• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.433-435
• /
• 1998

본 논문은 비선형 시스템에서 시스템의 출력이 원하는 궤적을 따라가도록 하기 위한 반복제어 이론을 소개한다. 본 논문에서는 전체 시스템의 안정화를 위해서 추적오차의 부호에 따라 부호가 결정되는 부호전환 제어(switching control) 입력을 사용하고 있다. 그러나 본 논문에서 사용하는 제어 입력은 크기가 추적오차의 크기에 비례하게 되어 있어서 정상상태에서 발생할 수 있는 고속의 부호전환 문제(chattering problem)를 크게 완화시켜서 정상상태에서의 성능을 개선시키고 있다. 또한, 오차가 어떤 범위를 벗어나 있으면 그 범위 안으로 지수적으로 수렴하여 그 안에 계속 머물도록 하는 제어 기법도 소개하였다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.3
• /
• pp.289-294
• /
• 1998

본 논문에서는 상태행렬과 입력행렬에 시변 불확실성이 있는 선형시스템에 대한 강인 추적 제어기를 제안한다. 본 논문에서 대상으로 하는 불확실성은 block-diagonally structured uncertainty와 norm bounded uncertainty인데 모두 정합 조건을 만족시킬 필요는 없다. 폐루프 시스템이 불확실성하에서 안정할 수 있는 조건을 제시하고 이 조건이 선형행렬 부등식으로 나타낼 수 있음을 보인다. 추적 오차를 줄이고 오차 감소 비율을 증가시킬 수 있는 최적화 방법도 제아한다. 또한 불확실성의 크기가 0으로 줄어들면 추적 오차도 0으로 줄어듬을 보인다.

• Journal of Korea Game Society
• /
• v.19 no.5
• /
• pp.91-102
• /
• 2019

In this paper, we propose an improved method of plane tracking in developing AR games for smartphones using magnetic field sensor. The previous method based on ARCore is a VIO method using a mixture of SLAM and IMU of smartphones. The disadvantages of accelerometers and gyroscopes in IMUs cause errors in tracking the plane. We propose an improved method of planar tracking by adding the magnetic field sensor as well as the existing IMU sensors. Experimental results shows that our method reduces the error of the smartphone posture estimation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.6
• /
• pp.572-580
• /
• 2015

RF skin tracking of instrumentation RADAR cannot acquire stable track data, because of effect of multipath interference especially elevation direction. In this paper, low altitude target tracking method using laser tracking system is suggested to overcome this restriction. The effect of multipath can be reduced by increasing angle resolution with laser characteristics of very short pulse and narrow beamwidth. RF skin track, beacon track and laser track data for the integrated calibration target on the ground and target ship on the sea are gathered. And they are compared and analyzed to confirm the performance of laser tracking system. As a result, it shows that the suggested laser track method has better performance than RF skin track under multipath conditions.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2338-2340
• /
• 2004

탐지레이다 또는 TWS 레이다의 측정 정밀도는 추적 필터 설계에서 quantization 문제로써 고려해야 한다. 본 논문에서는 측정 정밀도가 추적필터에서 quantization 문제로 변환됨을 보이고 오차면적과 추정성능을 비교한다. 또한 오차면적을 줄이는 방안과 quantization이 존재하면 측정잡음과 관계한 공정잡음의 power spectral density를 선정함을 보인다.

• Tunnel and Underground Space
• /
• v.25 no.1
• /
• pp.56-67
• /
• 2015

In this study, a source locating technique applicable to transversely isotropic media was developed. Wave velocity anisotropy was considered based on the partition approximation method, which simply enabled AE source locating. Sets of P wave arrival time were decided by the two-step AIC algorithm and they were later used to locate the AE sources when having the least error compared with the partitioned elements. In order to validate the technique, pencil lead break test on artificial transversely isotropic mortar specimen was carried out. Defining the absolute error as the distance between the pencil lead break point and the located point, 1.60 mm ~ 14.46 mm of range and 8.57 mm of average were estimated therefore it was regarded as thought to be 'acceptable' considering the size of the specimen and the AE sensors. Comparing each absolute error under different threshold levels, results showed small discrepancies therefore this technique was hardly affected by background noise. Absolute error could be decomposed into each coordinate axis error and through it, effect of AE sensor position could be understood so if optimum sensor position was able to be decided, one could get more precise outcome.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.2
• /
• pp.39-46
• /
• 2009

Heliostat, as a mirror system tracking the sun's movement, is the most important subsystem determining the efficiency of solar thermal power plant. Thus the accurate sun tracking performance under the various hazardous operating condition, is required. This study presents a methodology of development of the solar ray tracing technique and the application of it in the analysis of sun tracking error due to the heliostat geometrical errors. The geometrical errors considered here are the azimuth axis tilting error and the elevation axis tilting error. We first analyze the geometry of solar ray reflected from the heliostat. Then the point on the receiver, where the solar ray reflected from the heliostat is landed, is computed and compared with the original intended point, which represents the sun tracking error. The result obtained shows that the effect of geometrical error on the sun tracking performance is varying with time(season) and the heliostat location. It also shows that the heliostat located near the solar tower has larger sun tracking error than that of the heliostat located farther.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.2
• /
• pp.139-148
• /
• 1997

본 논문에서는 비선형 마찰이 존재하는 조준경 안정화 시스템에 대해서 마찰력 보상과 성능개선을 위한 신경망제어기의 설계방법을 제시한다. 제안한 신경망제어기는 비례, 적분, 진상(PI/LEAD) 제어기와 신경회로망과의 병렬로 구성되며, 제어 목적은 비선형 마찰과 외란이 존재하여도 안정거울의 각속도 추적성능과 안정화 성능의 향상에 있다. 신경회로망의 입력으로 안정거울의 각속도 추적오차와 추적오차의 적분, 제어입력이 필터를 통과한 신호가 사용되며, 신경호로망은 간접학습구조에 의해 학습된다. 조준경 시스템의 비선형 마찰력인 쿨롱마찰력의 크기가 외부환경에 따라 변하는 경우와 시스템으로 외란이 인가되는 경우에 대하여도 제안한 병렬제어기는 기존의 PI/LEAD 제어기보다 추적과 안정화 성능면에서 우수함을 컴퓨터 모의 실험으로 확인한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.2
• /
• pp.75-82
• /
• 2002

It is useful to detect the tracking error with an optimal view in the presence of measurement origin uncertainty. In this paper, after the investigation of the targer error dependent on the detection threshold as well as the detection and false alarm probabilities in a clutter environment, a new algorothm that optimizes the threshold of validation region for target trackinf is proposed. The performance of the algorithm is demonstrated through computer simulations.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.12 s.354
• /
• pp.61-67
• /
• 2006

This paper proposes the algorithm for tracking of the residual phase errors incurred by carrier frequency offset and sampling frequency offset in the orthogonal frequency division multiplexing (OFDM) systems which are suitable for high data rate wireless communications. In the OFDM systems the subcarriers which are orthogonal to each other are modulated by digital data and transmitted simultaneously. The carrier frequency offset causes degradation of signal to noise ratio(SNR) performance and interference between the adjacent subcarriers. The errors in the sampling timing caused by the sampling frequency difference between the transmitter and the receiver sides also cause a major performance degradation in the OFDM systems. The residual error tracking and compensation mechanism is essential in the OFDM system since the carrier and the sampling frequency offset cause the loss of orthogonality resulting in the system performance loss. This paper proposes the scheme where the channel gain and the payload data information are reflected in the residual error tracking process which results in the reduction of the estimation error and the tracking performance improvements under the frequency selective fading wireless channels.