• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.64-71
• /
• 2014

Multiplier performs a complex arithmetic operation in various signal processing algorithms such as multimedia and communication system. The multiplier also suffers from its relatively large signal propagation delay, high power dissipation, and large area requirement. This paper presents memristor-CMOS based reconfigurable multiplier reducing area occupation of the multiplier circuitry and increasing compatibility using optimized bit-width for various applications. The performance of the memristor-CMOS based reconfigurable multiplier are estimated with memristor SPICE model and 180 nm CMOS process under 1.8 V supply voltage. The circuit shows performance improvement of 61% for area, 38% for delay and 28% for power consumption respectively compared with the conventional reconfigurable multipliers. It also has an advantage for area reduction of 22% against a twin-precision multiplier.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.190-196
• /
• 2014

This paper proposes a mobile-optimized pedestrian detection method using Cascade of HOG(Histograms of Oriented Gradients) for ADAS(Advanced Driver Assistance System) on smartphones. In order to use the limited resource of mobile platforms efficiently, the method is implemented by the OpenCL(Open Computing Language) library, and its processing time is reduced in the following two aspects. Firstly, the method sets a program build option specifically and adjusts work group sizes as variety of kernels in the host code. Secondly, it utilizes local memory and a LUT(Look-Up Table) in the kernel code to accelerate the program. For performance evaluation, the developed algorithm is compared with the mobile CPU-based OpenCV(Open Computer Vision) for Android function. The experimental results show that the processing speed is 25% faster than the OpenCV hogcascade.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.159-164
• /
• 2001

An extensive range of pumping facilities are employed in the regional water supply system in metropolitan areas, and optimization and the systematic combination of the pump facilities have direct bearing on the stability and economy of the water supply system concerned. These systems must be able to guarantee stability, efficiency and offer high reliability. Preparation of metropolitan area regional water supply system construction project must include a basic plan which takes into account the suitability of pumping facilities to be used, the environment in which facilities will be installed, man-power requirements and basic operational and management policies. This paper contains over-all analysis of the management of metropolitan area regional water supply systems and highlights the cause of Inefficiency and energy waste and puts forward a remedial plan of action. In addition, pump/motor specification programs were developed using Visual Basic to assist selection of the same.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.8 s.338
• /
• pp.27-34
• /
• 2005

In this paper, FPGA It/w and S/W Embedded system for LDM remote control is implemented. XScale CPU is used on developed system and in communcation ethenet and serial is used. CPU interface with H/W LDM rotation and to drive LDM FPGA logic is implemented, to transmit LDM data from long distance command packet is composed, for S/W Embedded linux is used to design linux device driver and linux application program. This S/W is run by module so by loading this module to linu)( file system it can do any movement. Also by compiling Embedded linux to the system it can lower the price of the system. By using this H/W and S/W theory it can be used on any other embedded system.

• Fire Science and Engineering
• /
• v.24 no.6
• /
• pp.28-33
• /
• 2010

The present study develops a numerical model based on the computational fluid dynamics technique to analyse the thermal flow characteristics of large scale fire calorimeter and examine the characteristics of primary parameters affecting on the uncertainty of heat release rate measurement. ANSYS CFX version 12.1 which is a commercial CFD package is used to solve the governing equations of the thermal flow field and the eddy dissipation combustion model and P-1 radiation model are applied to simulate the fire driven flow. The numerical results shows that the horizontal duct system with $90^{\circ}$ bend duct was shown relatively high deviated asymmetric flow profiles at the sampling location and the deviation of the velocity field was higher than that of the temperature and species quantities. The present study shows that the computational model can be applicable to optimize the design process and operating condition of the large scale fire calorimeter based on the understanding of the detail flow field.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.111-119
• /
• 2015

Smart Grid is a next-generation intelligent grid to optimize energy efficiency by integrating information and communication technologies to the existing power grid as a two-way exchange of information. HPGP communication standard for smart grid implementation has been developed for the emerging smart energy, home automation, electric vehicle communications applications. HPGP communication standard has the advantage of reducing cost and power consumption. Also, it can be interoperated with the previous HPAV communication standard. For the introduction of a new communication standard, the analysis of the reliability and interoperability verification is required. In this paper, we present sniffer test method as reliability test method about power line communication between PEV(Plug-in Electric Vehicle) and EVSE(Electric Vehicle Supply Equipment). Power line communication between PEV and EVSE is one of the most important Smart Gird applications. Also, we analyzed sniffer test results about power line communication based on HPGP between PEV and EVSE by using QCA7000 device, AVitar and Tool kit.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.213-220
• /
• 2016

In order to drive on road safely, the type of road design and construction is basically needed to optimize driver's safety and vehicle performance. Although the heavy traffic highways were built by reflecting these factors, the national highways and local roads have still taken a lot of problems. In this study, we analyzed the behavior characteristics of a vehicle according to the speed variation of the vehicle using the PC-Crash program for the traffic accidents reconfiguration at GULUN interchange located Hongcheon in Gangwon Province. the conditions outlet surface of the road for analysis were dry road surface, wet road surface and icy road surface. As a result, we identified the fact that the friction coefficient of road surface and the speed of vehicle affected to vehicle behavior characteristics of outlet shape in GULUN interchange, and showed the possibility that we can verify a problem about road design through to this simulation in advance.

