• Journal of Environmental Science International
• /
• v.6 no.4
• /
• pp.391-397
• /
• 1997

The study was carried out to demonstrate the superiority of used packing in view of energy saving and efficiency of mass transfer, comparing with conventional packing. The results are as follows : 1. Owing to low Pressure drop under high load. 25mm NSW-ring, pp. can cause energy saving 2. The unique magnitudes of used packing are as follows $C_G$=5.78, m=0.67, n=0.46 3. Used packing can make high efficiency including energy saving because of low pres sure drop per the number of transfer unit. To rate the characteristic of packing, It should be carried out that the measurement of pressure drop per packing height and per the number of transfer unfit. This study demonstrated the superiority of used packing by carring out above experiment and could be used as basic reference for design and predicting efficiency of packing tower which is tilled with same packing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1078-1085
• /
• 2006

In earthing technologies, the intrusion of the surge wave can be protected when the earthing resistance is as low as several ohms. However, the cost fer realizing such a low resistance is quite high. Therefore it is important to determine appropriate target value of the earthing resistance to install cost-effective grounding system. In this work, we have proposed an optimization method of the earthing resistance according to the various environmental parameters by using a numerical simulator We have also developed new catalyst composed of water-soluble alkaline elements and activated carbon and investigated its electrical characteristics for enhancement of the earthing qualities.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1993.11a
• /
• pp.58-59
• /
• 1993

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2005.04a
• /
• pp.89-92
• /
• 2005

• Proceedings of the Korean Magnestics Society Conference
• /
• 1991.11a
• /
• pp.68-69
• /
• 1991

• Proceedings of the Korean Magnestics Society Conference
• /
• 2001.10a
• /
• pp.30-31
• /
• 2001

• Proceedings of the Korean Magnestics Society Conference
• /
• 1995.05a
• /
• pp.64-65
• /
• 1995

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1994.06b
• /
• pp.35-48
• /
• 1994

본 연구는 윤활시스템용 오일필터로서 개발된 자성폴리머 필터의 충진밀도에 따른 여과특성을 조사하기 위해 유속, 여과시간 및 자성유무 등의 변수를 변화시키면서 실험실적 방법으로 행해졌으며 다음과 같은 결과는 얻었다. 1. 자성폴리머 필터의 충진밀도가 증가함에 따라 여과효율 및 압력손실은 증가하는 경향을 나타내고 있으며, 이는 자성폴리머 필터의 기공 및 자성에 그 원인이 있다. 2. 자화 및 비자화된 자성폴리머 필터의 압력손실은 동일한 경향을 나타내고 있으나 여과효율은 현저한 차이를 나타내었다. 이는 자성의 영향에 의존함을 알 수 있다. 3. 자성폴리머 필터는 기존의 종이 필터보다 우수한 여과특성을 나타내고 있으며, 이는 다른 여과 메카니즘에 기인한다. 즉 종이 필터는 단지 기공에만 의존하는 표면여과방식인 반면 자성폴리머 필터는 기공(Porosity)과 자력(Magnetic Attration)의 기능을 지닌 심층여과 필터와 자성필터의 두기능을 지니기 때문이다. 따라서 개발된 자성폴리머 필터는 실제 윤활시스템에 적용시 매우 효과적인 오일필터로 작용 할 것으로 사료된다.

• Membrane Journal
• /
• v.26 no.1
• /
• pp.43-54
• /
• 2016

In this study, we have prepared engineering polymer-based ionomers and pore-filled ion-exchange membranes (PFIEMs) employing a porous polyethylene substrate and combined them to fabricate the ionomer-PFIEM composite membranes for the reverse electrodialysis (RED) application. Both the electrochemical properties comparable to those of the commercial ion-exchange membranes (AMX/CMX, Astom Corp., Japan) and the physical stability adaptable to the practical uses have been achieved by integrating the ionomers having a high ion conductivity and the PFIEMs with an excellent mechanical strength. The RED performances have been evaluated by employing the prepared ionomer-PFIEM composite membranes and therefore excellent power generation performances were shown as the levels of 86.4% and 104.8% for the anion-exchange membrane and cation-exchange membrane, respectively, compared with those of the commercial membranes.

• Membrane Journal
• /
• v.27 no.5
• /
• pp.406-414
• /
• 2017

In this study, we have developed pore-filled ion-exchange membranes (PFIEMs) filled with ionomer in a thin polyethylene porous film (thickness = $25{\mu}m$) and investigated the charge-discharge characteristics of the all vanadium redox flow battery (VRFB) employing them. Especially, the degree of crosslinking and free volume of the PFIEMs were appropriately controlled to produce ion-exchange membranes exhibiting both the low membrane resistance and low vanadium permeability by mixing crosslinking agents having different molecular size. As a result, the prepared PFIEMs exhibited excellent electrochemical properties which are comparable to those of the commercial membranes. Also, it was confirmed through the experiments of vanadium ion permeability and VRFB performance evaluation that the PFIEMs showed low vanadium ion permeability and high charge-discharge efficiency in comparison with the commercial membrane despite their thin film thickness.