• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.3
• /
• pp.48-52
• /
• 2011

This paper presents the observer based output feedback control design for linear systems which have both input and output time delay. Sufficient conditions for existence of stabilizing output feedback controller are characterized by linear matrix inequalities. Since the condition of the proposed design depends on the value of time delay, it is less conservative than existing delay-independent approaches. Finally, an illustrative example is given in order to show the effectiveness of our design method.

• Journal of IKEEE
• /
• v.21 no.2
• /
• pp.154-157
• /
• 2017

This paper proposes the Low-Dropout regulator with two output. Each of the two output has feedback, and shared feedback loop. PMOS is added to solve the problem the occur when sharing the feedback loop. Thus eased the Load Transient Response. Also Using one of the bias citcuit and one of the pass transistor, Area is reduce by half compared to Existing Area that used to obtain output of two output.

• Proceedings of the Optical Society of Korea Conference
• /
• 1995.06a
• /
• pp.149-153
• /
• 1995

세슘원자에 대한 레이저 쿨링용 광원으로 사용하기 위해 다이오드 레이저의 서폭을 축소하고 발진 주파수 및 출력을 동시에 안정화 시키는 연구를 수행하였다. 자유발진 상태에서 약 30 MHz 이고, 출력이 10mW인 다이오드 레이저에 유이창으로 Q 갑이 낮은 외부 공진기를 구성함으로써 발진선폭을 약 5MHz로 줄일수 있었다. 그리고 세슘원자의 포화흡수 스펙트럽의 교차공진 흡수선에 레이저 주파수를 안정시키기 위해 주입전류를 10kHz 로 변조하고, lock-in amp 의 출력단에서 나오는 주파수 오차신호를 전류공급장치와 유리창이 부착된 PZT로 동시에 피드백시켰다. 또한 오차신호를 레이저 다이오드의 온도 조절장치로 피드백 시킴으로써 주파수와 동시에 레이저 출력을 안정화시킬 수 있었다. 이 때의 출력의 변동폭은 약 0.03% 로서 온도로 피드백 시키지 않는 경우에 비해 약 260배 안정된 결과를 얻었다. 그리고 컴퓨터를 이용해서 흡수선의 peak 값을 매 10초마다 검색하고 이 값이 최대가 되도록 PZT 전압을 조절함으로써 레이저 주파수를 세슘원자의 흡수선의 봉우리에 1주일 이상 안정화시킬 수 있었다. 주파수 안정도 측정을 위해 Zeeman 이동된 포화흡수 스펙트로미터를 구성하였으며, 측정된 주파수 안정도 (Allan 분산의 제곱근)는 적분시간 1초 일 때 1.2x10-10 이었다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.2
• /
• pp.192-197
• /
• 2011

In this paper, the output feedback control of inverted pendulum systems is experimented for the practicality verification of the linear state observer. For the experiment, a pendulum system, CEM-IP-01 of Cemware Inc. is used and Lagrange equation and Jacobian linearization are adopted for the dynamic analysis of the pendulum system. In addition, the output responses of the state feedback control and the output feedback control of the pendulum system are compared before the experiment by Matlab. Finally, we directly verify the practical use of the linear state observer by recognizing and solving some real problem to control the inverted pendulum system in practice.

• Journal of IKEEE
• /
• v.18 no.2
• /
• pp.220-227
• /
• 2014

This paper presents a control method of Single-Inductor Dual-Output DC-DC Converter using Common mode feedback and differential feedback loops. To generate duty used for differential mode feedback loop, this paper propose relative sawtooth circuit using current divider circuit which makes ramp signal with variable dead-time. Two outputs of the Single-Inductor Dual-Output DC-DC Converter are specified for 2.8 V and 4.2 V with input voltage 2.5 V. The maximum conversion efficiency of designed SIDO DC-DC Converter is 95% at total output power of 539mW. Cross regulations of Boost1 and Boost2 are 3.57% and 4% each, when increasing twice times output current.

• Journal of IKEEE
• /
• v.17 no.1
• /
• pp.83-88
• /
• 2013

This paper presents the output feedback control design for feedforward nonlinear systems with input and output delay. The proposed output feedback controller is composed of a linear observer and a linear controller. It is shown that by using Lyapunov-Krasovskii theorem, the proposed controller ensures a global asymptotic stability for arbitrarily large delay. Finally, an illustrative example is given in order to show the effectiveness of our design method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.3
• /
• pp.559-564
• /
• 2010

The GMDH(Group Method of Data Handling) algorithm can be used to predict the complex nonlinear systems. The traditional GMDH algorithm produces the prdicted output of the system model in the output layer through the input layer and the intermediate layers as the prescribed process. The outputs of each layer are produced only by the outputs of the former layer. However, in the traditional GMDH algorithm, though the optimal structure of each layer is derived, the overall structure may not be derived optimally. To overcome this problem, GMDH prediction model which has the overall optimal structure is constructed by feeding back the error between the predicted output and the real output. This can make the prediction more precise. The capability improvement of the proposed algorithm compared to the traditional algorithm is verified through computer simulation.

• Journal of IKEEE
• /
• v.20 no.4
• /
• pp.378-384
• /
• 2016

This paper addresses the output feedback consensus problem for high-order integrators under a directed network with a communication delay. In order to solve this problem, the dynamic output feedback controller is proposed. Also, by using Lyapunov-Krasovskii functional, it is shown that the existence of the proposed consensus controller can always be guaranteed even in the presence of an arbitrarily large communication delay.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.384-392
• /
• 2018

A multiple-output LDO regulator is a good choice in terms of the efficiency in embedded systems requiring various supply voltages. A small feedback factor in LDO incurs the long settling time, resulting in large ripples in the time-multiplexing strategy. A new proposed topology enhances the settling time, and hence the ripples by incorporating the constant feedback factor with different reference voltages. The simulation results of a prototype design in a standard $0.35{\mu}m$ CMOS process verify that the proposed strategy enhances the settling time and ripple characteristic by more than doubled than a conventional circuit using the feedback factor of less than 0.4.

• Journal of IKEEE
• /
• v.17 no.3
• /
• pp.267-274
• /
• 2013

This paper presents a design of LLC resonant converter IC for LED backlight unit based on PFM/PWM dual-mode feedback. Dual output LLC resonant architecture with a single inductor is proposed, where the master output is controlled by the PFM and slave output is controlled by the PWM. To regulate the master output PFM is used as feedback to control the frequency of the power switch. On the other hand, PWM feedback is used to control the pulse width of the power switch and to regulate the slave output. This chip is fabricated in 0.35um 2P3M BC(Bipolar-CMOS-DMOS) Process and the die area is $2.3mm{\times}2.2mm$. Current consumptions is 26mA from 5V supply.