• Journal of the Korean Orthopaedic Association
• /
• v.55 no.3
• /
• pp.229-236
• /
• 2020

Purpose: This study examined the utility of preliminary magnetic resonance imaging (MRI) measurements in the ultrasound-guided L4 selective nerve root block. Materials and Methods: As a retrospective study, 71 patients, who met the criteria for outpatient visits from March 2016 to December 2017, were included. From March 2016 to February 2017, 31 patients who underwent an L4 nerve root block without MRI were classified as group A, and 40 patients who underwent an L4 nerve root block through MRI measurements from March 2017 to December 2017 were classified as group B. Group A was injected under ultrasound-guidance through the pararadicular approach without a pre-interventional MRI evaluation, and group B was injected under ultrasound-guidance according to the preliminary MRI measurements. The results were assessed using the numeric rating scale scores before, three hours, and two, six, and 12 weeks after the procedure. Results: At three hours after the procedure, the proportion of patients better than good results were 51.6% in group A and 67.5% in group B. At two weeks after the procedure, the proportion of patients with better than good results were 48.4% and 70.0% in groups A and B, respectively; 58.1% and 62.5% of patient of groups A and B, respectively, showed better than good results after six weeks. In 12 weeks after the procedure, the results of group A and B were 67.7% and 62.5%, respectively. At three hours and two weeks after the procedure, group B showed significant symptom improvement than group A (p<0.05). The procedures were repeated 2.8 and 1.7 times in groups A and B, respectively, between two and six weeks for satisfactory pain relief (p<0.05). Conclusion: A pre-interventional MRI evaluation might improve pain relief within the initial two weeks after ultrasound-guided L4 selective nerve root block by improving the success rate of the procedure.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.6
• /
• pp.498-503
• /
• 2021

Purpose: The aim of this study were to find ideal entry point of straight antegrade humeral intramedullary nail (SAHN) for the treatment of proximal humerus fracture in Korean and to analyze anatomical conformity using computed tomography. Materials and Methods: From May 2014 to October 2016, the study was conducted retrospectively on 74 Korean patients who had taken computed tomography on both normal and affected shoulder joint as result of shoulder injury. The mean age of the patients was 64.5 years (range, 22-95 years). Radiologic evaluation was done using multiplanar reconstruction technique of the computer tomography on normal proximal humerus. We located ideal entry point of SAHN as the point where humerus intramedullary center axis and humeral head meet. Distance between the entry point and local anatomical landmark was measured. We defined the critical distance as the distance between entry point and the most medial point of the supraspinatus attachment site. For adequate fixation and avoidance of injury to rotator cuff, critical distance should be over 8 mm according to Euler, and we defined the critical type when it is less than 8 mm. Critical distance, sex, age, height, body weight, body mass index was evaluated for the statistical significance. Results: The ideal entry point was as follows: the mean anteroposterior distance, the sagittal distance to the lateral margin of bicipital groove, was 11.5 mm and the mean mediolateral distance, the coronal distance to the lateral margin of grater tuberosity, was 20.5 mm. The mean critical distance, distance from the entry point to the just medial to insertion of the supraspinatus tendon, was 8.0 mm. Critical type with critical distance less than 8 mm was found in 41 in 74 patients (55.4%). Conclusion: The ideal entry point of SAHN in Korean was located on 11.5 mm posteriorly from the lateral margin of bicipital groove and 20.5 mm medially from lateral margin of greater tuberosity. More than half of the cases were critical type. Since critical type can possibly cause rotate cuff injury during nail insertion on entry point, surgeon should consider anatomical variance before choosing surgical option.

