DOI QR코드

DOI QR Code

Combustion Characteristics of Pinus rigida Specimens Treated with Phosphorus-Nitrogen Additives

인-질소 첨가제로 처리된 리기다 소나무 시험편의 연소특성

  • Chung, Yeong-Jin (Dept. of Fire Protection Engineering, Kangwon National University Fire & Disaster Prevention Research Center, Kangwon National University)
  • 정영진 (강원대학교 소방방재공학과, 강원대학교 소방방재연구센터)
  • Received : 2015.07.31
  • Accepted : 2015.10.26
  • Published : 2015.12.31

Abstract

This study was performed to test the combustive properties of Pinus rigida specimens treated with phosphorus (P) and nitrogen (N) additives. Each Pinus rigida specimen was painted three times with 15 wt% P-N additive solutions at room temperature. After drying the treated specimens, the combustion properties were examined using a cone calorimeter (ISO 5660-1). The time to ignition (TTI) for the treated specimens was 90 to 148 s except for the specimen treated with PP/$4NH_4^+$, and the time to flameout (TF) was 556 to 633 s, which was longer than that of virgin plate. While the The specimens treated with P-N additives showed 12.5 to 43.4% higher mean heat release rate ($HRR_{mean}$) and 11.8 to 43.1% higher total heat release (THR) than virgin plate. The effective heat of combustion (EHC) was by 2.9 to 17.5% lower than that of virgin plate. It can thus be concluded that the combustion-retardation properties were partially improved compared to those of virgin plate.

이 연구에서는 인(P)-질소(N)의 첨가제로 처리된 리기다 소나무의 연소성을 시험하였다. 15 wt%의 인-질소 첨가제 수용액으로 리기다 소나무에 3회 붓칠하여 실온에서 건조시킨 후, 콘칼로리미터(ISO 5660-1)를 이용하여 연소성을 시험하였다. 그 결과, 인-질소 첨가제로 처리한 시험편은 피로인산/암모니움이온 첨가제로 처리한 시험편을 제외하고, 처리하지 않은 시험편에 비하여 착화시간이 90~148 s으로 길었다. 또 불꽃소멸시간은 556~633 s으로서 길게 측정되었다. 그러나 인-질소 첨가제로 처리한 시험편은 무처리 시험편에 비해 각각 12.5~43.4% 정도 높은 평균열방출률과 11.8~43.1% 정도 높은 총열방출률을 나타내었다. 특히, 인-질소 첨가제로 처리한 시험편의 유효연소열은 15.60~18.37MJ/kg으로서 순수 리기다 소나무 시험편에 비하여 2.9~17.5% 낮게 나타났다. 따라서 인-질소 첨가제로 처리한 시험편은 순수 리기다 소나무 시험편에 비하여 연소 억제성을 부분적으로 향상시켰다.

