• Title/Summary/Keyword: 측정허용기준

Search Result 302, Processing Time 0.026 seconds

Study of Blast Ground Vibration & Noise Measurements In-situ and Effect Analysis for Numerical Analysis, Rational Blasting Design at an Eel Farm (양만장의 발파 진동소음 현장측정과 수치해석을 통한 영향검토 및 합리적인 발파설계 연구)

  • Lee Song;Kim Sung-Ku;Rhee Yong-Ho
    • Tunnel and Underground Space
    • /
    • v.16 no.2 s.61
    • /
    • pp.179-188
    • /
    • 2006
  • The vibration or/and noise generated by blast operations might cause not only structural damage to properties but mentally also to humans and animals. For that reason, maximum permitted vibration and noise levels are set by sensitivities of structures and they are used for the management of blast vibration. It is known that the fish lived in water are more sensitive to vibration than land animals, and thus the adverse impact of the blasting on fish farms should be very concerned. This study investigated the vibration and noise levels at a large eel farm located some 840 meters of the blasting site through the large real-scale experiments of blastings, prior to conducting the actual blasting. As a result, it was found that the noise met the requirement to be within maximum permitted level, while the ground vibration exceeded the permitted vibration. Accordingly, the impact of the excess vibration was investigated by an existing empirical method and verified by a new three dimensional numerical analysis. In this study, such an inspection process was briefly described, and a method was suggested for the examination of possible adverse effects from blasting on vibration-sensitive structures like the eel farm. The study also introduced a design method that controls the blast effects - ground vibration and noise.

Measurement of Environmental Radiation Using Medical Scintillation Detector in Well Counter System (의료용 우물형 섬광계수기를 이용한 환경 방사선 측정)

  • Lyu, Kwang Yeul;Park, Yeon-joon;Kim, Min-jeong;Ham, Eun-hye;Yoon, Ji-yeol;Kim, Hyun-jin;Min, Jung Hwan;Park, Hoon-Hee
    • Journal of radiological science and technology
    • /
    • v.38 no.4
    • /
    • pp.337-345
    • /
    • 2015
  • After the Fukushima nuclear accident in 2011, concerns about radiation by people are increasing rapidly. If people could know how much they will be exposed by radiation, it may help them avoiding it and understand what exactly radiation is. By doing this, we were helping to reduce the anxiety of radiation contamination. In this study, we have researched figures of radioactivity with 'Captus-3000 thyroid uptake measurement systems' in well counter detector system. The materials were measured with Briquette, Shiitake, Pollock, Button type battery, Alkaline battery, Topsoil, Asphalt, Gasoline, Milk powder, Pine, Basalt stone, Pencil lead, Wasabi, Coarse salt, Tuna(can) Cigar, Beer, and then we categorized those samples into Land resources, Water resources, Foodstuff and Etc (Beer classified as a water resources has been categorized into Foodstuff). Also, we selected the standard radiation source linear 137Cs to measure the sensitivity of well counter detector. After that, we took cpm(counter per minute) for the well counter detector of thyroid uptake system's sensitivity. Then we compared the results of each material's cpm and converted those results to Bq/kg unit. There were a little limitation with the measurement equipment because it has less sensitivity than other professional equipment like 'High purity germanium radiation detector'. Moreover, We didn't have many choices to decide the materials. As a result, there are macroscopic differences among the rates of material's spectrum. Therefore, it had meaningful results that showed how much each material had emitted radiation. To compare the material's cpm with BKG, we've compounded their spectrums. By doing that, we were able to detect some differences among the spectrums at specific peak section. Lastly, Button type battery, Alkaline Battery, Briquette, Asphalt and Topsoil showed high value. There were classified emitting high radiation Group A and emitted lower radiation Group B. The Group A, alkaline battery showed higher rate of radiation by 7.67 %, and Button type battery was yield 4.65 % higher rate than BKG. Additionally, Asphalt (8.03 %), Topsoil (3.76 %), Briquette (7.46 %) were yield for higher values. Several samples of the daily supplies were yield little higher, but it seems safe to use in daily lives. In the case of the 'Foodstuff', all of the samples were safe and they were under the radiation limits of the Ministry of Food and Drug Safety for Food; thus, we highly recommend this study to you as a reference of common daily routine.

Stereo-video Synchronization for 3D Video Transmission (3차원 비디오 전송을 위한 스테레오비디오 동기화 방법)

  • Lee, Dong-Jin;Lee, Seon-Oh;Sim, Dong-Gyu;Lee, Hyuk-Joon
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.34 no.4B
    • /
    • pp.349-359
    • /
    • 2009
  • In this paper, we propose a stereo-video transmission method for reduction of delay and maximization of 3D effect. Conventional multimedia synchronization algorithms were designed to achieve minimum delay and synchronize multiple video and audio streams, however, they could not be effective for 3D video transmission. In this paper, we proposed a synchronization algorithm by considering the minimum error of time difference between streams for 3D effect. The minimum error of time difference for 3D effect was derived based on a 3D subjective quality test. We compute display time of the delivered videos within the allowed time-difference and the video are displayed according to the display time. To evaluate the performance of the proposed algorithm, we implemented a real-time video communication system and subjective quality test has been conducted with the proposed system. We found that video quality displayed by the proposed system. We found that video quality displayed by the proposed algorithm ranks 'good' and 'excellent' in the DMOS (Differential Mean Opinion Score) scale, based on the MOS (Mean Opinion Score) test.

