• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.6
• /
• pp.17-25
• /
• 2010

This paper studied on stability of the U-channel segmental concrete bridge under vehicle-impact loads. The U-channel bridge has advantages in that it reduces an additional dead load and the edge beams role as a barrier. But it has a dangerous factor which collapses the bridge structure when the edge beams are ruptured. Therefore, it is necessary to verify behaviors of the bridge system under vehicle-impact loads. Static and dynamic vehicle impact simulations were carried out on the basis of AASHTO LRFD design specifications. In case of the static analysis, equivalent static loads specified in the AASHTO codes are loaded on the edge beams and in case of the dynamic analysis, FEM vehicle models are modeled by applying the dynamic test specifications of AASHTO codes. As a result, it is shown that U-channel bridge system has sufficient safety against static and dynamic impact loads specified in the AASHTO LRFD design specifications.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.32-38
• /
• 2020

This study examined the problems of existing vehicles to propose alternatives to improve the crashworthiness of railway freight cars through collision acceleration analysis using a one-dimensional collision analysis method. A collision scenario of railway shunting and crash accidents was selected from the collision accident cases and international standards. A one-dimensional collision simulation using LS-DYNA was performed according to those scenarios. As a result, the acceleration level of the freight wagon was calculated to be under 2g and was predicted to meet the EN 12663 standard in the shunting situation. On the other hand, the result of crash simulation with an impact velocity between 10 and 15 km/h revealed the shock absorber capacity of the railway coupler to be insufficient in a crash situation, resulting in increased acceleration, and carbody deformation could be predicted. As a method of improving the crashworthiness, a deformation tube-type energy absorber was applied to the coupler system, and collision analysis was performed again with new energy absorption strategy. Overall, the simulation showed that the acceleration level was decreased by 12% of the conventional freight-car energy absorption system.

• Computational Structural Engineering
• /
• v.10 no.4
• /
• pp.12-21
• /
• 1997

차량충돌에 대하여 운전자의 안전확보를 위하여 새로 개발한 철재 중앙분리대에 대한 안전성 분석을 위하여 인체모형을 탑재한 실물차량 충돌실험을 실시하였다. 인체모형의 두부와 흉부, 대퇴부 및 차량의 무게중심점에서 가속도와 충격하중을 계측하여 철재 중앙분리대 방호울타리에 차량충돌시 운전자의 안전성을 검증한 결과 다음과 같은 결론을 도출하였다. 1) 철재 중앙분리대 방호울타리는 콘크리트 중앙분리대 방호울타리에 비해 운전자의 신체 상해치와 차량파괴 등에 있어서 뛰어난 충격흡수성능을 보여주었다. 2) 철재 중앙분리대 방호울타리는 콘크리트 중앙분리대 방호울타리의 경우 빈번히 발생하는 차량전복과 같은 2차사고의 유발 가능성이 전혀 없는 구조적 안정성을 보여주었다. 3) 경량의 차량충돌에 대하여 자체 탄성영역내에서 충격을 흡수하여 유지보수 측면에서 유리함을 나타냈다. 4) 충돌 수 충돌차량에 대한 차량유도성능이 뛰어났으며, 차량의 충돌후 이탈각도는 충돌각도의 60% 이내로 나타났다. 5) 철재 중앙분리대 방호울타리로부터 분리된 파편이 거의 없어 도로소통에 지장을 초래하지 않는다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.11a
• /
• pp.487-490
• /
• 2006

단일의 BRE를 사용하는 비즈니스 롤 시스템에 새로운 룰이 추가 또는 수정될 경우, 기존의 비즈니스 룰과 의미적인 충돌이 발생할 수 있으며, 이는 잘못된 비즈니스 수행결과를 초래하는 원인이 된다. 이를 위해 비즈니스 룰 시스템은 내부적으로 발생하는 비즈니스 룰 간의 충돌을 검출하고 해결할 수 있는 기능을 제공한다. 그러나 서로 다르게 구현된 다수의 BRE를 이용하는 분산 비즈니스 룰 시스템에서는 하나의 BRE에 추가된 새로운 비즈니스 룰이 다른 BRE의 룰과 충돌이 발생하는지 여부를 자동적으로 확인할 수 있는 방법이 제공되지 않아서, 사용자가 직접 모든 BRE에서 룰의 충돌 여부를 확인해야 하는 어려움을 가지고 있다. 기존의 분산 비즈니스 룰 시스템에 관한 연구에서도 서로 다른 BRE들을 분산 배치하고 비즈니스 룰을 실행하는 방법에 대한 연구만을 수행하였을 뿐, 분산된 비즈니스 룰 간의 충돌을 해결하는 것에 대한 연구는 미흡한 실정이다. 본 논문은 이러한 분산 비즈니스 룰 시스템에서 비즈니스 룰의 추가 및 변경 발생 시, 룰 간의 충돌을 검출하고 해결하기 위하여 기존 연구의 한계점을 분석하고 새로운 시스템 요구사항들을 도출하였다. 이를 기반으로 기존에 제시된 비즈니스 룰 브로커 구조를 확장, 보완한 분산 비즈니스 룰 충돌 검출 시스템의 아키텍처를 제안하고 이를 설계하였다.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.44.3-44.3
• /
• 2018

