• Journal of KIISE:Software and Applications
• /
• v.32 no.3
• /
• pp.227-235
• /
• 2005

In the embedded system domain, both memory requirement and energy consumption are great concerns. To save memory and energy, the 32 bit ARM processor supports the 16 bit Thumb instruction set. For a given program, the Thumb code is typically smaller than the ARM code. However, the limitations of the Thumb instruction set can often lead to generation of poorer quality code. To generate codes with smaller size but a little slower execution speed, Krishnaswarmy suggests a profiling guided selection algorithm at module level for generating mixed ARM and Thumb codes for application programs. The resulting codes of the algorithm give significant code size reductions with a little loss in performance. When the instruction set is selected at module level, some functions, which should be compiled in Thumb mode to reduce code size, are compiled to ARM code. It means we have additional code size reduction chance. In this paper, we propose a profile guided selection algorithm at function level for generating mixed ARM and Thumb codes for application programs so that the resulting codes give additional code size reductions without loss in performance compared to the module level algorithm. We can reduce 2.7％ code size additionally with no performance penalty

• The Journal of the Korea Contents Association
• /
• v.11 no.3
• /
• pp.241-253
• /
• 2011

The present thesis is to concretize process stages and methods for effective use of online CGTS(creative group thinking system), or the web-storming program, in space design and to propose a support system for idea generation specific to space design. For the purpose of this study, activity factors in space design process and functional factors of the web-storming program were written into an interaction matrix, which was used for a questionnaire survey on correlations. Then, the results of the interaction matrix were visualized and analyzed following the procedure of observation-interpretation-application. The analysis found that the schematic design stage is most correlated where close collaboration is performed in the process of space design and that differences in correlation arise upon division of work. As such, the present study proposed 'provision of media for ideas in accordance with specific process and UI optimization' as a means of improving usability in schematic design that is closely correlated and suggested an idea to enhance the applicability of web-storming system in division of work.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.379-385
• /
• 2013

The tires, suspension type, and steering system can all cause pulling during braking. Among these, a drag link steering system and leaf-type suspension system are significant causes of vehicle pulling. In this study, the pulling problem is analyzed using the vehicle analysis program "ADAMS/CAR." The drag link and leaf spring behavior is analyzed to find the key reason for pulling. After this, the optimization program "Visual DOC" is used with "ADAMS/CAR" to find a steering link connection point to reduce pulling. After conducting this simulation, K&C (kinematic & compliance) test simulation with a modified connection point is conducted to determine whether the vehicle performance improves. Through a full braking simulation, it is verified that the pulling distance is reduced at braking.

• Korean Journal of Optics and Photonics
• /
• v.11 no.2
• /
• pp.67-72
• /
• 2000

A lot of varIOUS studies are taking advantage of annular masks or various pupil filters to design optical systems such as a digital versatile disc (DVD) pick up head and precise scanning microscopy that have the superresolution beyond the diffraction limit. We considered both annular mask and pupil filter for the superresolution system. Since image quality is a function of annular width, position and modulation amount, we computel'lzed the optimized condition for the phase modulation and mvestigated the variation of lhe center peak: intensity for the phase modulated system From tills result, we were able to detenrune the best conditions for the annular apodizer, wluch give the maximum value of the center peak intensity_ We made especially sure that the phase modulated system have an excellent compensation for spherical aberration as it lllcreases. eases.

• Journal of the Korean Society for information Management
• /
• v.20 no.2
• /
• pp.285-318
• /
• 2003

The purpose of this research is to suggest a theoretical base and guideline for the national scientific and technical information center which is assigned to take charge of the management and building knowledge and information infrastructure of the national scientific technology. And the objective of this study is to contribute to strengthen the need of the building of the national scientific and technical information center and provide operation programs and vision toward information center which will be established later. This study suggests a plan and strategy which make it possible to conduct functions as the national repository, clearinghouse, and portal gateway of the electronic resource and propose space program for the optimal building construction. Therefore, the contents of this study cover the building of the national scientific and technical information center as well as the basic plan of scale and space program, validity analysis of site location and environment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.2
• /
• pp.208-216
• /
• 2002