• Journal of Life Science
• /
• v.31 no.12
• /
• pp.1094-1099
• /
• 2021

Hermetia illucens (Black soldier fly) is attracting attention as an environmental purification insect because it can supply a wide range of by-products of the agricultural food industry. Also, it has a potential feed for fish, birds, and pets due to a short life cycle and excellent nutritional components. Several pharmacological effects, including antimicrobial, of H. illucens have been reported. However, no study has focused on antiobesity effects of ethanol extract of H. illucens. In this study, we aimed to assess the anti-obesity effects of ethanol extract of H. illucens larvae (HIE) through inhibition of differentiation of 3T3-L1 preadipocytes into adipocytes. The amount of lipid accumulated in adipocytes was measured by oil red-O staining, and the inhibitory effect on adipogenesis was confirmed. The expression levels of factors related to adipocyte differentiation and fat synthesis were determined using Western blot analysis. Lipid droplet formation in adipocytes was remarkably inhibited by HIE. In addition, treatment with 400 ㎍/ml of HIE significantly reduced the expression levels of peroxisome proliferator-activated receptor γ and CCAAT/enhancer-binding protein α-transcription factors involved in adipocyte differentiation. Therefore, the results of this study indicate that HIE is a potential anti-obesity agent because it inhibits adipocyte differentiation.

• Journal of Food Hygiene and Safety
• /
• v.36 no.6
• /
• pp.528-536
• /
• 2021

The purpose of the study was to investigate the content of sinigrin, an index component, in Brassica juncea extract and to evaluate the differentiation of lipocytes, inhibition of production of reactive oxygen species (ROS) and reduction of protein production by lipogenic factors (PPARγ, C/EBPα, aP2) in the processing of Brassica juncea extract and sinigrin in 3T3-L1 preadipocytes which induces Bisphenol A (BPA), an endocrine disrupting environmental hormone. From the investigation, the content of sinigrin in Brassica juncea extract, measured by HPLC, is found to be 21.27±0.2 mg/g. The XTT assay result on BPA-derived 3T3-L1 adipocytes shows there is no cytotoxicity found from 180 µM of sinigrin and 300 ㎍/mL of Brassica juncea extract. Moreover, both intracellular lipid accumulation and ROS production during differentiation of lipocyte are significantly reduced in cells processed with Brassica juncea extract and sinigrin. Lastly, it was also found that the production of transcription factors of lipocyte differentiation, PPARγ, C/EBPα and aP2, were found to be suppressed by the application of Brassica juncea extract and sinigrin. Such results reveals that Brassica juncea is effective in not only suppressing lipid accumulation in the environmental hormone bisphenol A-derived lipocyte, but also in reducing the ROS. The sinigrin-containing Brassica juncea is highly expected to be used in natural functional supplements that prevents the lipid metabolism disorders caused by BPA. There are necessities for additional clinical research and follow-up studies on the in vivo model to verify the relevant mechanisms.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_3
• /
• pp.925-938
• /
• 2022

Agricultural reservoirs are an important water resource nationwide and vulnerable to abnormal climate effects such as drought caused by climate change. Therefore, it is required enhanced management for appropriate operation. Although water-level tracking is necessary through continuous monitoring, it is challenging to measure and observe on-site due to practical problems. This study presents an objective comparison between multiple AI models for water-body extraction using radar images that have the advantages of wide coverage, and frequent revisit time. The proposed methods in this study used Sentinel-1 Synthetic Aperture Radar (SAR) images, and unlike common methods of water extraction based on optical images, they are suitable for long-term monitoring because they are less affected by the weather conditions. We built four AI models such as Support Vector Machine (SVM), Random Forest (RF), Artificial Neural Network (ANN), and Automated Machine Learning (AutoML) using drone images, sentinel-1 SAR and DSM data. There are total of 22 reservoirs of less than 1 million tons for the study, including small and medium-sized reservoirs with an effective storage capacity of less than 300,000 tons. 45 images from 22 reservoirs were used for model training and verification, and the results show that the AutoML model was 0.01 to 0.03 better in the water Intersection over Union (IoU) than the other three models, with Accuracy=0.92 and mIoU=0.81 in a test. As the result, AutoML performed as well as the classical machine learning methods and it is expected that the applicability of the water-body extraction technique by AutoML to monitor reservoirs automatically.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.3
• /
• pp.305-313
• /
• 2021

