formed by local non-contact between the upper and lower rims due to the surface roughness of the electroplated Sn.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.5
• /
• pp.49-54
• /
• 2009

This paper describes implementation of the 1.9GHz RF frequency synthesizer with $0.18{\mu}m$ silicon CMOS technology being used as an application of the USN sensor node transceiver modules. To get good performance of speed and noise, design of the each module like VCO, prescaler, 1/N divider, fractional divider with ${\Sigma }-{\Delta}$ modulator, and common circuits of the PLL has been optimized. Especially to get good performance of speed, power consumption, and wide tuning range, N-P MOS core structure has been used in design of the VCO. The chip area including pads for testing is $1.2{\times}0.7mm^2$, and the chip area only core for IP in SoC is $1.1{\times}0.4mm^2$. The test results show that there is no special spurs except -63.06dB of the 6MHz reference spurs in the PLL circuitry. There is good phase noise performance like -116.17dBc/Hz in 1MHz offset frequency.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.87-93
• /
• 2008

This paper describes implementation of the 5.0GHz RF frequency synthesizer with $0.18{\mu}m$ silicon CMOS technology being used as an application of the IEEE802.15.4 USN sensor node transceiver modules. To get good performance of speed and noise, design of the each module like VCO, prescaler, 1/N divider, fractional divider with ${\Sigma}-{\Delta}$ modulator, and common circuits of the PLL has been optimized. Especially to get good performance of speed, power consumption, and wide tuning range, N-P MOS core structure has been used in design of the VCO. The chip area including pads for testing is $1.1*0.7mm^2$, and the chip area only core for IP in SoC is $1.0*0.4mm^2$. Through comparing and analysing of the designed two kind of the frequency synthesizer, we can conclude that if we improve a litter characteristics there is no problem to use their as IPs.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.5
• /
• pp.69-73
• /
• 2009

In this study, three dimensional numerical analyses were performed with variation of pile spacing (S=3D, 4D, 5D) to compare the behaviour of single pile and pile group with cap in granite soil. In order to compare and analyze the lateral resistance of single pile and pile group by changing pile spacing, the pile group with array of $1{\times}3$ was employed. To reduce the computation time the symmetric boundary condition was used. And Druker-Prager model and elasticity model were used for granite soil and for concrete pile and cap, respectively. Using the analyses results of pile group in granite soil under lateral loading, p-y curve for pile group and single pile with changing pile spacing was drawn. With p-y curve p-multiplier was evaluated. As a result of analysis, the value of p-multiplier was increased with increasing pile spacing under 1.0 due to pile shadow effects.

• Journal of Korea Multimedia Society
• /
• v.10 no.3
• /
• pp.391-400
• /
• 2007

According to the recent advances in multimedia computing, storage and searching technology have made large volume of music contents become prevalent. Also there has been increasing needs for the study on efficient categorization and searching technique for music contents management. In this paper, a new classifying method using the local information of music content and music tone feature is proposed. While the conventional classifying algorithms are based on entire information of music content, the algorithm proposed in this paper focuses on only the specific local information, which can drastically reduce the computing time without losing classifying accuracy. In order to improve the classifying accuracy, it uses a new classification feature based on music tone. The proposed method has been implemented as a part of MuSE (Music Search/Classification Engine) which was installed on various systems including commercial PDAs and PCs.

• Journal of Practical Engineering Education
• /
• v.6 no.1
• /
• pp.23-29
• /
• 2014

In this study, there is a modeling for the procedure and operational method of the project based capstone design and related products which are a certificate of graduate qualification, and those results were evaluated by self-review and the performance assessment. Processing of research based on wireless searching robot is described according to the model. Before one semester by the end of to the assessment, the design thesis of capstone results was fixed to 18 groups with two people in each group. 13 teams out of 18 teams are satisfied the criteria of evaluation, and they all got a grade over 60 points and the other teams are not qualified at the first stage of final judgment. The total team mean average is 71.79. The research based on wireless searching robot was earned the highest average point among the other teams which is 96.1.

• Design & Manufacturing
• /
• v.13 no.4
• /
• pp.45-50
• /
• 2019

The fourth industrial revolution calls for an integrated talent by improving working-level skills within the big framework of creativity and convergence. Therefore, university education focuses on solving the problem of practical ability education by improving employment ability. Based on this improvement in practical skills, this study is based on the field-based design curriculum of Capstone. Currently, the Capstone Design Course is being implemented at most universities, extending its scope to the fields of engineering, humanities, social studies and arts. However, there is a limit to the core concept of Capstone design education and capacity education developed in line with the foreign educational environment and applied directly to our nation's university education. In terms of overseas cases, the core focus is to develop practical, design, and prototype capabilities by forming a team among all grades and multidisciplinary institutions to support the capital and manpower of the industry. However, the nation's industrial linkage and curriculum have difficulties in carrying out multi-disciplinary education. In this study, students were asked to team up and solve the challenges that the industry needs based on the expertise acquired in the lower grade curriculum by applying majors and 3D printing through the first and second semester courses of the fourth grade to address these limitations. In addition, business skills for the process of creativity and leadership experience in our country through a suitable design capstone class to review the efficiency of education by applying a model. In order to achieve the purpose of Capstone design subject, the goal setting, class model composition, class model application, verification and evaluation, and final class model development procedures were carried out. Through this process, it will be used as a basic material for educating design class capstone design.