• The Korean Journal of Nuclear Medicine
• /
• v.14 no.2
• /
• pp.1-9
• /
• 1980

혈액질환(血液疾患), 특히 용혈성빈혈(溶血性貧血)을 수반(隨伴)한 경우(境遇)에 적혈구(赤血球)의 생성(生成), 파괴과정(破壞過程)을 정확히 파악하는 것은 빈혈(貧血)의 발생기전(發生機轉) 및 병인(病因), 치료(治療), 예후(豫後) 결정(決定)에 매우 중요(重要)하다. 적혈수명측정법(赤血壽命測定法)은 최근(最近) 방사성(放射性)동위원소(同位元素)를 이용(利用)한 방법(方法)이 소개된 이래 널리 시행(施行)되어 왔다. 그러나 그 방법(方法) 및 결과(結果) 해석(解釋)에 표준화(標準化)가 되어 있지 않았던 중 1971년 ICSH (International Committee for Standardization in Hematology)에서 expert panel을 갖고 ICSH 추천 방법(方法)을 발표(發表)하였고, 본지(本誌)에서도 그 내용(內容)을 게재(揭載)한 바 있다. 1980년 ICSH는 전문기관 및 전문가의 협조(協調)를 얻어 다시 expert panal을 갖은 후 1971년에 추진한 적혈구수명측정법(赤血球壽命測定法)의 일부(一部)를 수정(修正)하여 ICSH의 표준방법(標準方法)으로 발표(發表)하였다. 개정(改正)된 표준방법(標準方法)과 1971년 ICSH추친 방법(方法)과의 차이(差異)는 다음과 같다. $^{51}Cr$표지방법중(標識方法中) 참고방법(參考方法)(Reference method)인 ACD법(法)에 수정(修正)을 가하여, ACD solution 구성성분(構成成分)이 차이(差異)가 있으며, 표지(標識)$^{51}Cr$의 양(量)을 체중당(體重當) $1.5{\mu}Ci$에서 $0.5{\mu}Ci$로 제한(制限)시켰다. 투여방법(投與方法)에 대한 언급 특히 투여하는 표지적혈구(標識赤血球)의 용적을 정확하게 측정 하기 위한 방법 4가지를 추가하였고, 검체준비(檢體準備) 과정중(過程中)의 pipet error를 방지(防止)하기위해 일정(一定)한 형태의 pipet을 사용(使用)하며, 1ml의 tuterculin syringe는 사용(使用)하지 않기로 하였다. 또한 결과분석시(結果分析時) 혈구용적(血球容積)의 항정성(恒定性)을 위해 Sodium pertectnetate($^{99m}Tc$)를 이용(利用)해 혈구용적(血球容積)을 반복(反復)해 측정(測定)하도록 하였으며 이때 사용(使用)하는 방사성동위원소(放射性同位元素)는 $^{32}P$ 대신 $^{99m}Tc$로 하였다. 결과해석시(結果解釋時) IgG 항체(抗體) 또는 IgM 항체(抗體)에 따른 차이점(差異點)에 대한 고려가 추가(追加)되었다. ICSH와 국제혈액학회(國際血液學會)에서 수정(修正)된 ICSH 표준방법(標準方法)에 의한 적혈수명측정법(赤血壽命測定法)을 널리 소개(紹介)하여 결과(結果)의 표준화(標準化)를 기하고자 연관잡지(聯관(關)雜誌)에 게재(揭載)할 것을 요청(要請)하였기에 전문(全文)을 본지(本誌)에 소개(紹介)하고자 한다.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.28 no.1
• /
• pp.29-34
• /
• 2008

This experiment was conducted to study the effects of growth stage and variety on the quality of whole crop rice(WCR) silage at National Institute of Animal Science, RDA from 2004 to 2005. Two types of rice("Chucheong" for food and "Hamasari" for whole crop) were harvested at six different growth stages (heading, flowering, milk, dough, yellow ripen and fully ripen stage) and ensiled each harvest stages. Crude protein(CP) content of all whole crop rice silage was also decreased with progressed maturity at harvest and TDN(total digestible nutrient) content of WCR was increased. The average CP content of whole crop rice was higher than that of food rice. The contents of ADF(acid detergent fiber) and NDF(neutral detergent fiber) decreased with delayed harvest maturity. The content of TDN estimated from ADF content was increased with progressed maturity, but there was not found significant difference between rice varieties(p<0.05). The average pH value was 4.69 and it was increased with delayed harvest maturity. Acetic and butyric acid content were decreased, but lactic acid content was increased with progressed maturity. The experiments presented here show that all rice varieties may give a good quality silage. But some wrong practical method(grain loss, productivity, nutrient value, etc.) will make poor quality of rice silage. Therefore, dough stage of harvest maturity will be recommendable as proper harvest time for making high quality of whole crop rice silage in Korea.

