• Proceedings of the Acoustical Society of Korea Conference
• /
• 1995.06a
• /
• pp.61-64
• /
• 1995

본 논문에서 다루는 두 가지의 큰 내용은 블록처리 차원에서 많이 연구되고 이용되어 오던 추정 연구를 순차처리로 확산시키는 것이고, 나머지 하나는 피치 바이어스에 대해 강인한 추정을 함과 동시에 비정상 신호의 특징도 간과하지만은 않는 순차형 추정기를 제안한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5A
• /
• pp.484-489
• /
• 2007

The main disadvantage of orthogonal frequency division multiplexing (OFDM) systems is its sensitivity to carrier frequency offset and timing offset. This paper proposes a simple way of improving the performance of the integer frequency offset (IFO) estimator in OFDM-based digital video broadcasting (DVB) system. By modifying the conventional maximum likelihood (ML) estimator to have multi-stage estimation strategy, IFO estimator is derived. Simulations indicate that the proposed IFO estimator works robustly with reduced computational burden when compared to ML estimator.

• Journal of Advanced Navigation Technology
• /
• v.2 no.1
• /
• pp.34-42
• /
• 1998

An adaptive state and input estimator for the tracking of a target with unknown randomly switching input is developed. In modeling the unknown inputs, it is assumed that the input sequence is governed by semi-Markov process. By incorporating the semi-Markov probability concepts into the Bayesian estimation theory, an effective adaptive state and input estimator which consists of parallel Kalman-type filters is obtained. Computer simulation results reveal that the proposed adaptive estimator have improved tracking performance in spite of the unknown randomly switching input.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.3
• /
• pp.8-13
• /
• 1989

The parameters of bipolar random square-wave signal process, amplitude and phase with unknown probability distribution are shown to be simultaneously estimated by using Gauss-Markov estimator so that transmitted digital data can be recovered under the additive Gaussinan noise environment. However, we see that the preprocessing stage using the correlator composed of the multiplier and the running integrator is needed to convert the received process into the sampled sequences and to obtain the observed data vectors, which can be used for Gauss-Markov estimation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.10
• /
• pp.66-74
• /
• 2008

Surveillance system using active tracking camera has no distance limitation of surveillance range compared to supersonic or sound sensors. However, complex motion tracking algorithm requires huge amount of computation. Compared to conventional methods using DSPs or embedded processors, this paper proposes and implements a novel motion tracker unit that detects and extracts motion information of moving objects by using picture difference of consecutive frames. The proposed motion tracker unit was implemented in FPGA with about 13,000 gates. It processes NTSC format video and was verified by embedding it into the active surveillance camera system. We also propose and implements a motion estimator unit linkable to video codec by embedding the proposed motion tracker unit into ready-made motion estimator unit. The implemented motion estimator unit is about 17,000 gates in $0.35{\mu}m$ process.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.8
• /
• pp.899-905
• /
• 2014

In this paper, we propose a method that can be used to back-stepping controller design for speed control of Brushless Direct Current (BLDC) motor. First, back-stepping controller is designed with load torque estimator. The estimator is included to adapt to the variation of load torque in real time. Finally, the proposed controller is tested through experiment with a 120W BLDC motor for the angular velocity reference tracking performance and load torque volatility estimation. The simulation result verifies the performance of the proposed controller.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1270-1281
• /
• 1998

Frequency offset in an orthogonal frequency division multiplexing (OFDM) system is known to cause the inter-channel interference (ICI), amplitude and phase distortion of a received signal, resulting in a severe performance degradation of the total system. In this paper, we propose an improved pilot-based masimum likelihood frequency offset estimation technique, which uses the predefined sync-subchannels, and derive the error performance of the proposed frequency offset estimator analytically. The proposed technique improves the performance of the frequency offset estimator by adding up the frequency offset caused by coherent phase changes and averaging out the effect caused by random phase error. It is confirmed by computer simulations that the upper bound of error variance for the proposed frequency offset estimator analytically derived in this paper is correct, and that the proposed estimator has better performance than the previous ones in terms of error variance, tracking range, and time-varying characteristics of a channel.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1998.06a
• /
• pp.161-164
• /
• 1998

본 논문은 이동성 추정기를 이용하여 수신체의 이동성 정도 또는 채널의 변화 정도를 추정해 냄으로써 채널 추정에 사용하는 OFDM 심볼의 개수를 결정하여 최적의 채널 추정을 수행하는 알고리즘을 제안하고, 성능 분석을 보여준다. OFDM 시스템의 채널 보상에 다수의 심볼을 사용하면 고정된 수신체에서 우수한 성능을 나타내지만 시간 변화적인 다중 경로환경에서는 오히려 출력 SNR 성능을 저하시킨다. 제안된 이동성 추정기를 이용한 채널 추정 알고리즘은 고정 수신체 및 고속의 이동체 뿐만 아니라 복잡하고 변화 무쌍한 다중 경로 페이딩 채널 환경에 강인한 특성을 나타낸다는 것을 전산 모의 실험을 통하여 확인하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.5
• /
• pp.51-56
• /
• 1998

문장내 휴지구간의 위치와 길이는 합성음의 자연성을 결정짓는 주요 운율 파라미터 중 하나이다. 본 연구에서는 한국어 음성합성기의 합성음 생성에서 자연성 개선을 위해서 문장내 끊어읽기 위치 및 길이를 추정하기 위한 방법을 제안한다. 먼저 실제 발화에서 끊어 읽기가 발생하는 요인을 검토하였다. 그리고 이들 요인에 부합하여 텍스트에 4단계의 끊어 읽기를 표기함으로써 다량의 데이터를 확보하고 이를 이용한 NN 학습 결과와 HMM 추정 기의 성능을 비교 검토한다. 현재까지의 결과로는 NN 학습의 경우 끊어읽기 없는 경우와 긴 끊어읽기의 추정에서는 우수한 예측능력을 보이지만 짧은 끊어읽기, 중간 끊어읽기의 경 우는 HMM의 성능이 우수한 것으로 판명되었다. 전반적인 성능에서는 HMM이 우수하며 끊어읽기 종류에 따라 추정오차가 10∼25%로서 안정적인 결과를 얻었으며 TTS에의 활용 가능성을 보였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1289-1301
• /
• 2011

In this paper, flux estimation method at the Induction motor is applied to stability flux estimate of possibility in overall speed domain. angle operation has voltage and current and speed information using the Induction motor direct control method. Induction motor direct control is material to flux information. Exact flux estimation method to using current model flux estimator of low-speed domain and voltage model flux estimator of high-speed domain. Speed and current and flux controller using PI controller. And error of integral requital for add to Anti-Windup PI controller. Verified to performance of Current model Flux controller and voltage model flux controller using Matlab / Simulink. Analysis has parameter influence of direct vector control and indirect vector control at the Induction motor vector control. So, verified to minute control. Analyzed to simulation result and proof to validity of presented algorithm.