• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2006.04a
• /
• pp.87-91
• /
• 2006

본 연구의 대상 지역은 전라북도 부안군 변산면 격포리 일대이다. 이 지역의 해안 대수층 내에서 발생하고 있는 해수 침투 현상을 효과적으로 모사하고 지하수 양수정의 설치 및 운영의 영향을 정량적으로 평가하기 위하여 지형과 지층의 구성 등의 수리지질학적 특성을 종합적으로 고려한 지하수 유동 및 염분 이동 삼차원 수치 모델링을 수행하였다. 지하수 양수 전의 정상 상태 수치 모델링 결과에서는 지하수 유동 및 염분 이동의 측면에서 대상지역의 수리지질학적 특성이 잘 반영되어 나타났다. 또한 지하수 양수 시의 비정상 상태 수치 모델링 결과에서는 지형과 지층의 특성에 따라서 염분 이동의 양상이 특징적으로 나타났으며 양수정의 위치에 따른 염분 농도의 시간적 공간적 분포의 변화를 효과적으로 예측할 수 있었다. 이러한 결과들은 향후 연구지역 뿐만 아니라 국내의 다른 해안 지역에서 지하수 자원의 개발 시에 해수 침투의 양상을 파악하고 예측하는데 효과적으로 활용될 수 있을 것으로 기대된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.163-163
• /
• 2012

차세대 모바일용 전자디스플레이로 각광받고 있는 FOLED (flexible organic light emitting display)의 연구에서 display의 신뢰성과 수명은 매우 중요한 연구 테마이다. OLED의 수명단축에 영향을 미치는 요소는 수분에 의한 열화가 가장 치명적이다. Barrier layer를 통한 수분의 주요 침투경로는 pin-hole과 void 등과 같은 defect에 의한 것으로 보인다. 수분의 침투 경로를 제어하는 OLED용 barrier layer의 요구조건은 WVTR (water vapor transmission rate)이 $10^{-6}g/m^2{\cdot}day$ 이하로 낮아야 한다. Barrier layer가 가져야 할 핵심적인 조건은 유연성을 가지면서 동시에 WVTR 값이 매우 낮아야 하는데, 아직까지 이를 만족하는 barrier layer의 개발은 아직 덜된 실정이다. 본 연구에서는 PET (polyethylene terephthalate) 기판에 sputtering법으로 barrier layer를 제조하였다. 증착에 이용한 타겟은 두가지 종류인 Al과 $Al_2O_3$를 사용하였으며, 다층박막으로 제조하였다. 제조된 barrier layer의 수분침투 특성은 WVTR의 측정으로, 유연성의 평가는 in-situ fatigue test를 수행하여 측정하였다. 종합적인 특성 평가를 위하여 SEM과 AFM (atomic force microscope) 관찰도 하였다.

• Journal of the Society of Disaster Information
• /
• v.11 no.3
• /
• pp.318-328
• /
• 2015

Effective urban flood reduction and restoration of natural water cycle at present include the application of permeable pavements. The application of permeable pavement addresses urban water cycle and disaster related events which gained attention internationally. However, few researches have been conducted to investigate unsaturated behavior and evaluate the water characteristics curves of these type of pavement materials most especially in the unsaturated state. In this study, first the saturated permeability and the soil-water characteristics curve of a pervious concrete are evaluated based on laboratory tests, and, based on experimental results, the infiltration of permeable pavement system is numerically modelled. In the soil-water characteristics curve of a pervious concrete, the volumetric water content drops very steeply after the air entry value with increasing matric suction. From the finite element analyses, the performance of the permeable pavement when compared to impermeable pavement, confirmed that the whole system effectively delayed and reduced runoff.