수성의 대기와 자기장은 매우 희박하여 그 표면이 우주 환경에 거의 그대로 노출되어있다. 표면의 토양은 태양풍입자와 미소유성체 등에 의해 계속해서 밝기가 어두워지고 입자의 크기도 작아진다. 이러한 현상을 종합적으로 '우주풍화'(space weathering)라고 부르는데, 그 정도를 정량화하거나 상대적으로 평가하는 데에는 어려움이 따른다. 왜냐하면 우주풍화의 정도에는 원인이 되는 입자의 입사 플럭스는 물론이고, 표면의 지역 조성비와 토양의 노화도 등이 모두 섞여 영향을 미치기 때문이다. 이를 극복하는 한 가지 방법은 수성 표면을 뒤덮고 있는 수많은 충돌구(impact crater) 내의 광학적 특성 분포를 통계적으로 분석하는 것이다. 충돌구 안쪽의 토양은 충돌 시점에 동시에 형성되었고, 그 성분이 충돌구 밖 임의의 지역에 비교해 상대적으로 균질하며, 지형적으로 충돌구 안팎의 경계가 분명하게 정해져 있다. 또한, 충돌구는 수성 전구(全球)에 걸쳐 어디에서나 발견되므로 각 충돌구의 특성을 경도 위도 연대 등 여러 측면에서 조사할 수 있다. 본 연구에서는, 메신저(MESSENGER) 탐사선의 MDIS 영상기에서 얻은 관측 자료를 활용하여 수성 충돌구의 광학적 특성에 대해 알아본다.

• Journal of Internet Computing and Services
• /
• v.12 no.5
• /
• pp.101-111
• /
• 2011

Most researches in WSN-based parking management system used wireless sensors to monitor the events in a car parking area. However, the problem of car collisions in car parks was not discussed by previous researches. The car position details over time are vital in analyzing a collision event. This paper proposes a collision verification method to detect and to analyze the collision event in the parking area, and then notifies car owners. The detection uses the information from motion sensors for comprehensive details of position and direction of a moving car, and the verification processes an object tracking technique with a fast OBB intersection test. The performance tests show that the location technique is more accurate with additional sensors and the OBB collision test is faster compared to a normal OBB intersection test.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.6
• /
• pp.634-639
• /
• 2014

This paper specifies a collision alarm using an infrared distance sensor that can identify the dangerousness of collision of active mobile robotic systems to various objects, such as unknown objects or another robots. And we analyse the major operating signals and features of the collision alarm for effective industrial applications. For the purpose, we consider a typical parking situation of a mobile robotic system with the collision alarm designed. As a result, it is shown that the proposed collision alarm is applicable for effective collision avoidance and safe driving of various mobile robots or vehicles.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.7
• /
• pp.555-563
• /
• 2012

In earth orbit, a great number of orbital debris move around in extremely high velocity, and they become serious threats to satellites. In this study, smoothed particle hydrodynamics(SPH) is used to analyze the damage of a low earth orbit satellite due to the hypervelocity impact with orbital debris. The damage of honeycomb sandwich panel(HC/SP) used for walls of a satellite is analyzed with respect to impact velocities. For the additional analysis to examine the safety of interior components of the satellite, an attached electronic box and an offset electronic box are considered. As a result of the analysis considering the orbital debris having a probability of collision more than 2% at altitude of 685km, it is shown that the HC/SP can be perforated but only small craters are formed on both the attached electronic box and the offset electronic box.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.402-408
• /
• 2021

Vehicle engineering analysis in the event of an accident caused by a car built on mechanical design has not been investigated in-depth but relies on the subjective experience knowledge of the investigator. This study analyzed the correlation between the speed, progress, steering, and braking before impact, which is consistent with the final stop position, by drawing a site situation chart using the CAD (CAD) program and repeating 250 crashes using the PC-Crash program. The following situations were investigated: lower impact velocity; greater impact speed of the vehicle, which is not affected significantly by the departure angle; higher vehicle speed, such as the effective impact velocity, after the impact; higher vehicle speed; and lower vehicle speed. (Ed note: I am unsure what you are saying here. It appears contradictory and not a complete sentence. Please check the changes.)The simulation results of this study identified the process of returning to the magnetic progression lane after recognizing the opposite porter while Mighty was carried out on the uphill left-curve section in a position that crossed the center line, and the collision of the porter's front left side, pushing the porter in the right diagonal direction and making the front stop towards approximately 11 o'clock.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.75-83
• /
• 2009

Collision behavior of clash cushion occurs for a second of less than 0.4sec usually so that it is too hard to calculate numerically. Therefore, for development of trash cushion, it rely on full-scale vehicle crash test without any design procedure. Occupant safety indices if calculated from acquired data by data measurement system and collision behavior of vehicle and crash cushion is filming using high-speed camera in the crash test. But practical ufo scope of high-speed camera is limited and it is not using to calculated the occupant safety indices or analyzed the energy dissipated mechanism of crash cushion. This work is to estimate to be suitable or not for compare the data from measurement system with the data from high-speed camera. And also it is to grope for practical use scheme to calculation of occupant safety indices or analysis of collision behavior.