• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.139-141
• /
• 2014

This paper shows effects of tropospheric delay models among delay features occurred when GPS code signal is transferred for GPS Time Transfer. GPS time transfer uses CGGTTS as the international standard format. For geodetic GPS receiver, ROB has provided r2cggtts software which generates CGGTTS data from RINEX data and all laboratories participated in TAI link uses the software and send the CGGTTS results periodically. Though Saastamoinen model and Niell mapping function are commonly used in space geodesy, r2cggtts software applied NATO model and CHAO mapping function to the tropospheric delay model. Hence, this paper shows effects of two tropospheric delay models implementing Saastamoinen model and Niell mapping function for the time offset.

• Journal of Astronomy and Space Sciences
• /
• v.24 no.3
• /
• pp.249-260
• /
• 2007

The crustal deformation due to Ocean Tide Loading (OTL) in the Korean peninsula reaches up to ${\sim}3cm$ in the vertical direction. Considering that the achievable positioning accuracy of current state-of-the-art space geodesy technologies is at the several millimeter level, the centimeter-level OTL effect should be precisely modelled and corrected for. This study begins with comparison of ocean tide models and validation of OTL-prediction softwares. Different ocean tide models caused about ${\sim}6mm$ RMS differences in the vertical deformation in the Kyung-gi Bay area. When we analyzed the OTL displacements in the Seoul, Ulsan, and Seogwipo areas where three VLBI observatories are planned to be installed, the maximum displacement of ${\sim}3.5cm$ was predicted in the Seogwipo area and ${\sim}2cm$ in the Seoul and Ulsan areas. When the OTL corrections were not applied in the GPS data processing, the OTL effect propagates into the Zenith Wet Delay (ZWD) estimates, and the scale factor between ZWD differences and OTL displacements was 3.72.

• Journal of Bio-Environment Control
• /
• v.26 no.1
• /
• pp.1-6
• /
• 2017

The paprika has emerged as one of the highest-income crops by increase in dimestic and export demand in the greenhouse crops. Nevertheless, there is no standard for fertigation in soil, because general culture system is soilless culture. This study was conducted to establish the optimum nitrogen and potassium application level for paprika fertigation. Four different levels of nitrogen and potassium were applied, treatment levels were 0.5, 1.0, 1.5, 2.0 times of pimiento fertilization recommendations based on soil testing. Experiment to instigate the optimum amounts of nitrogen and potassium were carried out in 2012 and 2013, respectively13. Nitrogen application : stem diameter of 0.5 times was significantly lower than other treatments, but stem length was not affected by nitrogen fiertigation levels. Number of fruit and yield of first fruiting group harvest were not significant difference. but those of the second fruiting group were decreased by increasing nitrogen level beyond 1.0 times treatment and were the lowest in 0.5 times treatment. Overall, the optimum level of nitrogen for fertigation was judged 1.0 times of pimiento fertilization recommendations based on soil testing. Potassium application : Growth was no signigicant trend except stem length. Number of locule, fresh thickness and sugar content were not significant difference. Number of fruit and yield were not significant difference at the first and second fruiting group harvest. But those were significant difference at third fruiting group harvest, maximum yield was obtained by 1.5 times fertigation level. The optimum level of potassium for fertigation was judged 1.5 times of pimiento fertilization recommendations based on soil testing.

• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.343-347
• /
• 2012

The purpose of this study was to examine the dwarfing effect in variable temperature treatments on 1-year-old and 3-year-old Chloranthus glaber. The plants grown in four difference growth chamber under a mean light intensity $500{\pm}20$ lux, RH of $40{\pm}5%$, and temperature of $5^{\circ}C$, $10^{\circ}C$, $15^{\circ}C$, and $20^{\circ}C$ for 120 days from January 3, 2011. And then they were moved into a glass house (50% shading). In 1-year-old seedlings, the rate of plant height elongation was lowest at $5^{\circ}C$, but plant growth was not good. The number of leaves and leaf width were highly increased by $10^{\circ}C$ treatment although the plant height was slightly increased. Also the plant height of $15^{\circ}C$ and $20^{\circ}C$ was decreased and defoliation was started from the bottom leaves. Thus, $10^{\circ}C$ treatment was thought to be the most appropriate for dwarfing effect of 1-year-old seedlings. In 3-year-old seedlings, the plant height tended to increase with temperature, and growth pattern showed a similar trend between $5^{\circ}C$ and $10^{\circ}C$, $15^{\circ}C$ and $20^{\circ}C$. The number of leaves increased the most at $5^{\circ}C$. Lateral branches per node were mainly occurred at $5^{\circ}C$ and $10^{\circ}C$, whereas they almost didn't happen at $15^{\circ}C$ and $20^{\circ}C$. Flowering rate at $5^{\circ}C$ and $10^{\circ}C$ reached more than 90% and 60%, respectively, but it was too low at $15^{\circ}C$ and $20^{\circ}C$ until the end of August. From these results, it could improve plant quality of 1-year-old and 3-year-old Chloranthus glaber making compact potted plants when temperatures were maintained at $10^{\circ}C$ and $5^{\circ}C$, respectively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.5
• /
• pp.343-351
• /
• 2015