• Journal of Korean Society of Forest Science
• /
• v.83 no.3
• /
• pp.391-399
• /
• 1994

This study was carried out to investigate the water storage charateristics of surface soil by different forest floor conditions and to measure water storage capacity of forest Land at the Yeungnam University forest in Yongjang-ri, Nenam-myoen, Kyongju-gun, Kyongsangbuk-do. The study was conducted for 4 months, from June to September, 1993. The results were summarized as follows ; 1. Infiltration capacity of surface soil for each. forest floor condition was in the order : Oak forest>Oak forest removed $A_o$ layer>Pine forest removed $A_o$ layer>Pine forest>Bare land>Grasses. 2. The absolute values of infiltration capacity were increased as the rain intensity increased, while the order of infiltration capacity for each floor condition was not changed. 3. Infiltration capacity was highly correlated with surface soil hardness and todal pores. 4. Infiltration formula based on the Horton's could be estimated at each forest floor condition. 5. The model for water storage capacity of forest land expressed by infiltration capacity was estimated using total pores and soil hardness. This study indicates water storage capacity of different forest floor conditions depends on infiltration capacity. Using these formula, it was possible to calculate and estimate water storage capacity of forest land. Therefore, the result of this study will be helpful to increase water storage capacity of forest land and to manage water resources effectively.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.235-242
• /
• 2022

The percolation threshold of the CNT-reinforced cement paste is closely related to the optimal CNT amount to maximize the sensing ability of self-sensing concrete. However, the percolation threshold has various values depending on the cement, CNT, and water-to-cement ratio used. In this study, a percolation simulation model was proposed to predict the percolation threshold of the CNT-reinforced cement paste. The proposed model can simulate the percolation according to the amount of CNT using only the properties of CNT and cement, and for this, the concept of the number of aggregated CNT particles was used. The percolation simulation consists of forming a pre-hydrated cement paste model, random dispersion of CNTs, and percolation investigation. The simulation used CNT-reinforced cement paste with a water-cement ratio of 0.4 to 0.6, and the simulated percolation threshold point showed high accuracy with a simulation residual ratio of up to 7.5 % compared to the literature results.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.4
• /
• pp.79-88
• /
• 2007

Concrete structures undergo degradation of durability performance and it generally propagates to the structural problems. Recently. a lot of materials for surface protection for concrete are developed, however, performance is not clearly improved due to the difficulties such as repair construction technique and quality of materials for repairing. In this study, liquid inorganic impregnant for concrete structures is developed and durability performance for impregnated concrete specimens is carried out. Furthermore, the performances of the concrete specimens with developed impregnant is also compared with those of the specimens with impregnant conventionally used. Additional CSH gel is formed through the reaction of calcium hydroxide ($Ca(OH)_2$) and impregnant with silicate. As a result of the reaction, impregnated concrete is evaluated to have more denser surface and resistance to deterioration. Finally it is experimentally verified that the concrete specimens with developed impregnant show better durability performance than normal specimens and those with conventional impregnant.

• Journal of Korea Water Resources Association
• /
• v.37 no.8
• /
• pp.613-622
• /
• 2004

The simulation results of final closing by the developed model considering the flows through tide embankment of non-Darcy and through sluice gate agree well to the observed data which shows the model applicability. In comparative analysis with observed data, the simulation results by Homma(1958) are more accurate than those by Na(1987). The free flow equation with discharge coefficient, regardless of free or submerged flows, by Na based on the submergence ratio is applicable to the engineering practices. Because two simulated discharges are greater than the actual one, the correction of discharge coefficients reflecting the irregular section of actual closing gap situation is necessary. In the hydraulic analysis of final closing, the flow through tide embankment has been generally analysed by Darcy. Hydraulic analysis by the correct discharge through tide embankment of non-Darcy flow is necessary, because the ratio between flows through tide embankment and closing gap is relatively great at final closing.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.2
• /
• pp.103-109
• /
• 2009

