• Journal of the Korean Institute of Gas
• /
• v.14 no.5
• /
• pp.19-25
• /
• 2010

The flash points for the systems, o-xylene+n-pentanol and m-xylene+n-hexanol, were measured by using Tag open-cup tester(ASTM D1310-86). The experimental data were compared with the values calculated by the Raoult's law and the optimization method using van Laar and Wilson equations. The calculated values based on the optimization method were found to be better than those based on the Raoult's law. The predictive curve of the flash point prediction model based on the van Laar equation described the experimentally-derived data more effectively than was the case when the prediction model was based upon the Wilson equation.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2003

Topology optimization has been evolved into a very efficient conceptual design tool and has been utilized into design engineering processes. Traditional topology optimization has been using homogenization method and optimality criteria method. homogenization method provides relationship equation between structure which includes many holes and stiffness matrix in FEM. Optimality criteria method is used to update design variables while maintaining that volume fraction is uniform. Traditional topology optimization has advantage of good convergence but has disadvantage of too much convergency time. In one way to solve this problem, element removal method using the criterion of an average stress is presented. As the result of examples, it is certified that convergency time is very reduced.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.4
• /
• pp.293-299
• /
• 2016

In this paper, a projection method is introduced which is used in topology design optimization. In the projection method, each active design variable is projected onto the design domain depending on the shape and size of the projection functions, and the finite element under this projection receives a solid material. Furthermore, the size of the projection function defines the minimum length scale of the structural members. Therefore, a designer can easily apply design constraints without complicated post-processing procedure. In addition, the projection method can be combined with the homogenization theory, and applied to material design problem for composite materials. Topology design optimization for the unit-cell of the periodic structures can maximize the effective material properties, which yields the optimal material distribution with maximum bulk or shear moduli under a given volume fraction.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.169-174
• /
• 2002

It has known that the DCMP(Directionally Constrained Minimization of power)and the ZF(Zero Forcing) can improve the SINR performance of an array antenna system by using spatial signature of wireless channel. This paper analyzes performance of DCMP and ZF in multiple scattering environments. To obtain the spatial signature of wireless channel. bothe DOA(Directional of Arrival) and AS(Angular Spread) of the received signals were estimated by using ESPRIT. The performance of the DCMP and the ZF was analyzed theoretically. Through computer simulation, the SINR performance were evaluated.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.08a
• /
• pp.460-464
• /
• 1998

일반적으로 파형 부호화법에서는 발성자의 개성과 메시지 정보를 보존하여 음질의 명료성이 우수하다. 하지만 파형 부호화법이 규칙에 의한 합성에 적응되도록 하기 위해서는 운유 조절에서 피치 변경법이 요구되어 진다. 본 논문에서는 스펙트럼의 왜곡율을 최소화하면서도 위상을 그대로 보존할 수 있는 시간영역에서의 피치변경법을 적용하였다. 이러한 방법들은 시간영역에서만 처리됨으로써 계산량을 줄여 실시간 운율조절에 적합하다. 결과적으로 피치주기를 100%에서 50%로 압축한 경우 평균 스펙트럼 왜곡율은 5.62%이고, 피치주기를 100%에서 200%로 신장한 경우 평균 스펙트럼 왜곡율은 4.20%정도로 비교적 우수한 결과가 얻어졌다.

• Radiation Oncology Journal
• /
• v.23 no.3
• /
• pp.176-185
• /
• 2005

Purpose: Film dosimetry as a part of patient specific intensity modulated radiation therapy quality assurance (IMRT QA) was peformed to develop a new optimization method of film isocenter offset and to then suggest new quantitative criteria for film dosimetry. Materials and Methods: Film dosimetry was peformed on 14 IMRT patients with head and neck cancers. An optimization method for obtaining the local minimum was developed to adjust for the error in the film isocenter offset, which is the largest part of the systemic errors. Results: The adjust value of the film isocenter offset under optimization was 1 mm in 12 patients, while only two patients showed 2 mm translation. The means of absolute average dose difference before and after optimization were 2.36 and $1.56\%$, respectively, and the mean ratios over a $5\%$ tolerance were 9.67 and $2.88\%$. After optimization, the differences in the dose decreased dramatically. A low dose range cutoff (L-Cutoff) has been suggested for clinical application. New quantitative criteria of a ratio of over a $5\%$, but less than $10\%$ tolerance, and for an absolute average dose difference less than $3\%$ have been suggested for the verification of film dosimetry. Conclusion: The new optimization method was effective in adjusting for the film dosimetry error, and the newly quantitative criteria suggested in this research are believed to be sufficiently accurate and clinically useful.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.5
• /
• pp.87-92
• /
• 1985

A simple method to derive EID function which is necessary to compensate for the pro-ximity effect in electron-beam lithography is presented. Using optimization techniques, parameters of EID function is derived and well agreed with experimental valuta.

• Journal of Navigation and Port Research
• /
• v.26 no.5
• /
• pp.543-548
• /
• 2002

It has been known that the DCMP(Directionally Constrained Minimization of Power) and the ZF(Zero Forcing) can improve the SINR performance of an array antenna system by using spatial signature of wireless channel. This paper analyzes the performance of DCMP and ZF in multiple scattering environments. To obtain the spatial signature of wireless channel. both DOA(Directional of Arrival) and AS(Angular spread) of the received signals were estimated by using ESPRIT. The performance of the DCMP and the ZF was analyzed theoretically. By computer simulation of SINR performance was evaluated.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.6
• /
• pp.113-122
• /
• 2003

Topology optimization is begun with layout optimization that is attributed to Rozvany and Prager of the 1960's. They claimed that structure was transformed into truss connecting all the nodes of finite element and optimized by control of its sectional modulus. But, this method is partial topology optimization. General layout optimal design appliable to continum structure was proposed by Bendsoe and Kikuchi in 1988. Topology optimization expresses material stiffness of structure into function of arbitrary variable. If this variable is 1, material exists but if this variable is 0, material doesn't exist. Therefore, topology optimization searches the distribution function of material stiffness for structure. There are a few researchs for simple engineering problem such as topology optimization of square plane structure or truss structure. So, This study applied to topology optimization of table liner for vertical roller mill that is the largest scale in the world. After table liner decreased by 20% of original weight, the structure analysis for first optimized model was performed.

• Computational Structural Engineering
• /
• v.8 no.1
• /
• pp.85-94
• /
• 1995

The optimum design of the cylindrical shell under external pressure loading is considered. The design variable is a skin thickness of the unstiffened parallel middle body shell. Overall buckling strength and direct stress and displacements constraints are considered in the design problem The optimum design is achieved with one of the standard nonlinear constrained optimization technique. A method for calculating the sensitivity coefficients is developed using the direct differentiation.