• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1683-1696
• /
• 1991

본 연구에서는 정4각단면덕트 입구영역에서 층류맥동유동(laminar pulsating flows)의 유동특성을 이론 및 실험적으로 규명하기 위하여, 이론적 방법으로 덕트 입 구영역에서의 층류맥동유동에 대한 운동량방정식을 유도한 후 비선형인 대류항을 선형 화 시켜서 라플라스변환으로 속도분포식의 해를 구하였고, 실험적인 방법으로는 시험 덕트 크기는 횡단면의 가로*세로가 40mm*40mm이고, 길이가 4000mm인 정4각단면덕트 입구영역에서 송풍기에 의한 공기흡입유동으로 층류진동유동을 발생하며 이들 두유동 을 합성시켜 발생한 층류맥동유동에 대하여 열선유속계의 열선신호로부터 얻어진 속도 파형을 고찰하여 덕트내의 맥동유동에 대한 임계레이놀즈수를 결정하고 속도분포를 측 정하였다. 그리고 이론적으로 얻어진 속도분포식과 열선유속계로 측정한 속도분포를 비교검토하여 정확성을 검증하고, 이들 해석결과로 부터 층류맥동유동의 입구길이(en- trance lenght)식을 결정하여 제안하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.240.1-240.1
• /
• 2014

대기압 플라즈마 제트 장치에 주입되는 기체의 유량 변화에 따른 방전 특성을 유체역학적으로 해석하였다. 장치에 주입되는 기체의 유량 변화는 레이놀즈수에 의한 유체 흐름의 상태 변화와 베르누이 정리에 의한 압력 변화를 동반한다. 유리관에 주입되는 기체의 레이놀즈수가 Re<2000이면 층류이며 Re>4000이면 난류, 2000

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.6
• /
• pp.639-646
• /
• 2012

The characteristics of autoignited lifted flames in laminar jets of carbon monoxide/hydrogen fuels have been investigated experimentally in heated coflow air. In result, as the jet velocity increased, the blowoff was directly occurred from the nozzle-attached flame without experiencing a stabilized lifted flame, in the non-autoignited regime. In the autoignited regime, the autoignited lifted flame of carbon monoxide diluted by nitrogen was affected by the water vapor content in the compressed air oxidizer, as evidenced by the variation of the ignition delay time estimated by numerical calculation. In particular, in the autoignition regime at low temperatures with added hydrogen, the liftoff height of the autoignited lifted flames decreased and then increased as the jet velocity increased. Based on the mechanism in which the autoignited laminar lifted flame is stabilized by ignition delay time, the liftoff height can be influenced not only by the heat loss, but also by the preferential diffusion between momentum and mass diffusion in fuel jets during the autoignition process.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.4
• /
• pp.927-936
• /
• 1990

본 연구에서는 정4각 단면덕트의 입구영역에서 층류 정상유동의 유동특성을 이론적 및 실험적인 방법으로 속도파형과 속도분포를 얻어서 유동이 발달되고 있는 유 동특성과 입구길이를 규정하였다. 이론적인 방법으로는 덕트입구영역에서 공기유동 에 대한 운동량방정식을 유도한 후, 운동량방정식 중의 비선형인 대류항을 선형화시켜 서 Laplace변환으로 속도 분포식의 해를 구하였고, 실험적인 방법으로는 시험덕트의 크기가 40*40*4,000nm(가로*세로*높이)인 정 4각단면덕트에 송풍기로 공기를 흡입 하여 정상유동을 얻었고, 열선유속계에 의하여 속도파형과 속도분포 등의 측정한 결과 를 이론식과 비교검토하였다.

• Fire Science and Engineering
• /
• v.8 no.1
• /
• pp.9-20
• /
• 1994

To understand the phenomena of laminar diffusion flame along vortical walt, the numerical analysis has been performed. Keller-box method was used to solve the problem in the boundary layer. The governing equation is simplified by thin-flame approxiamtion. And energy and chemical species equations are normalized with Schvab-Zeldovich variables. A physical domain is divided the boundary layer along streamwise coordinate as the combustion region and the propagation region. And Radiation model is concerned in these region. As a result, typical phenomena have been observed. Comparison of the numerical results with experimental data shows that the present method can successfully predict phenomena of laminar diffusion flame along upright surface.