A Study on Warrant Rearrangement Using Efficiency Analysis of Reversible Lane (가변차로제 효율성분석을 통한 설치기준 재설정에 관한 연구)

  • Oh, Sei-Chang;Choi, Bo-Hyuk
    • Journal of Korean Society of Transportation
    • /
    • v.22 no.1 s.72
    • /
    • pp.7-18
    • /
    • 2004
  • To solve the urban traffic congestion problem, Seoul and other major cities have operated the reversible lanes as Transportation Systems Manage-ment(TSM) method since 1981. However, few studies have been conducted to measure the effectiveness of reversible lane implementation and operation, and the reversible lanes have been implemented based on the experiential warrants rather than the study-based warrants. In this Paper the effect of reversible lanes operation has been analyzed by using the average delay and the fuel consumption. Four factors such as in and out flow of directional v/c, the ratio of directional volume, the number of reversible lanes and left-turn treatment(prohibition of LTs or protected LTs) were used to estimate the implementation effect of reversible lane operation by using TRANSYT-7F simulation package. In the case of six-lane urban arterial, the lower ratio of directional volume was found to warrant the reversible lanes when the simulation-based method was applied compared with the current experiential warrants.

Survey of radioactive contamination in imported foodstuffs (수입 식품중의 방사능 오염실태 조사)

  • Lee, Wan-No;Lee, Haeng-Pil;Chung, Kun-Ho;Kim, Hee-Reyoung;Cho, Young-Hyun;Choi, Geun-Sik;Lee, Chang-Woo;Chung, Hyung-Wook;Lee, Eun-Ju;Sho, You-Sup;Lee, Jong-Ok
    • Journal of Radiation Protection and Research
    • /
    • v.31 no.3
    • /
    • pp.141-148
    • /
    • 2006
  • Surveys of radioactive contamination were performed for imported foodstuffs in 2003. The following samples among imported foodstuffs were selected from markets and Korea Food and Drug Administration(KFDA); the imported samples from country associated with the Chernobyl nuclear accident, the samples produced around the nuclear power plants or nuclear tests, the foodstuffs reported as radioacitive contamination materials in foreign country. After pretreatments such as drying and homogenization, samples were analyzed. The $^{137}Cs$ radionuclide was only measured among the regulation radionuclides($^{137}Cs,\;^{134}Cs,\;^{131}I$) of food code. All foodstuffs except Inonotus Obliquus(Chaga mushooms) are less than 17.0 Bq/kg or below the minimum detectable activity(MDA). The activity concentrations of Chaga mushrooms from Russia ranged up to 131.25 Bq/ltg which is almost 35 % of the maximum permitted level of food code. The fraction of imported foodstuffs having meaningful radioactivity is small, however, the radioactive contamination survey of imported foodstuffs is still needed.

An Investigation on Influence of Vibration Noise in Cooling Tower on Precision Equipments (산업용 냉각탑의 진동소음이 정밀장비에 미치는 영향에 대한 연구)

  • Lee, Jin-Kab
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.17 no.9
    • /
    • pp.369-374
    • /
    • 2016
  • Cooling towers have been installed on rooftops or outside of buildings and widely applied to control the indoor temperature in residential areas and buildings. However, the noise and vibration resulting from their operation may cause problems in adjacent buildings. The purpose of this study is to measure the noise and vibration of an industrial cooling tower located adjacent to industrial plants and to investigate its influence on the surroundings according to an authorized evaluation standard. Further, in order to measure the effect of the vibration of the tower on the precision equipment inside the plant, an experiment is conducted to measure the vibration of the ground in the plant and the targeted precision equipment. The measurement results indicate that the noise in the cooling tower is 4 to 9 dB(A) higher than the maximum level defined in the standard of 68dB(A). The effect of the vibration of the tower on the precision equipment is comparatively minimal, because that in the supporting frame of the building is weaker than that on the floor where the precision equipment is located. The vibration of the floor on.