• Horticultural Science & Technology
• /
• v.33 no.4
• /
• pp.486-491
• /
• 2015

In this study, we evaluated the differences in fruit development and quality indices of fruits subjected to blossom thinning before full bloom in 'Hanareum' and 'Niitaka' pears (Pyrus pyrifolia Nakai). We carried out a thinning treatments at 5 days before full bloom, targeting the blossoms at the 1st and 2nd position (T1) or the blossoms at the 6th and 7th position (T2) from the basal part of the flower cluster in both cultivars. Blossom thinning treatments increased the average fruit weight of early-season Asian pear 'Hanareum' up to 10.5% (T1) and 11.0% (T2) at harvest time (110 days after full bloom). The mid-season 'Niitaka' pear showed increased fruit weight of up to 12.6% (T1) and 16.8% (T2) at harvest time (170 days after full bloom). Moreover, these treatments increased the production rate of bigger sized fruits in both cultivars. Removal of blooms also affected fruit quality indices; the bloom-thinned fruits showed higher soluble solids contents (about $1^{\circ}Brix$) and higher skin color redness ($a^*$) especially in 'Niitaka' pears when compared to the non-thinned controls. Overall, the treatments increased the fruit size and weight as well as fruit quality including soluble solids and skin color. Bloom thinning treatment targeting the 6th to 7th blossom from the basal part of the flower cluster may be recommended as the practical thinning method in Asian pear 'Hanareum' and 'Niitaka'.

• Asian Journal of Turfgrass Science
• /
• v.22 no.2
• /
• pp.217-223
• /
• 2008

This study was conducted to figure out the effect of silicate as growth stimulator on growth of 'Pencrosss' creeping bentgrass. Creeping bentgrass(Agrostis palustris cv. 'Pencross') at the nursery of Sinwon Country Club was used. Silicate was applied at the concentration of 0, $200{\times}$, $500{\times}$, $1.000{\times}$. Polt size was 1 by 2 meter and there were three replications with completely randomized design(CRD). Creeping bentgrass growth was evaluated with visual turf grass quality, root length and No. of tiller density(ea/$cm^2$). Results of this study are as followings; 1. Average root length with silicate was $1.5{\sim}1.9cm$ longer than control. Especially, Root length of silicate was $7{\sim}8cm$ in summer. 2. Tiller density with silicate was $l8{\sim}22ea/cm^2$, $0.4{\sim}2.l$ less than control. But there was no significant difference. 3. Visual turfgrass quality with silicate was $5.0{\sim}8.3$, $0.3{\sim}1.5$ higher than control. But there was no significant difference. In conclusion, silicate might be grown as root growth stimulator of creeping bentgrass during summer in Korea. However, this study was conducted under one year. Accordingly, in-depth experiment should be done over several years.

• Applied Biological Chemistry
• /
• v.47 no.1
• /
• pp.113-119
• /
• 2004

Persistence of the triazole fungicides, bitertanol and tebucnazole was investigated after their application at recommended and double rate on greenhouse-grown peppers. The half-life of bitertanol and tebuconazole on peppers at recommended and double rate was $5.2{\sim}6.1$ and $4.6{\sim}5.2$ days, respectively. Half-lives of bitertanol and tebuconazole on pepper leaves $(16.8{\sim}22.5\;days)$ was longer than those in the peppers. Residual concentration of bitertanol and tebuconazole on pepper leaves 24 days after application were 10.1 and 17.5 mg/kg, respectively, and these levels were higher than MRL which had been established at 3.0 and 5.0 mg/kg in Korea. Pattern of dissipation was well fitted to the first-order kinetics. In household washing experiment with surfactant, dislodgeable portions on pepper leaves of bitertanol and tebuconazole were occupied 36% and 48% of the residues found 24 days after application.

• Korean journal of applied entomology
• /
• v.46 no.1 s.145
• /
• pp.153-158
• /
• 2007

This study was conducted to develope the observing methods for density of stink bugs in soybean reproductive stage. The adults and nymphs of bean bug, Riptortus clavatus, red-banded shield bug, Piezodous hybneri, green stink bug, Nezara antennata, Sole bug, Dolycoris baccarum, and brown marmorated stink bug, Halyomorpha halys were observed by three observing methods such as beating, sweeping net, and visual counting methods in the full bloom (R2), full pod (R4) and beginning maturity (R7) of soybean. As a result, total number of stink bugs observed was the highest with 5,214.2 by beating method, and then was 2,581.8 by visual counting method, and was the lowest with 103.1 by sweeping net method. Total number of stink bugs observed by the beating and visual counting methods was P. hybneri, followed by N. antennata, H. halys, R. clavatus and D. baccarum with clear difference in observed number of each stink bugs while total number of stink bugs observed by sweeping net method was very low in the range of 18 to 23. Accordingly, the observed density of stink bugs exception of R. clavatus adult by beating method was generally high. However, the number of R. clavatus adult was more observed by flushing method than that by beating method from the beginning bloom (R1) to full maturity (R8), and was more observed at morning time than that at afternoon time. Therefore, two observation methods that flushing method for R. clavatus and beating method for the other stink bugs were recommended for the occurring density of stink bugs in soybean because both bean bug and pentatomidae stink bugs have distinct behavior characteristics such as flying and dropping.