It is well-known that even the DGNSS (Differential Global Navigation Satellite System) technique in navigation for ground vehicles can only provide several meters of accuracy, such that it is suitable for simple guidance. On the other hand, centimeter to millimeter level accuracy can be obtained by using carrier phase observables in the field of precision geodesy/surveying. In this study, a preliminary study was conducted to apply NRTK (Network-RTK) by NGII (National Geographic Information Institute) to ground vehicle navigation. Onboard GNSS receivers were used for NRTK throughout the country, and the applicability of NRTK on navigation was analyzed based on NRTK surveying results. The analysis shows that the overall ambiguity fixing rate of NRTK is high and is therefore possible to apply it for navigation. In urban areas, however, the fixing rate decreases sharply, therefore, it needs to employ a method to minimize the effect of the float solutions, which can reach up to 10 meters. It is still feasible to obtain a centimeter level of accuracy in some area using NRTK under certain conditions. But, the ambiguity fixing rate of FKP falls down to 55% for high speed vehicles, and so the surveying accuracy should be determined by considering various factors of surveying environments. In addition, it is difficult to fix ambiguities using single-frequency GPS receivers. Finally, several suspicious NRTK(FKP) connection problems occurred during atmospheric disturbances (phase two or up), which should be investigated further in upcoming research.

• Korean Journal of Plant Tissue Culture
• /
• v.26 no.3
• /
• pp.189-195
• /
• 1999

This study was carried out to clarify several factors affecting embryogenesis from anther culture of nine cultivars in Brassica oleracea L. var. italica and to investigate the characteristics of plants derived from anther culture. Androgenesis from anther culture was elevated on the B5 medium supplemented with 0.1mg/L NAA, 0.1mg/L 2.4-D and 10% sucrose. Embryo production in liquid medium was five-fold higher than solid medium. High temperature treatment at 35$^{\circ}C$ for one day before transfer to culture room maintained at $25^{\circ}C$ had effective to induce embryogenesis of cultured anthers but extended treatment at 35$^{\circ}C$ decreased significantly the percent of embryogenesis. Frequency of embryogenesis from cultured anthers exhibited significant difference from 2.8% in 'Green Valiant' to 21% in 'Haisi' as affected by genotypes. Percent of spontaneously dihaploid among regenerated plants from anther culture was ranged from 62 to 74% as affected by the genotypes. Characteristic in relation to plant height, number of leaves and branches, and size of head from anther-derived plants showed differential variation in 'Rokguray' and 'Haisi'. Among these charaters obtained from two cultivars, five lines were selected for early maturity, long plant height and large head. Selected lines were used as breeding meterials for F$_1$ hybrid.

• Journal of Bio-Environment Control
• /
• v.13 no.1
• /
• pp.44-50
• /
• 2004

This experiment was conducted to investigate the effects of different levels of light intensity (100, 200, 400 ${\mu}mol\;{\codt}\;m^{-2}\;{\cdot}\;s^{-1}$, and natural light) on the growth and the fruit quality of cucumber(Cucumis sativus cv. Hyakunari-3). The results of this experiment indicated that plant height and length of lateral shoots were decreased under low light condition, but it was not significantly different among treatments. Leaf area and root weight were lowest under low light intensity(100 ${\mu}mol\;{\codt}\;m^{-2}\;{\cdot}\;s^{-1}$), but no significant differences were noted between 200 and 400 ${\mu}mol\;{\codt}\;m^{-2}\;{\cdot}\;s^{-1}$. Photosynthesis rate was decreased with reduced light intensity and total chlorophyll contents, root activity and xylem sap were also decreased under low light intensity, but there was no significant difference between 200 and 400 ${\mu}mol\;{\codt}\;m^{-2}\;{\cdot}\;s^{-1}$. From the SEM observation the erosion of the guard cells and closed stomata in low light treatment were shown and the size of stoma were small also the stomatal aperture were decreased with reducing the light intensity. Chlorosis in leaves and aborted-liked fruits were appeared under low light condition and Ca and Mg uptake in leaves were decreased by shading in proportion to the decrease of light intensity. Fruit yields were decreased by 65% under 400 ${\mu}mol\;{\codt}\;m^{-2}\;{\cdot}\;s^{-1}$, and by 80${\sim}$90% under 200 and 100 ${\mu}mol\;{\codt}\;m^{-2}\;{\cdot}\;s^{-1}$, compared to those under the natural light. This low intensity of light caused the sharp decrease in the early harvested yields within two weeks and the fruit yields of lateral shoots were greatly decreased.

