• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.04a
• /
• pp.303-307
• /
• 2008

In this study, we have carried out the cone calorimeter test to examine the thermal characteristics, such as total smoke production(TSP), smoke temperature and oxygen consumption, of significant parts of above trees which are representative species of Young Dong Province of Korea. The smoke production of dead leaves and living leaves of pinus densiflora was increased rapidly at the early period of combustion. So the total smoke production of this parts was 8.3 times higher than other parts. The TSP of branches and barks of quercus dentata was 14.4 and 7.2 times higher than of pinus densiflora respectively. And also the maximum smoke temperature was about $338.35{\sim}353.25\;K$. The significant difference of oxygen consumption was not detected for dead leaves, branches and barks. However, the oxygen consumption of living leaves which have high percentage of moisture content is the lowest.

• Korean Journal of Food Science and Technology
• /
• v.27 no.2
• /
• pp.225-229
• /
• 1995

Soy oligosaccharide, a low calorie sugar, which is known to improve the intestinal microbial flora, was recovered from the waste of soymilk process by Steffen process. To remove protein contaminants, prior to the Steffen process, pH of the sample was adjusted to $3.5{\sim}4.0$ or calcium chloride was added 8%(w/w) per sugar. Both pretreatment processes were found to remove about $25{\sim}30%$ of the protein initially present in the sample. Using the Steffen process, as much as 85% of soy oligosaccharide could be recovered as a saccharate form. The amounts of calcium chloride and lime used were 20%(w/w) and $100{\sim}120%$(w/w) per total sugar, respectively. After the sugar was desorbed by $CO_{2}$, the final yield of oligosaccharide was 80% while 80% of protein were removed from the original solution. The composition of sugar was similar to that of soybean cooking water.

• Fire Science and Engineering
• /
• v.29 no.6
• /
• pp.13-19
• /
• 2015

This study was performed to test the combustive properties of Pinus rigida specimens treated with phosphorus (P) and nitrogen (N) additives. Each Pinus rigida specimen was painted three times with 15 wt% P-N additive solutions at room temperature. After drying the treated specimens, the combustion properties were examined using a cone calorimeter (ISO 5660-1). The time to ignition (TTI) for the treated specimens was 90 to 148 s except for the specimen treated with PP/$4NH_4^+$, and the time to flameout (TF) was 556 to 633 s, which was longer than that of virgin plate. While the The specimens treated with P-N additives showed 12.5 to 43.4% higher mean heat release rate ($HRR_{mean}$) and 11.8 to 43.1% higher total heat release (THR) than virgin plate. The effective heat of combustion (EHC) was by 2.9 to 17.5% lower than that of virgin plate. It can thus be concluded that the combustion-retardation properties were partially improved compared to those of virgin plate.

• Fire Science and Engineering
• /
• v.22 no.1
• /
• pp.84-92
• /
• 2008

Disclosed is a study related to the thermal characteristics of Pinus densiflora and Quercus dentate identifying the presence of any significant difference in the above trees, which are native to Young Dong Province of Korea, according to different regions of the trees such as branches, barks, living leaves and dead leaves. For this purpose, we have carried out a cone calorimeter test focusing on the variables such as mass loss, heat release, ignition time, flame holding time and concentrations of CO and $CO_2$. The results showed that the total mass loss was greatest in tree branches, whereas the ignition time of dead leaves was fastest both in Pinus densiflora and Quercus dantata. The flame holding times of dead leaves and barks were about $640{\sim}1,016s$ and the total heat release of dead leaves was around 60.1 $MJ/m^2$, twice the total heat release of living leaves. In addition, the maximum exhaust concentrations of CO and $CO_2$ in tree branches of Quercus dentata was 2.82 times higher than those of Pinus densiflora, respectively. From the foregoing, it was confirmed that there exist region-specific differential thermal characteristics in Pinus densiflora and Quercus dentata.

• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.2
• /
• pp.215-221
• /
• 2004

To determine the effects of caloric restriction on obese type 2 diabetes we measured body blood glucose and serum lipid level in dietary restricted Otsuka Long Evans Tokushima Fatty (OLETF) rats. OLETF rats (obese diabetic rats) and Long Evans Tokushima Otsuka (LETO) rats (control rats) were grouped into 2 groups; control (free feed) group and 30% caloric restricted (30% CR) group. At 24 weeks of age the 30% CR animals were provided a diet at a level of 30% less food (by weight) than control rats consumed during the previous week. Blood glucose levels and serum triglyceride, total cholesterol, and high density lipoprotein (HDL)-cholesterol levels of CR rats were determined every 2 weeks for 8 weeks total. Blood glucose, triglyceride and total cholesterol levels of OLETF rats were significantly higher compared to LETO rats. In OLETF rats, the blood glucose levels were decreased to 61% by 8 weeks in the 30% CR compared to the non-CR control group, but changes of blood glucose levels were not observed in LETO rats during the 8weeks in the 30% CR. The serum triglyceride levels of OLETF rats were decreased significantly in the 30% CR but no change in the serum of LETO rats was found. The total cholesterol level was not changed by dietary restriction in LETO rats, but significant changes were observed in OLETF rats by 30% dietary restriction. HDL-cholesterol levels were also increased by dietary restriction in both LETO and OLETF rats. These results suggested that elevated blood glucose, triglyceride and total cholesterol levels in diabetes II patients may be reduced by caloric restriction.

