• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.4
• /
• pp.107-113
• /
• 2009

This paper considers the influence of floc on the sedimentation rate for the cohesive material. The effects of floc density and size changes were also taking into consideration during the experiment. The settling velocity of a discrete floc was measured in a quiescent water column. Floc diameter and density were investigated using a modified Stokes equation with some constants such as water density, viscosity, material density and the floc fractal dimension $n_f$ obtained from the relationship between the floc diameter and the floc settling. The floc diameter of quartz and alumina increased at increasing initial concentrations. The floc size of quartz with increasing NaCl concentration varied between approximately 0.8 um to $10{\mu}m$. Floc density decreased as floc size increased. The floc settling velocity and the floc diameter have a straight line relationship on a logarithm. The floc fractal dimension nf was 2.65 with increasing of initial concentration and 2.93 with increasing of NaCl. The exponent n to predict the settling velocity was proposed and varied from 1 to 1.93.

• Resources Recycling
• /
• v.2 no.2
• /
• pp.16-21
• /
• 1993

This study was carried out to investigate the settling characteristics of Fe(II) and Fe(III) hydroxide precipitates formed by pH adjustment of aqueous solution to remove ferrous and ferric ion in waste water. The results obstained in this study are as fellows : The settling rate was effectively increased with increasing the pH values of aqueous solution regulated by CaO and with increasing the amount of flocculant, on the other hand, application of excess flocculants decreased the settling rate. It is desirable that the concentration of iron ion is kept under $10^{-2}$ mol/ㅣ because the settling rate was decreased with increasing the concentration of iron hydroxide precipitates.

• Journal of the Korean Chemical Society
• /
• v.42 no.2
• /
• pp.220-227
• /
• 1998

Homogeneous precipitation of $Y^{3+}$ with urea has been studied in order to investigate the effect of urea concentration on the preparation of monodispersed colloidal "Yttrium Hydroxycarbonate $(Y(OH)CO_3 \cdot nH_2O)$". As the initial concentration of urea increased, the mean size of colloidal precipitates decreased, and the rate of precipitation of $Y^{3+}$ increased. When the initial concentration of urea was higher than $4.0 \sim 7.0 M$, precipitates obtained were no more monodispersed colloidal particles, but coagulated big particles; and, although the initial concentration of urea increased over 4.0 M, the rate of precipitation did not increased. It is important to decide the proper initial concentration of urea, because excessive urea can cause the environmental problems such as water pollution.

• Resources Recycling
• /
• v.30 no.6
• /
• pp.3-11
• /
• 2021

In this study, the effect of the solubility of ammonium metavanadate and the decomposition ratio of ammonium ions on a precipitation reaction-the precipitation of ammonium metavanadate by adding ammonium chloride to a sodium vanadate solution-was investigated. As the precipitation temperature and pH increased, the decomposition ratio of ammonium ions increased, and the decomposition ratio was greater than 81% at 45 ℃ and pH 9.3. This was approximately four times higher than that at pH 8. The result of the precipitation reaction, in view of these two factors that significantly influence the precipitation reaction, was that the precipitation yield increased as the temperature increased. However, the effect of temperature was not significant above 35 ℃. A kinetic study of the precipitation reaction revealed that the activation energy of the reaction was 42.3 kJ/mol. Therefore, considering the solubility of ammonium metavanadate, the lower the temperature, the better the vanadium recovery yield. Additionally, considering the decomposition of ammonium ions, the lower the pH of the aqueous solution, the more advantageous. However, at pH 8 or less, sodium polyvanadate is precipitated and the purity of vanadium oxide may reduce.

• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.544-549
• /
• 2022

This study presents the negative pressure cavitation acetone-pentane fractional precipitation to dramatically improve the precipitation efficiency of paclitaxel from Taxus chinensis. When paclitaxel was precipitated under a negative pressure of -200 mmHg, most paclitaxel (>99.9%) could be recovered in a short precipitation time (5 min). The precipitation rate constant increased by 1.512~5.073 times (at -50 mmHg to -200 mmHg) compared to the control. The activation energy decreased by -3,737~-6,536 J/mol due to negative pressure, which increased the precipitation rate. With the introduction of negative pressure, the precipitate size decreased by 5.3 times, and the diffusion coefficient of paclitaxel increased by 7.0 times.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.10a
• /
• pp.47-50
• /
• 1997

희토류원소의 광 환원 침전 특성이 연구되었다. 환원제로 isopropyl alcohol, 침전제로 (NH$_4$)$_2$SO$_4$가 사용되었다. 그리고 250nm의 파장을 방출하는 수은 램프가 사용되었다. Eu원소만을 함유하는 용액으로부터 Eu+3의 Eu+2로의 광 환원 결과는 97%이상이었으며 과산화수소가 소량 첨가되었을 경우 침전 속도는 증가하였다. 이 결과를 토대로 하여 희토류원소들(Sm,Eu,Gd)을 함유하는 수용액과 유기용액(HDEPH-Dodecan)에 UV광을 조사하였을 시 선택적으로 Eu을 분리해 낼 수 있었다. Eu의 침전 회수율은 두 상의 경우 모두 97%이상이었다.