Soils originated from limestone, located at the southern part of Kangwon province and Jecheon, Danyang of Chungbuk province are mainly composed of fine texture, and have different properties from soils originated from granite and granite gneiss, especially for water movement. This study was conducted for classification of hydrologic soil group (HSG) of soils originated from limestone by measuring the infiltration rate of surface soils and percolation rate of sub soils. Soils used for the experiment were 6 soils in total : Gwarim, Mosan, Jangseong, Maji, Anmi and Pyongan series. Infiltration and percolation rate were measured by a disc tension infiltrometer and a Guelph permeameter, respectively. Particle size distribution and organic matter content of the soils were analyzed. HSG, which was made by USDA NRCS(National Resources Conservation Service) for hydrology, of Gwarim series with O horizon of accumulated organic matter was classified as type A which show the properties of low runoff potential, rapid infiltration and percolation rate. HSG of Mosan series, which has high gravel content and very rapid permeability, was classified as type B/D because of the impermaeble base rock layer under 50cm from surface. HSG of Jangseong series with shallow soil depth was classified as type C/D owing to the impermaeble base rock layer under 50cm from surface. HSG of Maji series was type B, and HSG of Anmi series used as paddy land was type D because of slow infiltration and percolation rate caused by the disturbance of surface soil by puddling. HSG of Pyeongan series having a sudden change of layer in soil texture was type D because of the slow percolation rate caused a the layer.

• Analytical Science and Technology
• /
• v.30 no.5
• /
• pp.270-278
• /
• 2017

The absorption of blood onto the surfaces of white cotton, polyester, rayon, and nylon fabrics was studied. Different categories of fabrics (woven and knitted) with diverse thickness, were manually folded twice to obtain four fabric layers, and $100{\mu}L$ of human blood was dropped onto the surface of the fabrics. The amount of blood that penetrated the fabric layer and the shape of bloodstain observed on the fabrics were influenced by the chemistry, thickness, and texture of the fabric. The blood bearing fabrics were left to dry for 3 days, washed by hand using tap water, and Lumiscene was then sprayed onto the fabrics to enhance the latent bloodstain for comparison of the shape of the bloodstain before and after washing by hand. The features of the bloodstain after washing varied greatly with the recipient fabrics. Additionally, stronger luminescence was observed at the surface where the blood was deposited compared to the background. However, it was confirmed that physical contact during the washing can deform the original shape of the bloodstain. The effect of the drying time on the bloodstain after hand washing was also studied. $100{\mu}L$ of blood was dropped on the surfaces of the fabrics and dried for 0, 1, 12, 24, 72 h, and 7 days, then washed by hand, before the bloodstain was enhanced with Lumiscene. The results of this experiment indicated that the increased drying time induces stronger chemiluminescence of Lumiscene. However, after drying of the bloodstain for 7 days, the luminescence of the bloodstain was decreased at the blood deposited site and increased around the blood deposited site.

• Journal of the Korea Concrete Institute
• /
• v.24 no.5
• /
• pp.553-558
• /
• 2012

Airborne chlorides are transported to inland by sea wind to be attached to seashore concrete structure surface then penetrated into concrete structure members. Since the surface attached chloride amount are dependent on the amount of airborne chlorides, the prediction of distribution of airborne chlorides is important information in preventing chloride corrosion problems in seashore concrete structures. The prediction of surface chloride amount from airborne chlorides environment is extremely difficult than concrete directly in contact with seawater. In addition, their penetrating tendency is different from that of concrete immersed in seawater. In this study, properties of surface and penetrated chlorides under airborne chlorides environment are investigated. Concrete specimens were manufactured and exposed to marine environment for 3 years. The specimens were analyzed at the time durations of 1, 2, and 3 years to check surface chloride amount to penetrated chloride depth. The results revealed that there were certain differences according to surface roughness of concrete and with and without washing effect due to rainfalls. The evaluation results showed that penetrated chlorides depend on amount of airborne chlorides and duration of exposure. In addition, a notable tendency of having deeper chloride penetration and higher chloride content in concrete members under long-term exposure was observed.