Purpose. The purpose of this pilot study is to evaluate the reliability and validity of the Korean version of the oral health impact profile (OHIP-EDENT K) for edentulous patients. Materials and methods. The study was conducted on 12 patients who fabricated overdenture in the Department of Prosthodontics, Korea University, Guro Hospital. All subjects completed the Korean version of Oral Health Impact Profile (OHIP K) questionnaire. Shorten version of the OHIP called OHIP-14 K and OHIP-EDENT K were derived from the datasets. Cronbach's alpha was used to measure internal consistency of the summary scores for OHIP-EDENT K. The Spearman's correlation coefficient between the summary scores for OHIP-EDENT K and OHIP K was calculated to evaluate concurrent validity. Results. The reliability of the summary scores for OHIP-EDENT K was acceptable (α=.736). The Spearman's correlation coefficient of the summary scores for OHIP-EDENT K and OHIP K was 0.966, which was statistically significant (P<.001). OHIP-EDENT K exhibited less susceptibility to floor effects than OHIP-14 K and appeared to measure change as effectively as OHIP K. In order to prove the reliability, responsiveness and validity of OHIP-EDENT K, further studies with more samples are needed. Conclusion. The OHIP-EDENT K, a questionnaire on oral health-related QOL comprising 19 items, has measurement properties comparable with the full 49-item version. This modified shortened version can be an alternative questionnaire to full version of OHIP K and OHIP-14 K in edentulous patients.

• Journal of Life Science
• /
• v.32 no.11
• /
• pp.872-881
• /
• 2022

In this study, we optimized the composition of the indole-3-acetic acid (IAA) production medium using response surface methodology on Pantoea agglomerans SRCM 119864 isolated from soil. IAA-producing P. aglomerans SRCM 119864 was identified by 16S rRNA gene sequencing. There are 11 intermediate components known to affect IAA production, hence the effect of each component on IAA production was investigated using a Plackett-Burman design (PBD). Based on the PBD, sucrose, tryptone, and sodium chloride were selected as the main factors that enhanced the IAA production at optimal L-tryptophan concentration. The predicted maximum IAA production (64.34 mg/l) was obtained for a concentration of sucrose of 13.38 g/l, of tryptone of 18.34 g/l, of sodium chloride of 9.71 g/l, and of L-tryptophan of 6.25 g/l using a the hybrid design experimental model. In the experiment, the nutrient broth medium supplemented with 0.1% L-tryptophan as the basal medium produced 45.24 mg/l of IAA, whereas the optimized medium produced 65.40 mg/l of IAA, resulting in a 44.56% increase in efficiency. It was confirmed that the IAA production of the designed optimal composition medium was very similar to the predicted IAA production. The statistical significance and suitability of the experimental model were verified through analysis of variance (ANOVA). Therefore, in this study, we determined the optimal growth medium concentration for the maximum production of IAA, which can contribute to sustainable agriculture and increase crop yield.

• Journal of The Korean Association For Science Education
• /
• v.42 no.3
• /
• pp.371-381
• /
• 2022

