• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.62-62
• /
• 1998

다이아몬드상 카본은 경도, 열전도 둥이 다이아몬드와 비슷하면서도 박막 성장이 쉬워 다른 재료의 표면보호용 코탱막으로 웅용되고 있다. 최근에 다이아몬드상 카본 박막의 이러한 특성은 전계방출 음극 소자가 이온 충돌, 온도 상승에 의해 마모되는 것을 방지 하는데도 용용되고 있다. 이러한 보호막 기능뿐만 다이아몬드상 카본 박막용 편평한 기 판에 성장시켜 평판 전계방출 음극으로 이용하는 것도 시도되고 었다. 본 연구에서는 이 온빔 스퍼트링 방법으로 다이아몬드상 카본 박막을 성장시켰다. 합성하기 전 챔버의 기 본 압력은 3.2 X 10-7 Torr이었다. 기판으로는 타이타니움 평판, n-타엽의 실리콘 평판, I ITO가 코탱된 유리 평판올 사용하였으며, 중착 전에 기판올 400 V, 15 mA의 알곤 이온 으로 1분간 스퍼트링하여 불순물 막을 제거하였다. 박막 합성시에는 챔버 압력이 3.5 x 1 10-4 To$\pi$가 될 때까지 알곤을 채우고 알곤빔 전류는 30 mA에 고정시키고 빔 에너지를 각각 750, 1000, 1250 eV로 바꾸면서 타켓올 스퍼트랭하였다. 질소를 다이아몬드상 카본 박막애 첨가하면 n-타업 불순물 주입 효과가 있게된다. 질소가 첨가된 박막을 만들기 위 해서는 별도의 이온 총올 사용하여 탄소 타켓 스퍼트령과 동시에 기판에 질소 이온을 입 사시켰다. 만들어진 시료로부터 3 X 10-7 To$\pi$ 진공에서 전류-전압 특성올 조사하였다. 양극으로는 면평한 금속판올 음극 위 150 11m 높이에 셜치하였다. 박막의 물성은 전자 현미경, 오제 전자분광 둥으로 조사하였다. 다이아몬드상 카본 박막을 다른 종류의 편명 한 기판에 합성 조건올 바꾸면서 성장시켜 박악의 특성파 기판이 전계방출에 미치는 영 향을 조사하였다. 합성된 다이아몬드상 카본필름의 전자방출 특성은 기판의 종류와 필름 의 구조 및 필름의 두께에 따라 크게 변화하였다. 이러한 전자방출 거동으로부터 전계 방출 메커니즘을 제시하고자 하였다. 또한, 다이아몬드상 카본 박막으로부터의 전계방출 은 전기장올 인가하는 방법에도 영향을 받는다. 따라서, 본 연구에서는 전기장올 순환 인 가하면서 전계방출 전후의 박막 특성 변화를 조사하여 전계방출 메커니즘올 연구하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.99-107
• /
• 2014

Abruptly occurred obstacles on highway threaten driving safety. Radar draws the attention to the collision avoidance system because it can be fully operational in all weather, and day and night condition. This paper presents the design, implementation and performance test results of pulsed Doppler radar system for detection and warning of road obstacles. The system is designed to consider highway environment and detection capability about various fixed and moving obstacles. The system consists of 4 subsystems, which include antenna unit, transmitter and receiver unit, radar signal & data processing unit, and controller & display unit. The core technologies include clutter map based change detection for fixed obstacles detection, Doppler estimation for velocity detection of moving targets, and azimuth angle estimation method using monopulse for lane estimation and tracking. The design performance of the developed radar system is verified through experiments using a fixed reference target and moving vehicles in test highway.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7B
• /
• pp.518-527
• /
• 2008

Tag collection is one of the major functions in Radio Frequency Identification (RFID) systems. IS0/IEC 18000-7 defines the tag collection algorithm using the anti-collision algorithm, based on the framed slotted ALOHA for active RFID systems. However, it has inefficiency problems that reduce tag collection performance by deciding non-optimum slot size or using point-to-point commands to put collected tags to sleep. In this paper, we propose two mechanisms to overcome the inefficiency problems and improve tag collection performance: 1) a new slot size decision mechanism to allow the reader to choose the optimum slot size flexibly and 2) a broadcast-based sleep mechanism to put collected tags to sleep effectively. We also implemented an active RFID system, composed of an active RFID reader and multiple tags, and the reader is designed to maximize tag collection performance when the proposed mechanisms are applied. In experiments, we evaluated the tag collection performance using one reader and 50 tags in the real-world environment. The experimental results show that when two mechanisms are applied and the initial number of slots is chosen appropriately, the performance of the proposed tag collection algorithm is greatly enhanced, compared with that of the standard.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.360-367
• /
• 2006