Keywords

References

  1. Y. J. Chung, "Comparison of Combustion Proprties of Native Wood Species Used for Fire Pots in Korea", J. Ind. Eng. Chem., Vol. 16, No. 1, pp. 15-19 (2010). https://doi.org/10.1016/j.jiec.2010.01.031
  2. P. W. Lee and J. H. Kwon, "Effects of the Treated Chemicals on Fire Retardancy of Fire Retardant Treated Particleboards", Mogjae-Gonghak, Vol. 11, No. 5, pp. 16-22 (1983).
  3. T. S. Mcknight, "The Hygroscopicity of Wood Treated with Fire-retarding Compounds", Fore. Prod. Res. Branch, Dep. of Forestry, Canada. Report No. 190 (1962).
  4. J. C. Middleton, S. M. Dragoner and F. T. Winters, Jr., "An Evaluation of Borates and other Inorganic Salts as Fire Retardants for Wood Products", Fore. Prod. J., Vol. 15, No. 12, pp. 463-467 (1965).
  5. I. S. Goldstein and W. A. Dreher, A. "Non-hygroscopic Fire Retardant Treatment for Wood", Froe. Prod. J., Vol. 11, No. 5, pp. 235-237 (1961).
  6. R. Kozlowski and M. Hewig, "1st Int Conf. Progress in Flame Retardancy and Flammability Testing", Institute of Natural Fibres, Pozman, Poland (1995).
  7. R. Stevens, S. E. Daan, R. Bezemer and A. Kranenbarg, "The Strucure-activity Relationship of Retardant Phosphorus Compounds in Wood", Polym. Degrad. Stab., Vol. 91, No. 4, pp. 832-841 (2006). https://doi.org/10.1016/j.polymdegradstab.2005.06.014
  8. Y. J. Chung, Y. H. Kim and S. B. Kim, "Flame Retardant Properties of Polyurethane Produced by the Addition of Phosphorous Containing Polyurethane Oligomers (II)", J. Ind. Chem. Eng., Vol. 15, No. 6, pp. 888-893 (2009). https://doi.org/10.1016/j.jiec.2009.09.018
  9. Y. J. Chung, "Flame Retardancy of Veneers Treated by Ammonium Salts", J. Korean Ind. Eng. Chem., Vol. 18, No. 3, pp. 251-255 (2007).
  10. M. L. Hardy, "Regulatory Status and Environmental Properties of Brominated Flame Retardants Undergoing Risk Assessment in the EU: DBDPO, OBDPO, PeBDPO and HBCD", Polym. Degrad. Stab., Vol. 64, No. 3, pp. 545-556 (1999). https://doi.org/10.1016/S0141-3910(98)00141-4
  11. Y. Tanaka, "Epoxy Resin Chemistry and Technology", Marcel Dekker, New York (1988).
  12. ISO 5660-1, "Reaction-to-Fire Tests-Heat Release, Smoke Production and Mass Loss Rate-Part 1: Heat Release Rate (Cone Calorimeter Method)", Genever (2002).
  13. V. Babrauskas, "New Technology to Reduce Fire Losses and Costs", eds. S. J. Grayson and D. A. Smith, Elsevier Appied Science Publisher, London, UK (1986).
  14. M. M. Hirschler, "Thermal Decomposition and Chemical Composition", 239, ACS Symposium Series 797 (2001).
  15. C. H. Lee, C. W. Lee, J. W. Kim, C. K. Suh and K. M. Kim, "Organic Phosphorus-nitrogen Compounds, Manufacturing Method and Compositions of Flame Retardants Containing Organic Phosphorus-nitrogen Compounds", Korean Patent 2011-0034978 (2011).
  16. O. Grexa, E. Horvathova, O. Besinova and P. Lehocky, "Falme Retardant Treated Plyood", Polym. Degrad. Stab., Vol. 64, Issue 3, pp. 529-533 (1999). https://doi.org/10.1016/S0141-3910(98)00152-9
  17. Cischem Com, Flame Retardants, Chischem. Com. CO., Ltd. (2009).
  18. Y. J. Chung and E. Jin, "Synthesis of Alkylenediaminoalkyl-Bis-Phosphonic Acid Derivatives", J. of Korean Oil Chemist's Soc., Vol. 30, No. 1, pp. 1-8 (2013). https://doi.org/10.12925/jkocs.2013.30.1.001
  19. Kosha, Chemical materials information, MSDS (2015).
  20. J. J. Choi, Y. J. Chung, S. K. Kim, D. I. Shin, B. Y. Lee, H. J. Park, et al., "Development of Technology for Eco- Friendly Flame Retardant Agent and Retardant Treatment", NEMA Next Generation 2010-011, National Emergency Management Agency (2013)
  21. W. T. Simpso, "Drying and Control of Moisture Content and Dimensional Changes, Chap. 12, 1, Wood Handbook- Wood as an Engineering Material", Forest Product Laboratory U.S.D.A., Forest Service Madison, Wisconsin, U.S.A. (1987).
  22. M. J. Spearpoint and G. J. Quintiere, "Predicting the Burning of Wood Using an Integral Model", Combustion and Flame, Combust. Flame, Vol. 123, No. 3, pp. 308-325 (2000). https://doi.org/10.1016/S0010-2180(00)00162-0
  23. F. M. Pearce, Y. P. Khanna and D. Raucher, "Thermal Analysis in Polymer Flammability, Chap. 8, Thermal Characterization of Polymeric Materials", Academic Press, New York, U.S.A. (1981).
  24. J. D. DeHaan, "Kirks's Fire Investigation", Fifth Edition, 84, Prentice Hall, New Jersey, U.S.A. (2002).
  25. V. Babrauskas, "Development of Cone Calorimeter-a Bench-scale Heat Release Rate Apparatus Based on Oxygen Consumption", Fire Mater., Vol. 8, No. 2, pp. 81-95 (1984). https://doi.org/10.1002/fam.810080206
  26. V. Babrauskas and S. J. Grayson, "Heat Release in Fires", 644, E & FN Spon (Chapman and Hall), London, UK (1992).
  27. V. Babrauskas, "Heat Release Rate, Section 3, The SFPE Handbook of Fire Protection Engineering", Fourth ed., National Fire Protection Association, Massatusetts, U.S.A. (2008).
  28. M. Hagen, J. Hereid, M. A. Delichtsios, J. Zhang and D. Bakirtzis, "Flammability Assesment of Fire-retarded Nordic Spruce Wood Using Thermogravimetric Analyses and Cone Calorimettry", Fire Safety J., Vol. 44, Issue 8, pp. 1053-1069 (2009). https://doi.org/10.1016/j.firesaf.2009.07.004
  29. M. J. Spearpoint and G. J. Quintiere, "Predicting the Burning of Wood Using an Integral Model", Combustion and Flame, Vol. 123, pp. 308-325 (2000). https://doi.org/10.1016/S0010-2180(00)00162-0
  30. M. H. Park and Y. J. Chung, "Combustive Properties of Pinus rigida Plates Painted with Alkylenediaminoalkyl-Bis-Phosphonic Acid Salts ($M^{n+}$)", Fire Sci. Eng., Vol. 28, No. 6, pp. 28-34 (2014). https://doi.org/10.7731/KIFSE.2014.28.6.028
  31. J. G. Quintire, "Principles of Fire Behavior", Chap. 5, Cengage Learning, Delmar, U.S.A. (1998).