This study causally investigates whether high school student with high science learning motivation becomes to achieve more or vice versa, and also how those two factors affect STEM career motivation. Research participants were 1st year students in a high school at Seoul. We surveyed their science learning motivation three times in the same time interval in the fall semester of 2021, and once a STEM career motivation in the third period. We collected data from 171 students with their mid-term and final exam scores, with which, we constructed and fitted an autoregressive cross-lagged model. The research model shows high measurement stability and fit indices. All the autoregressive and cross-lagged paths were statistically significant. However, standardized regression coefficients were larger in path from motivation to achievement compared to the opposite. Only science learning motivation shows significant direct effect on STEM career motivation, rather than achievement. For indirect effects, the first science learning motivation affected the final exam score and STEM career motivation, and the final exam score affected STEM career motivation. However, the final exam score did not have a total effect toward STEM career motivation. The result of this study shows reciprocal and cyclic causality between science learning motivation and achievement - in comparison, the effect of motivation for the opposite is larger than that of achievement. Also the result of this study strongly reaffirms the importance of science learning motivation. Instructional implications for strengthening science learning motivation throughout a semester was discussed, and a study for the longitudinal effect of science learning motivation and achievement in high school student toward future STEM vocational life was suggested.

• Journal of Korea Water Resources Association
• /
• v.55 no.6
• /
• pp.393-404
• /
• 2022

Reliable terrestrial rainfall observations from satellites at finer spatial resolution are essential for urban hydrological and microscale agricultural demands. Although various traditional "top-down" approach-based satellite rainfall products were widely used, they are limited in spatial resolution. This study aims to assess the potential of a novel "bottom-up" approach for rainfall estimation, the parameterized SM2RAIN model, applied to the C-band SAR Sentinel-1 satellite data (SM2RAIN-S1), to generate high-spatial-resolution terrestrial rainfall estimates (0.01° grid/6-day) over Central South Korea. Its performance was evaluated for both spatial and temporal variability using the respective rainfall data from a conventional reanalysis product and rain gauge network for a 1-year period over two different sub-regions in Central South Korea-the mixed forest-dominated, middle sub-region and cropland-dominated, west coast sub-region. Evaluation results indicated that the SM2RAIN-S1 product can capture general rainfall patterns in Central South Korea, and hold potential for high-spatial-resolution rainfall measurement over the local scale with different land covers, while less biased rainfall estimates against rain gauge observations were provided. Moreover, the SM2RAIN-S1 rainfall product was better in mixed forests considering the Pearson's correlation coefficient (R = 0.69), implying the suitability of 6-day SM2RAIN-S1 data in capturing the temporal dynamics of soil moisture and rainfall in mixed forests. However, in terms of RMSE and Bias, better performance was obtained with the SM2RAIN-S1 rainfall product over croplands rather than mixed forests, indicating that larger errors induced by high evapotranspiration losses (especially in mixed forests) need to be included in further improvement of the SM2RAIN.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.7
• /
• pp.225-233
• /
• 2021

This study quantitatively compares and analyzes lower extremity muscle activity and motor neurons by performing blood flow-restricting aerobic training in the lower extremities, which is closely related to aerobic capacity for health, in normal people, and provides basic data to suggest the effectiveness of an effective blood-restricting exercise program. would like to provide A group of 10 people who applied aerobic exercise on a treadmill by restricting blood flow to 140 mmHg of pressure was set as Experimental Group I. And 11 people who applied only aerobic exercise on a treadmill were randomly assigned as a control group. The intervention program was implemented on a treadmill for 4 weeks, 3 times a week, once a day, for 30 minutes once. In addition, muscle activity and motor neurons were measured and analyzed using surface electromyography before intervention. As a result of the study, the muscle activity of the rectus femoris, biceps femoris, tibialis anterior and gastrocnemius was significantly increased (p<.001) in the pre-and-poster comparison within the group of experimental group I (p<.001). In the pre-and-poster comparison of the control group, the muscle activity of the rectus femoris, biceps femoris, tibialis anterior and gastrocnemius was significantly increased (p<.001). In comparison of changes between groups, there was a significant difference in the activity of the rectus femoris muscle (p<.05). Combining aerobic exercise in parallel with lower extremity blood flow restriction can be developed into an injury prevention exercise program that can restore functional activity in rehabilitation training for elite athletes and elderly people with weak joints. In addition, based on these results in future research, it is considered that it is necessary to expand the scope of non-normal subjects and conduct various studies according to the pressure intensity.