In this paper, we designed a digital codec of an RFID tag for EPC global generation 2 class 1. There are a large number of studies on RRD standard and anti-collision algorithm but few studies on the design of digital parts of the RFID tag itself. For this reason, we studied and designed the digital codec hardware for EPC global generation 2 class 1 tag. The purpose of this paper is not to improve former studies but to present the hardware architecture, an estimation of hardware size and power consumption of digital part of the RFID tag. Results are synthesized using Synopsys with a 0.35um standard cell library. The hardware size is estimated to be 111640 equivalent inverters and dynamic power is estimated to be 10.4uW. It can be improved through full-custom design, but we designed using a standard cell library because it is faster and more efficient in the verification and the estimation of the design.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2088-2096
• /
• 2009

This paper deals with hybrid MAC protocol design for underwater acoustic networks. The proposed MAC protocol has the cluster structure with a master node and slave nodes, and the hybrid network structure that combines a contention free period based on TDMA(Time Division Multiple Access) with a contention period. The suggested MAC protocol has a beacon packet for supervising network, a guard period between time slots for packet collision, time tag for estimation of propagation delay with a master node, the time synchronization of nodes, entering and leaving of network, and the communication method among nodes. In this paper, we adapt the proposed hybrid MAC protocol to AUV network, that is the representative mobile device of underwater acoustic network, and verify this protocol is applicable in real underwater acoustic network environment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.179-179
• /
• 2006

산업기술의 고도화에 따른 IT 산업의 급속한 발전으로 각종 전자, 정보통신기기에 대해 더욱 소형화 고성능화를 요구하고 있다. 이와 같은 경향에 따라 더욱 향상된 기능을 가지고 각종 소자 부품의 개발과 동시에 유독 물질 발생이 없는 청정생산기술 개발에 대한 요구가 끊임없이 제기 되어 왔다. 이러한 요구에 부응하여 기술들이 개발되고 있으며 그 중의 하나로 잉크젯 프린팅 기술이 연구되고 있다. 특히 Dod(Drop on Demand) 방식의 잉크젯은 가정용 프린터로 개발되어 널리 보급된 기술이지만, 이 기술을 PCB 제조기술에 전용하면 친환경 생산공정으로 부품 성장밀도를 증대 시킬 수 있다. 기존의 PCB 제조기술은 전극과 신호 패턴을 형성시키기 위하여 노광공정과 에칭공정을 반복적으로 사용하고 있는데, 노광공정에서 쓰이는 마스크와 유틸리티 설비 유지 비용의 문제가 대두되고 있다. 노즐로부터 분사된 잉크 액적들의 집합으로 기판위에 점/선/면의 인쇄이미지를 구현하게 된다. 그러므로 인쇄 해상도는 잉크액적 및 인쇄 방법, 기판과의 상호작용에 크게 의존하게 된다. 잉크 액적과 기판의 상호작용에 영향을 미치는 요소로는 잉크의 물리화학적 물성(밀도, 점도, 표면장력), 잉크 액적의 충돌 조건(액적 지름, 부피, 속도), 그리고 기판의 특성(친수/소수성, Porous/Nonporous, 표면조도 등)을 들 수 있겠다. 우선적으로 노즐을 통과해서 분사되는 액적의 크기에 따라 기판위에 형성되는 라인의 두께 및 폭이 결정된다. 떨어진 액적이 기판위에서 퍼지는 것을 UV 조사를 통한 가경화 과정을 통해서 최종적으로 라인의 투께 및 폭을 조절하려고 한다. 따라서 선폭 $75{\mu}m$의 일정한 미세 배선을 형성시키기 위해 액적 크기 조절과 탄착 resist 액적 표면의 UV 가경화 조건으로 구현하려고 한다. 또한 DPI(Dot Per Inch) 조절을 통한 인쇄로 탄착 resist의 두께 확보 후 에칭시 박리되는 현상을 억제 시키려 한다.