• Journal of the Korean Solar Energy Society
• /
• v.35 no.6
• /
• pp.51-60
• /
• 2015

In statutes on the promotion of distribution of new and renewable energy, which were revised in 2014, daylight system and fuel cell were added in addition to existing new and renewable energy sources. This study, therefore, aimed at setting up targets for the introduction of daylight system and analyzing the installation rate of new and renewable energy which can be provided by daylight system for the aggressive use of daylight system, thereby deducting the optimal combination ratio with other new and renewable energy sources. The results of the study are as follows. First, when a prism-shaped daylight system was installed to a round indoor gymnasium among domestic indoor gymnasiums, out of a supply obligations allotment rate of 15% of new and renewable energy, the rate of daylight system was basically set at 2.5%. Second, therefore, with daylight system coming first, the lacked supply obligations rate was taken up by solar photovoltaic, solar heat and geothermal heat. In addition, using the KRESS Program, economic, technical, environmental and complexity evaluations for the upper 5% was made, deducting the optimal ratio of the system. The results produced the following optimal combination ratios: solar photovoltaic (83.3%) in economic evaluation, solar heat (8.3%) and geothermal heat (75%) in technical evaluation, solar photovoltaic (83.3%) in environmental evaluation, and solar photovoltaic (83.3%, the same as in economic evaluation) in complexity evaluation.

• Journal of the Korea Society for Simulation
• /
• v.23 no.4
• /
• pp.143-150
• /
• 2014

Cloud computing is fast becoming the wave of the future for both home and business computing. Because of this growing acceptance, we can expect an explosion of diverse cloud service providers in the coming years. However, the cloud is not a single entity, rather it is a set of many disconnected islands of application (SaaS), infrastructure (IaaS), and different platform (PaaS) services. Cloud brokering mechanisms are essential to transform the heterogeneous cloud market into a commodity-like service. Cloud service brokers (CSBs) are the new form of business entities to help to aggregate the scattered set of cloud services and make conveniently available to their diverse users. CSBs can reserve a certain percentage of their clients' (users') demand and satisfy the remaining portion in an on-demand basis. In doing so, they need to minimize cost of both reserved and on-demand instances as well as the distance of a link between the cloud service provider (CSP) and the user. The study proposes a reservation approach with a mixed integer model to optimizes the cloud service cost and quality.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.134-134
• /
• 1999

스퍼터링 소스는 전자기 박막 등 기능성 박막을 비롯하여 결질피막, 장식성 피막등의 제조에 이용되는 것으로 각종 증발원 중에서 가장 널리 사용되는 증발원이다. 70년대 이후 스퍼터링 소스는 마그네트론 스퍼터링으로 대표되는 방식이 사용되어 왔으며 지금까지도 가장 일반적인 방식이 되어 왔다. 마그네트론 스퍼터링 증발원은 증발율에서는 기술적인 향상이 이루어진 반면 이온화율의 향상은 그다지 이루어지지 않아 경질피막과 같은 화합물 피막의 특성 향상에는 한계를 드러내게 되었다. 그러다가 186년 Window 등 이 자장의 세기를 변형시킨 비평형 마그네트론 소스(Unbalanced Magnetron;UBM)를 처음 발표하여 이온화율의 향상이 가능하다는 것이 알려지면서 이에 대한 많은 연구가 진행되었다. UBM 소스는 마그네트론 스퍼터링 소스의 외부에 전자석을 설치하여 기판에 흐르는 이온의 양을 증가시킴으로써 소스와 기판사이의 거리를 증가시킬 수 있고 따라서, 복잡한 형상의 부품코팅이 가능하며 피막 특성을 향상시킬 수 있는 장점이 있다. 본 연구에서는 UBM 스퍼터링 소스를 설계, 제작하여 그 특성을 다양한 측면에서 조사하였다. 특히, 자작의 최적 설계를 통해 전자석의 조건을 도출하였음, Dual UBM 소스의 특성을 동시에 조사하였다. 자기장의 simulation에는 Quick field 프로그램을 이용하였고 기존의 방식과의 비교를 통해 최적의 조건을 도출하였다. 이를 바탕으로 inner pole의 크기를 30mm, outer pole의 크기를 26mm로 고정하여 설계하였고, 외부에 전자석이 설치된 UBM 소스를 제작하였다. 본 UBM 소스는 4" 타겟을 사용할 수 있으며 전자석의 조건을 10A까지 변화시켜 자기장의 세기를 변화시킬 수 있게 하였다. 제작된 소스의 동작조건 설정과 최적화를 위한 스퍼터링 장치를 함께 제작하여 UBM 소스의 최적 동작 조건을 도출하였다. 전자석의 전류가 4.5A일 때 Inner Pole과 Outer Pole의 자기장의 세기가 도일함을 알 수 있었다. 기판과 타겟의 거리가 200mm일 경우에 기판에 흐르는 전류밀도는 2mA/cm2이상이 됨을 확인하였다. 이 결과는 기존의 마그네트론 소스가 기판과 타겟사이의 거리가 100mm일 때 1mA/cm2 정도가 되는 것과 비교하면 이온화율이 획기적으로 향상된 것임을 알 수 있다.수 있다.