• Korean Chemical Engineering Research
• /
• v.59 no.3
• /
• pp.379-392
• /
• 2021

In this study, an improved acetone-water fractional precipitation process for paclitaxel using ultrasonic cavitation bubbles and gas bubbles was developed. Compared to the conventional method, the time required for precipitation has been reduced by 20~25 times. In addition, the particle size of paclitaxel decreased by 3.5~5.5 times and the diffusion coefficient of paclitaxel increased by 3.5~6.7 times. In the case of precipitation using ultrasonic cavitation bubbles, as the ultrasonic power increased and the temperature decreased, the precipitation rate constant increased. In the case of precipitation using gas bubbles, as the gas flow rate increased and the temperature decreased, the precipitation rate constant increased. Thermodynamic parameters revealed the exothermic, irreversible, and nonspontaneous nature of the improved fractional precipitation.

• Resources Recycling
• /
• v.29 no.5
• /
• pp.28-37
• /
• 2020

In this study, the effect of precipitation temperature, ammonium chloride amount and addition method, vanadium and sodium hydroxide content of the solution on the precipitation of ammonium metavanadate were examined by using the sodium vanadate(NaVO₃) solution in alkali region as a starting material. As the pH of solution decreased, the addition amount of ammonium chloride and the vanadium content of the solution increased, the precipitation rate of ammonium metavanadate increased. In this research condition, the basic conditions for obtaining more than 90% of precipitation yield were 10,000mg/L of vanadium content, 2equivalents of ammonium chloride addition, room temperature, and 2 hours of precipitation time. The size of precipitated particles decreased with increasing precipitation rate. Especially when liquid ammonium chloride was injected into the solution, the precipitation rate was the slowest and the particle size of the precipitate was the largest. After the primary precipitation by adding ammonium chloride as a solid, the secondary precipitation was carried out by adding new reactants. At this time, the precipitation with added ammonium chloride solid was not affected by the precipitates present in the solution. However, when liquid ammonium chloride was added, new precipitate was deposited on the surface of the precipitate present in the solution, increasing its size. Due to the difference in ammonium metavanadate solubility to temperature, the precipitation temperature at the vanadium content of 10,000mg/L in the solution affected the precipitation rate of ammonium metavanadate and the precipitation temperature did not affect the precipitation rate at a high concentration of more than 30,000mg/L vanadium content in the solution.

• Economic and Environmental Geology
• /
• v.46 no.1
• /
• pp.29-37
• /
• 2013

In order to apply the silver cementation method using Fe powder from pregnant thiourea leaching solution. Parameters such as the amount of Fe powder addition, agitation speed, and temperature were investigated. The silver cementation rate was increased by the increasing of Fe powder addition, agitation speed, and temperature. The highest silver cementation rate was found when the addition of Fe powder was 50 g/L at the agitation speed of 500 rpm. The silver cementation rate increase with increasing temperature according to the Arrhenius equation and obeys $1^{st}$ order kinetics. The activation energy from the kinetics data was found to be between 13.73 KJ/mol and 17.02 KJ/mol. In the XRD analysis, goethite was detected in the precipitate of the thiourea leach solution. This indicates that an oxidation-reduction reaction had occurred in the thiourea solution due to the addition of the Fe powder.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.1
• /
• pp.40-49
• /
• 1999

A laboratory flume experiment, using turbulence-generating acryl tank and natural sediments, was conducted to investigate the effects of salinity, concentration of suspended sediment, turbulence and clay minerals on the flocculation and settling of fine-grained suspended sediments. While experiments were run, a sequence of water samples were taken near the bottom of the tank to analyze the variations of size distribution and relative contents of clay minerals. The results of the salinity experiment indicate that median settling velocity ($W_{50}$) increases linearly with salinity. Different settling processes of suspended sediments under variable concentrations appear to be predictable, depending upon the range of the suspension concentration. At concentrations less than 200 mg/l, $W_{50}$ is rarely varied with concentration probably because of the individual--grain settling mode. In the range of 200 to 13,000 mg/l show $W_{50}$ and concentration a good relationship following an empirical formula: $W_{50}=0.45C^{0.44}$. This relationship, however, no longer holds in concentrations exceeding 13,000 mg/l; instead, a more or less reverse one is shown. This result suggests an effect of hindered settling. The turbulence effect is somewhat different from that of concentration. Turbulence accelerates the flocculation and settling susepended sediments at low concentration (200 mg/l), whereas at high concentration turbulence breaks floes down and impedes the settling. Size distribution of suspended sediments sampled near the bottom of the tank tend to be more negatively skewed and leptokurtic in turbulent conditions compared to those in static conditions. The clay mineral analysis from the sequential water samples shows that over time the content of smectite decreases most rapidly with illite remaining concentrated in suspension. This means that smectite, among other clay minerals, plays the most effective role in the flocculation of fine-grained sediment in saline water.