• Economic and Environmental Geology
• /
• v.39 no.3 s.178
• /
• pp.301-328
• /
• 2006

The geology of the Tumbang Mirih area in the Middle Kalimantan, Indonesia comprises Permian to Carboniferous Pinoh Metamorphic Rocks and Cretaceous Sepauk Plutonics of the Sunda Shield, late Eocene Tanjung Formation, Oligocene Malasan Volcanics, Oligocene to early Miocene Sintang Intrusives and Quaternary alluvium. Results of geochemical exploration and geological mapping exposed obviously that large amounts of gold-bearing quartz veins were found in the whole Tumbang Mirih areas. In many places, gold grains were megascopically detectable from panning products of stream sediments and conglomerate as Quaternary sediments. Even though no remnants of quartz veins are revealed in the most of survey area except Taran region, association of fold grains with layers of quartz pebbles and clays which correspond to the horizon of unconformity or previous river bottom indicates that the gold grains were separated from quartz veins. Along rivers often pebbles and clay layers just over or 10 to 20cm above the current waterlevel are recognized. The occurrence of gold in the conglomeratic layer was frequently confirmed during geochemical exploration. Since the conglomeratic layer was old stream sediments of Quaternary, it can be assumed that deposition of golds was controlled by shape of river floor, speed and shape of river flow, and distance from the source rock. Taran area and northern Takaoi area based on the all data are recommended as the promising areas.

• Journal of Gifted/Talented Education
• /
• v.21 no.4
• /
• pp.979-992
• /
• 2011

Gifted children cultivate their many talents through experience. For the purpose of revealing the talents or abilities of gifted children, it is necessary to provide them with various types of environment for their exploration from the early stage of their school age. In addition, knowing their concern, aptitude and interest from the early stage of their school age will be much helpful for them to grow, advance and search for their future career path. Accordingly, the purpose of this study is to examine the definitional and cognitive characteristics of gifted children through tests on the creative disposition, creative thinking power, multiple intelligences and morality of gifted children at the early stage of their school age in order to provide basic information on the gifted children studies. Accordingly, 90 gifted children were selected as the participants of this study through observation and recommendation. The result showed much difference between the second grade and the third grade in their creative disposition, creative thinking power, multiple intelligences and morality according to school year. As for the difference according to gender, the second grade female students showed meaningful differences in the sub-domain of creative disposition, multiple intelligences and morality and the third grade showed no differences. Such study result shows that students in upper school year clearly have their own sense of purpose.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.677-681
• /
• 2015

Aluminum alloy was examined as a material of low weight reactor for hydrolysis of $NaBH_4$. Aluminum is dissolved with alkali, but there is NaOH as a stabilizer in $NaBH_4$ solution. To decrease corrosion rate of aluminum, decrease NaOH concentration and this result in loss of $NaBH_4$ during storage of $NaBH_4$ solution. Therefore stability of $NaBH_4$ and corrosion of aluminum should be considered in determining the optimum NaOH concentration. $NaBH_4$ stability and corrosion rate of aluminum were measured by hydrogen evolution rate. $NaBH_4$ stability was tested at $20{\sim}50^{\circ}C$ and aluminum corrosion was measured at $60{\sim}90^{\circ}C$. The optimum concentration of NaOH was 0.3 wt%, considering both $NaBH_4$ stability and aluminun corrosion. $NaBH_4$ hydrolysis reaction continued 200min in aluminum No 6061 alloy reactor with 0.3 wt% NaOH at $80{\sim}90^{\circ}C$.

• Progress in Medical Physics
• /
• v.16 no.2
• /
• pp.77-81
• /
• 2005

To determine the appropriate method out of various available methods to measure build-up doses, the measurements and comparisons of depth doses of build-up region including the surface dose were executed using the Attix parallel-plate ionization chamber, the Markus chamber, a cylindrical ionization chamber, and a diode detector. Based on the measurements using the Attix chamber, discrepancies of the Markus chamber were within $2\%$ for the open field and increased up to $3.9\%$ in the case of photon beam containing the contaminant electrons. The measurements of an cylindrical ionization chamber and a diode detector accord with those of the Attix chamber within $1.5\%\;and\;1.0\%$ and after those detectors were completely immersed in the water phantom. The results suggest that the parallel-plate chamber is the best choice to measure depth doses in the build-up region containing the surface, however, using cylindrical ionization chamber or diode detector would be a reasonable choice if no special care is necessary for the exact surface dose.