• Food Science of Animal Resources
• /
• v.22 no.4
• /
• pp.358-362
• /
• 2002

The physico-chemical, sensory and nutritional properties of water extract from bull's bones of Hanwoo, Holstein, and imported breed were investigated to provide scientific information for consumers. The turbidity, viscosity, lightness(L value) and sensory scores were highest for water extract from Hanwoo's bones among three breeds(p<0.05). Total nitrogen and calcium contents, and calories were higher for water extract from the bones of Hanwoo and Holstein than the imported one(p<0.05), but no differences in the water extract were observed between Hanwoo and Holstein. In amino acid compositions, the percentages of methionine were the highest for water extract from Hanwoo's bones. These results indicated that the water extract from the bones of Hanwoo had the most acceptable quality among three breeds.

• Applied Chemistry for Engineering
• /
• v.24 no.6
• /
• pp.633-638
• /
• 2013

This study was performed to test the combustive properties of pinus rigida specimens treated with bis-(dimethylaminomethyl) phosphinic acid, bis-(diethylaminomethyl) phosphinic acid (DEDAP), and bis-(dibuthylaminomethyl) phosphinic acid. Pinus rigida specimens were painted in three times with 15 wt% bis-(dialkylaminoalkyl) phosphinic acid solutions at the room temperature. After drying the treated specimens, combustive properties were examined by the cone calorimeter (ISO 5660-1). Combustion-retardation properties were found to be improved partially due to the treated bis-(dialkylaminoalkyl) phosphinic acids in the virgin pinus rigida. In particular, the specimens treated with DEDAP showed both the lower total heat release rate ($60.9MJ/m^2$) and effective heat of combustion (15.20 MJ/kg) than those of virgin plates. Compared with virgin pinus rigida plates, specimens treated with the bis-dialkylamimoalkyl phosphinic acid derivatives showed partially low combustive properties.

• Applied Chemistry for Engineering
• /
• v.24 no.6
• /
• pp.616-620
• /
• 2013

In this work, the combustive properties of the swine manure, poultry manure, and mixtures based on the resource recycling-energy were investigated. After the specimens were dried to a constant weight by dry oven, combustive properties were tested by the cone calorimeter (ISO 5660-1). It was found that the peak effective heat of combustion (PEHC) in the swine manure (78.72 MJ/kg) has risen due to more amount of the hydrocabon compared with poultry manure (69.41 MJ/kg), also the swine manure increased both of the higher $CO_2$ production rate (0.1959 g/s) and total smoke release rate (THRR) ($419m^2/m^2$) than those of the poultry manure. However, both of the CO production release (0.0996 kg/kg) and CO production rate (0034 g/s) in the poultry manure increased due to more amount of the inorganic contents compared with swine manure. Thus, the high combustion energy is expected to generate depend on the hydrocarbon content.

• Fire Science and Engineering
• /
• v.24 no.3
• /
• pp.86-92
• /
• 2010

One of the limitation of wood as building materials is its flammability. The purpose of this paper is to examine the combustion properties of the Pinus rigida and Castanea savita which are grown in Korea and meet the desirable characteristics for use of construction materials. The cone calorimeter (ISO 5660-1) was used to determine the heat release rate (HRR) and fire smoke index, as well as CO and $CO_2$ production and smoke obscuration. The $HRR_{mean}$ of the Castanea savita and Pinus rigida at $50\;kW/m^2$ of radiant heat flux was $70.4\;kW/m^2$ and $68.5\;kW/m^2$. Furthermore, the THR of Castanea sativata was 120.8 MJ/kg and it was higher than the THR of Pinus rigida ($81.9\;MJ/m^$). These results are depend on the bulk density of tested wood species. The Castanea savita has high $CO_{mean}$ yield and high CO/$CO_2$ yield compared with that of Pinus rigida.

• Fire Science and Engineering
• /
• v.24 no.2
• /
• pp.89-96
• /
• 2010

In this research, exterior material combustion experiment was really tested to evaluate fire risks of aluminium complex panel which is used a lot for building exterior material. As a result, We saw fast fire spreading of aluminium complex panel. The reason is polyethylene in aluminum complex panel combust spreading fast fire flame vertically. In this test, the highest heat release rate of aluminum complex panel was 1,144 kW and surface temperature which is measured by thermocouple went up to more than $903.3^{\circ}C$, that temperature is quite a higher than $660^{\circ}C$ which is aluminum melting temperature. So, fire of aluminum complex panel can be evaluated to give us severe damage both by fast fire spreading vertically and by fire spreading through openings internally. These results from real experiment will be able to use to predict fire spreading of aluminum complex panel by comparing to modeling materialization of aluminum complex panel in the future.