• Membrane Journal
• /
• v.4 no.4
• /
• pp.221-231
• /
• 1994

The GR51PP(MWCO 50,000) and GR40PP(MWCO 100,000) membranes manufactured by DDS were used in ultrafiltration of dextran(Mw. : 500,000) solution in flat plate ultrafiltration cell filled with various types of turbulence promoters. The flux improvement by using turbulence promoter was higher in laminar flow region than in turbulent flow region. The maximum improvements of permeate flux were foud as 112% and 50% I laminar flow region and turbulent flow region, respectively. Also, the solute rejection of the ultrafiltration membrane was improved by turbulence promoters and its effect was significant in the high transmembrane pressure and laminar flow region. The smaller the spacer mesh size was used, the higher the flux improved, but the pressure drop in ultrafiltration cell also increased. In laminar flow region, pressure drop by the spacer was negligible, but in turbulent flow region it changed significantly depending upon the mesh size of the spacer and therefore, its mesh size must be baken into account in the design of the process. The predicted results of the modified mass transfer correlation had better agreement with experimental results than those of unmodified one, The modified mass transfer correlations for laminar and turbulent flow region are shown as follow. $N_{sh}=0.151(N_{Re})^{0.199}(N_{Sc})^{0.22}(N_{Scm})^{0.197}\;(625 $N_{sh}=0.0165(N_{Re})^{0.428}(N_{Sc})^{0.33}(N_{Scm})^{0.223}\;(5015

• Journal of the Korean Vacuum Society
• /
• v.22 no.3
• /
• pp.111-118
• /
• 2013

The influence of gas flow on the plasma generation in the atmospheric plasma jet is described with the theory of hydrodynamics. The plasma discharge is affected by the gas-flow streams with Reynolds number (Re) as well as the gas pressure with Bernoulli's theorem according to the gas flow rate inserted into the glass tube. The length of plasma column is varied with the flow types such as the laminar flow of Re<2,000 and the turbulent flow of Re>4,000 as it has been known in a general fluid experiments. In the laminar flow, the plasma column length is increased as the increase of flow rate. Since the pressure in the glass tube becomes low as the increase of flow velocity by the Bernoulli's theorem, the breakdown voltage of plasma discharge is reduced by the Paschen's law. Therefore, the plasma length is increased as the increasing flow rate with the fixed operation voltage. In the transition of laminar and turbulent flows, the plasma length is decreased. When the flow becomes turbulent as the flow rate is increasing, the plasma length becomes short and the discharge is shut down ultimately. In the discharge of laminar flow, the diameter of plasma beam exposed on the substrate surface is kept less than the glass diameter, since the gas flow is kept to the distinct distance from the nozzle of glass tube.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.3
• /
• pp.345-352
• /
• 1985

본 연구에서는 내류(internal flow)에서 유로가 비대칭으로 급확대될 경우의 박리현상과 유동현상을 고찰하였다. 비대칭 급확대 채널에서의 층류영역에서 난류영 역까지의 유동현상을 B.F. Armaly, C.E. Thomas는 실험적 해석과 유한요소법을 사용하 여 이론적 해석을 하였고 Donald. M. Kuehn, Denham & Patrick, Kwon, Patrick J. Ro- ache, Anand Kumar등은 같은 모델에 대해서 실험적 해석과 유한차분법을 사용하여 이 론적 해석을 하였으며 지금까지의 유한해석법에 의한 연구는 입구와 출구조건이 같은 경우 및 밀폐 공간 혹은 한면의 속도가 주어지는 밀폐공간등에 대해 수행되어 왔으나 본 연구에서는 입구와 출구조건이 같지 않은 2차원, 비대칭 급확대 채널에서의 유동현 상을 유한해석법으로 해석하여 실험치와 비교하였다.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.3
• /
• pp.109-114
• /
• 1992

The purpose of this study is to experimentally research the effects of polymer additives on turbulent transition of Couette flow between concentric cylinders when outer one is rotating and inner one is at rest; the diameter ratio being 0.2. Aqueous polymer solution generate the degradation phenomena in machine forming work, but this is not effected in about 10 minute at 5ppm. aqueous polymer solution testing. The Reynolds number, referred to the gap distance and rotation velocity of the outer cylinder, of turbulent transition is about 20000 for water flow. In the laminer region, the torque value is as same as theoretical one in the region of low Reynolds number, but becomes high with an increase in the Reynolds number. The polymer additives reduce the Reynolds number for turbulent transtition. In the turbulent region, the torque is remarkably reduced by the polymer additives, soluble polymer take down effect of turbulent transition boundary torque.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.547-552
• /
• 2015

이번 연구에서는 Ali & Ramadhayni[2]에 의해 실험된 corrugated fin에 Cross-Cutting을 하여 압력강하를 2-D Laminar 영역에서 분석하였다. 분석 지표로는 Pressure drop의 무차원화된 지표인 friction factor를 사용하였고, corrugation angle을 $10^{\circ}$, $20^{\circ}$, $30^{\circ}$로 변화 시켜가며 진행하였다. Cross-Cutting의 길이는 $0.3D_h$길이로 고정시켜 계산하였고, 모든 값은 $D_h=2l$로 무차원화 하였다. Corrugated Fin의 경우, Corrugation Angle에 따라 층류영역에서 주기성을 가진 vortex shedding이 일어나는데, 그 때의 레이놀즈 수를 본 연구에서는 임계 레이놀즈 수라 하고, Vortex Shedding이 일어나기 시작하는 $Re_{cr}$ 이하에서 연구를 진행하였다.