A Study on the Capacity Estimation of Electric Power Facilities in Inverter Elevators (인버터 승강기의 전원설비용량 산정에 관한 연구)

  • 김정태;이기홍;홍규장
    • The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.8 no.3
    • /
    • pp.80-87
    • /
    • 1994
  • 인버터 승강기의 전원설비, 즉 간선굵기와 변압기 용량의 설계 기준을 정립하기 위하여, 국내 승강기업체에서 고층 아파트와 빌딩에 설치한 인버터 승강기를 대상으로 전원설비 용량산정이 기준이 되는 가속전류와 전부하상승전류를 측정하고 분석하였다. 그 결과, 가속전류는 각 업체에서 제시하는 값에 비해 작아졌으나 전부하상전류는 국내 승강기 업체의 기술수준의 미흡으로 인해 크게 나타났다. 이에 따라, 전선의 길이가 100m이상인 경우에는 허용전압강하에 의한 계산이 유효하게 되어 전선의 단면적을 한단계 줄일 수 있고, 변압기 용량은 각 사의 제시값에 비해 속도 60m/min의 경우에는 1∼4[kVA]정도, 90m/min인 경우에는 3∼5[kVA]정도 커지게 된다.

  • PDF

Comprehensive Vibration Assessment Program Measurement Test Plan for Advanced Power Reactor 1400 (신형경수로 1400 종합진동평가프로그램 측정시험 계획)

  • Ko, Do-Young;Kim, Kyu-Hyung
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2013.04a
    • /
    • pp.589-595
    • /
    • 2013
  • A reactor vessel internals comprehensive vibration assessment program(RVI CVAP) of an advanced power reactor 1400(APR1400) is being verified on the integrity of RVI for the design life of the plant by performing the non-prototype category-2 type on the US Nuclear Regulatory Commission Guide(NRC RG) 1.20, for which consists of a vibration and stress analysis program, a limited vibration measurement program, an inspection program, and the correlation of these programs. The aim of this paper is to describe the plan for the vibration measurement, test and acceptance criteria portion, and documentation and results of the APR1400 RVI CVAP. We will conduct the limited vibration measurement program of the APR1400 RVI CVAP according to the measurement plan and the vibration measurement testing in this paper.

  • PDF

Establishment of Pre-Harvest Residue Limit for Pyrimethanil and Methoxyfenozide during Cultivation of grape (포도(Vitis vinifera L.) 중 Pyrimethanil 및 Methoxyfenozide의 생산단계 잔류허용기준 설정)

  • Kim, Ji Yoon;Woo, Min Ji;Hur, Kyung Jin;Manoharan, Saravanan;Kwon, Chan-Hyeok;Hur, Jang Hyun
    • The Korean Journal of Pesticide Science
    • /
    • v.19 no.2
    • /
    • pp.81-87
    • /
    • 2015
  • The present study was aimed to predict the pre-harvest residue limits (PHRLs) of pyrimethanil (fungicide) and methoxyfenozide (insecticide) in grape, and to estimate their biological half-lives and residual characteristics. The pesticides were sprayed once on grape in two different fields 10 days before harvest. At the end of 0, 1, 2, 3, 5, 7 and 10 days after application, samples were harvested for further analysis. The residual pesticides were extracted with acetonitrile and partitioned with dichloromethane, and the high-performance liquid chromatography with diode array detector (HPLC/DAD) was employed for the residue analysis. The results obtained in the present study show that the limit of detection of both pesticides were found to be $0.01mg\;kg^{-1}$. The recoveries of these pesticides were ranged between 80.6% and 102.5% with coefficient of variation lower than 10%. The biological half-lives of both pesticides were observed in field 1 and field 2 which shows 7.7 and 7.4 days for pyrimethanil and 5.1 and 6.1 days for methoxyfenozide, respectively. Further, the PHRL of pyrimethanil and methoxyfenozide was found to be $8.90mg\;kg^{-1}$ and $5.51mg\;kg^{-1}$, respectively at 10 days before harvest. Consequently, the present study suggests that the residual amounts of both pesticides will be lower than the maximum residue limits (MRLs) when grape is harvested.

Study on the Safety of the Grounding Rods in the Distribution System (IEEE Std 80에 따른 배전용 접지동봉의 안전성 검토)

  • Kang, Moon-Ho;Lee, Heung-Ho
    • Proceedings of the KIEE Conference
    • /
    • 2006.07a
    • /
    • pp.470-471
    • /
    • 2006
  • 다중 접지 배전계통에서 발생하는 이상전압으로부터 전력설비의 안정적인 운영과 인체안전을 위해 주로 봉상 접지전극을 이용하여 대지방전경로를 구성하고 있다. 그리고 접지종류별로 접지 저항값을 규정하고 이를 시공에 적용하고 있다. 지락고장이 발생하면 접지전극으로 유입되는 고장전류에 비례하여 대지전위가 상승하기 때문에 이에 대한 인체 안전성측정 및 검토가 필요하다. 따라서 본 논문에서는 IEEE Std 80에서 제시하는 안전성 기준에 기초하여 다중 접지 배전계통에서 접지전극으로 널리 사용되는 봉상 접지전극을 대상으로 상용주파전류를 인가하여 대지전위상승에 따른 접촉전압을 측정하였으며, CDEGS 프로그램을 이용하여 보폭전압을 모의하였다. 또한 이 값을 IEEE Std 80에서 제시하는 최대 허용 보폭전압과 접촉전압과 비교하여 인체 안전성을 검토하였다.

  • PDF