In this paper, the design method of a waveguide broad-wall longitudinal slot array monopulse antenna of X-type monopulse axes is presented, and the method is verified through manufacture and measurement. In the antenna design of this paper, the antenna size is small and the monopulse axes are X-type. Thus, the common continuous aperture distribution fuction is not suitable and the power balance among antenna quadrants should be considered. Also, since the waveguide height is reduced into 0.1 wavelength, the modelling of the slot characteristics is not simple. Thus, in this paper, the aperture distribution is optimized by using random number, and the balance among the quadrants is achieved by applying the quadrant weighting factor during the aperture optimization process. Also, the moment method procedure is accelerated by applying the interpolation technique to some part of the moment matrix, and the moment method procedure is added to the array synthesis program as a subroutine so that the slot characteristics can be calculated directly when it is required. Based on this method, a antenna of 28dBi is designed and manufactured. It is found that the antenna characteristics is similar to design data.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.2
• /
• pp.17-21
• /
• 2017

Horizontal thin-film thermoelectric cooler has been simulated using a commercial software (ANSYS Workbench Thermal-electric). The thermoelectric cooler consists of thin-film n-type $Bi_2Te_3$, p-type $Sb_2Te_3$ thermoelectric elements, and Au electrode, respectively. The hot spot was placed under the center of device which represents Joule heating. Numerical analysis was conducted by geometric variable, and a maximum temperature difference of $13^{\circ}C$ was obtained. As from the simulation parameters, we presented an optimized design for high efficiency cooling.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.295-298
• /
• 2010

There are three types of survey research system, telephone surveys, online surveys, interviews and so on. Currently most of the survey data have been verified by hand-collecting state in korea. Semi-automated research systems, some companies are using imported from abroad. This paper is the study on the design and implementation of linked research system for global standardization. The system is optimized through customizing for local conditions, as well as professionals for telephone surveys, online surveys, interviews even a normal user can enter the questionnaire easily and quickly. The result data is passed to the customer quickly and accurately. In particular, this system is based on automatic data input and collected provides best efficient analysis and statistics. Office programs and advanced statistical program SPSS is compatible with the maximum benefits for proposed system. Additionally, to achieve the import substitution effect through localization and to propose a global standard the proposed system is designed and implemented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1022-1026
• /
• 2013

Recently, the waste heat recovery technique using thermoelectric generator (TEG) in automotive engine has emerged to improve thermal efficiency in commercial vehicle. It is not difficult to recognize the numerous attempts that have been made to develop the TEG simulation model, but it is hard to find the model in conjunction with a particular heat engine system. In this study, 1-D commercial software AMESim was used to develop a computational model that can assess waste heat recovery from a diesel engine exhaust using TEG. The developed TEG simulation model can be used for evaluating the TEG performance of various types of TE module, and the diesel engine model can simulate any type of on and off-road diesel engines. The simulation results demonstrated that approximately 544.75W could be recovered from the engine exhaust and 40.4W could be directly converted into electricity using one TE module. The models developed in this study can be easily coupled with each other in the same computational program; thus, the models are expected to provide a viable tool for developing and optimizing a TEG waste heat recovery system in an automotive diesel engine.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.7
• /
• pp.1777-1788
• /
• 1999

The portability of Java language makes it possible to use heterogeneous computers without re-compiling of application programs. Java applet can also be transported to other computers via Web browser. In this research, a Cooperative Web Computing Environment(CWCE) that uses idle computers on the Intranet for cooperative parallel computing work is suggested. The CWCE allows to use more than a manager computer that sends applets and manages communication between other computers. The number of manager computers can be determined according to the characteristics of computing environment and any chosen application program. It can reduce the amount of communication overhead for the application programs especially with synchronized communication. For the CWCE, a decision function to determine the managing level is provided. The CWCE turns out to be useful computing environment for the applications with less computation request ratio and multi-managing can help to reduce the communication overhead especially for the applications with a high ratio of synchronization purpose communications.