• Journal of Advanced Navigation Technology
• /
• v.19 no.2
• /
• pp.108-115
• /
• 2015

Multilateration systems are used to provide the position of aircraft in flight or on airport runways. In the multilateration systems, the interrogator is an important transmitter that used to interrogate the airplanes with appropriately scenario in surveillance airspace. Whisper-Shout interrogation sequence, which is one of the key functions of the interrogator, can control airport traffic density when intruder airplanes are coming into the surveillance airspace. Therefore collision chance between airplanes could be reduced and also get highly accurate location of incoming airplane in multilateration systems. In this paper, we developed the interrogator that allows it to transmit Mode A/C and Mode S interrogations which is similar to existing secondary surveillance radar. With appropriately controlled Whisper-Shout sequence in the interrogator, the multilateration systems can avoid synchronous garbling and FRUIT phenomenons caused by receiving multiple responses from a number of airplanes.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.32 no.6
• /
• pp.1171-1181
• /
• 2022

Front Collision-Avoidance Assist (FCA) or Smart Cruise Control (SCC) is installed in a modern vehicle, and the amount of data exchange between ECUs increases rapidly. Therefore, Automotive Ethernet, especially SOME/IP, which supports wide bandwidth and two-way communication, is widely adopted to overcome the bandwidth limitation of traditional CAN communication. SOME/IP is a standard protocol compatible with various automobile operating systems, and improves connectivity between components in the vehicle. However, no encryption or authentication process is defined in the SOME/IP protocol itself. Therefore, there is a need for a security study on the SOME/IP protocol. This paper proposes a deep learning-based intrusion detection system in SOME/IP and performs six attacks to confirm the performance of the intrusion detection system.

• Journal of the Korean Arthroscopy Society
• /
• v.6 no.2
• /
• pp.136-141
• /
• 2002

Purpose : The role of biceps pulley is stabilizing sling for the long head of the biceps tendon against anterior shearing stress in the rotator interval. The purpose of this study was to classify arthroscopic findings of biceps pulley and to evaluate the relationship with shoulder pathology. Materials and Methods : From January 2002 through July 2002, we observed biceps pulley in 49 cases of shoulder pathology treated with arthroscopically. There were 22 cases of anterior instability, 12 cases of rotator cuff tear, 5 of impingement syndrome, 6 of frozen shoulder, 2 of superior labral injury and 1 of each scapulothoracic bursitis and biceps dislocation. We classified biceps pulley as four types according to the arthroscopic appearance. Type I its stretched type. type II as sling type, type III at detached sling type, and type IV as concealed type. Results : We observed stretched type in 24 cases $(49\%)$, sling type in 5 cases $(10\%)$, detached sling type in 2 cases, concealed type in 1 case, and unidentified cases in 17 cases $(35\%)$. Conclusion : Development and variation of biceps pulley may have symptomatic correlation according to the degree of shoulder motion or pathologic status.

• Journal of the Korean Arthroscopy Society
• /
• v.13 no.1
• /
• pp.82-85
• /
• 2009

Purpose: In anterior cruciate ligament (ACL) reconstruction, preservation of the remnant original tissue might promote graft healing and be helpful in proprioception. But this procedure is difficult and causes the notch impingement. So we introduce a surgical technique that makes a transtibial femoral tunnel at 10 or 2 o'clock position with preservation of remnant tissue. Surgical approach: We tried to preserve the remnant tissue and synovium as much as possible, especially those of tibial attachment and extending to the posterior cruciate ligament (PCL), so as to have some tension and to prevent notch impingement. We set the tibial drill guide at 40~45 degrees and the intra-articular guide tip was 1 mm anterior and medial to the conventional site. The starting point of tibial guide pin was proximal to the pes anserinus and anterior to the medial collateral ligament. When the reamer approached the cortical bone of the tibial articular surface, the reamer must be advanced very carefully to minimize injury to the remnant tissue. The tibial and femoral tunnel at 10 or 2 o'clock position were made with the reamer, the diameter of which was same with that of the graft. Conclusion: We report a remnant preserving technique in ACL reconstruction that makes a transtibial femoral tunnel at 10 or 2 o'clock position