• Korean Chemical Engineering Research
• /
• v.61 no.4
• /
• pp.523-541
• /
• 2023

As accessibility to 3D printers increases, there is a growing frequency of exposure to chemicals associated with 3D printing. However, research on the toxicity and harmfulness of chemicals generated by 3D printing is insufficient, and the performance of toxicity prediction using in silico techniques is limited due to missing molecular structure data. In this study, quantitative structure-activity relationship (QSAR) model based on data-centric AI approach was developed to predict the toxicity of new 3D printing materials by imputing missing values in molecular descriptors. First, MissForest algorithm was utilized to impute missing values in molecular descriptors of hazardous 3D printing materials. Then, based on four different machine learning models (decision tree, random forest, XGBoost, SVM), a machine learning (ML)-based QSAR model was developed to predict the bioconcentration factor (Log BCF), octanol-air partition coefficient (Log Koa), and partition coefficient (Log P). Furthermore, the reliability of the data-centric QSAR model was validated through the Tree-SHAP (SHapley Additive exPlanations) method, which is one of explainable artificial intelligence (XAI) techniques. The proposed imputation method based on the MissForest enlarged approximately 2.5 times more molecular structure data compared to the existing data. Based on the imputed dataset of molecular descriptor, the developed data-centric QSAR model achieved approximately 73%, 76% and 92% of prediction performance for Log BCF, Log Koa, and Log P, respectively. Lastly, Tree-SHAP analysis demonstrated that the data-centric-based QSAR model achieved high prediction performance for toxicity information by identifying key molecular descriptors highly correlated with toxicity indices. Therefore, the proposed QSAR model based on the data-centric XAI approach can be extended to predict the toxicity of potential pollutants in emerging printing chemicals, chemical process, semiconductor or display process.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.1
• /
• pp.31-43
• /
• 2015

This study had been aimed to conduct the camera calibration on VLBI antenna in the Space Geodetic Observation Center of Sejong City with a low-cost digital camera, which embedded in a mobile phone to determine the three-dimension position coordinates of the VLBI antenna, based on stereo images. The initial values for the camera calibration have been obtained by utilizing the Direct Linear Transformation algorithm and the commercial digital photogrammetry system, PhotoModeler $Scanner^{(R)}$ ver. 6.0, respectively. The accuracy of camera calibration results was compared with that the camera calibration results, acquired by a bundle adjustment with nonlinear collinearity condition equation. Although two methods showed significant differences in the initial value, the final calibration demonstrated the consistent results whichever methods had been performed for obtaining the initial value. Furthermore, those three-dimensional coordinates of feature points of the VLBI antenna were respectively calculated using the camera calibration by the two methods to be compared with the reference coordinates obtained from a total station. In fact, both methods have resulted out a same standard deviation of $X=0.004{\pm}0.010m$, $Y=0.001{\pm}0.015m$, $Z=0.009{\pm}0.017m$, that of showing a high degree of accuracy in centimeters. From the result, we can conclude that a mobile phone camera opens up the way for a variety of image processing studies, such as 3D reconstruction from images captured.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.3
• /
• pp.183-192
• /
• 2013

As a worldwide trend, the spatial information that is established by country, institution and purpose is integrated into the data with a single spatial reference to improve the data connectivity and usability. In this study, a new national single origin plane rectangular coordinate system was studied to efficiently respond to the changes in the spatial reference according to the introduction of a new national geodetic standard and to the demand of seamless data service in the spatial information sector. For this purpose, the Korean Peninsula was set as the projection region and the projection distortion in the projection region was analyzed. The projection parameters were defined to homogenize and minimize the projection distortion, and their standardization and registration on the international organizations were conducted. The study on the required optimal projection equation resulted in the Hooijberg projection equation and projection parameters (${\Phi}$, ${\lambda}$, K, N, E) resulted in $38^{\circ}N$ and $128^{\circ}E$ projection origin, and a scale factor of 0.99924. The proper false northing and easting were 700,000m N and 400,000m E, respectively, considering the introduction of country station index system.