• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.149-158
• /
• 2007

Evaluation of the asphalt mixture modified with crumb rubber modifier(CRM) was performed to estimate possibility of using it as a paying material. OACs(optimum asphalt content) of CRM modified asphalt mixtures by dry process and wet process were determined by Marshall mix design and Wheel tracking test and moisture susceptibility test by freezing and thawing were carried out with CRM modified asphalt mixtures at OACs. The results from these tests, resistance of permanent deformation of CRM modified asphalt mixtures were superior to one of AP-5 while showing very low resistance of moisture sensitivity by freezing and thawing. This means that CRM modified asphalt mixtures are very sensitive to freezing and thawing. However, CRM modified asphalt mixture with anti-stripping material showed high improvement to resistance of moisture susceptibility by freezing and thawing. Therefore, it is recommended that when CRM mixtures were used in domestic, CRM modified asphalt mixtures should be with prevention against freezing and thawing resistance by moisture susceptibility.

• Resources Recycling
• /
• v.9 no.3
• /
• pp.37-45
• /
• 2000

This paper presents the experimental test results on moisture and freeze-thaw resistance of hot mix crumb rubber modified (CRM) asphalt concrete mixture. To compare the differences in mechanical properties of conventional and CRM asphalt concretes, various tests were conducted under different moisture conditions and freeze-thaw cycles. Marshall mix design was also performed to determine the optimum asphalt contents for the both asphalt concrete mixtures. Test results revealed that the moisture and freeze-thaw resistance of CRM asphalt mixture was superior to the conventional asphalt concrete. As a result, it is considered that the utilization of waste tires in asphalt pavements has the potential of minimizing the damage due to the moisture and freeze-thaw.

• International Journal of Highway Engineering
• /
• v.4 no.2 s.12
• /
• pp.9-18
• /
• 2002

The main distresses that influence pavement performance are rutting, fatigue cracking, and longitudinal roughness. Thus, it is important to analyze the factors that affect these three distresses, and to develop prediction models. In this paper, three distress prediction models were developed using DataPave program which stores data from a wide variety of pavement sections In the United States. Also, sensitivity studies were conducted to evaluate how the input variables impact on the distresses. The result of sensitivity study for the prediction model of rutting showed that asphalt content, air void, and optimum moisture content of subgrade were the major factors that affect rutting. The output of sensitivity study for the prediction model of fatigue cracking revealed that asphalt consistency, asphalt content, and air void were the most influential variables. The prediction model of longitudinal roughness indicated asphalt consistency, #200 passing percent of subgrade aggregate, and asphalt content were the factors that affect longitudinal roughness.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.178-178
• /
• 2011

도로소음은 다양한 소음원에 의해 발생하며, 도로를 이용하는 사람과 도로 주변사람에게 큰 불편을 초래한다. 보다 쾌적한 환경을 원하는 현대인에게 있어 도로 소음의 경감은 중요한 환경 공해로 작용한다. 도로 소음을 줄이기 위해서는 여러 가지 방법이 있을 수 있으며, 이 중 도로 포장의 개선을 통해 도로 소음을 경감할 수 있으며, 이와 같은 포장을 저소음 포장이라고 한다. 저소음 포장은 주행하는 차량의 타이어와 노면이 마찰하면서 발생하는 소음을 최소화하기 위한 것으로 소음 발생의 메커니즘을 바탕으로 하고 있다. 저소음 포장중 가장 널리 사용되고 있는 방법은 공극을 늘리는 것이다. 약 20%의 공극은 타이어와 노면 사이의 에어펌핑음을 최소화 하며, 소리를 흡수하는 역할로 약 3dB의 소음 가소 효과가 있는 것으로 알려져 있다. 소음을 감소시키는 또 하나의 방법은 노면의 표면 조직을 매끈하게 하여 타이어와 노면의 충격음을 줄이는 방법이다. 노면의 평탄성을 개선하기 위해 포장에 사용되는 골재의 최대크기를 줄이는 소입경 포장을 소음 가소의 목적으로 유럽 등지에서 많이 사용되고 있다. 본 연구에서는 이와 같은 저소음 기능을 위해 공극률을 크게 하고 소입경 골재를 사용하는 소입경 저소음 포장의 현장 적용을 위한 배합 설계를 수행하였다. 소입경 저소음 포장의 최대 골재 크기는 현장 적용성과 경제성을 고려하여 10mm 골재를 사용하였으며, 수도권에서 입수한 4곳의 산지 골재를 분석하여 골재 합성 입도를 산정하였다. 10mm 저소음 포장의 골재 입도 범위는 공극률 15~18%를 목표로 하며, 이를 만족하기 위하여 배합 설계를 수행한 결과 5mm 통과 중량 백분율이 약 30%로 하는 개립도가 적당한 것으로 나타났다. 공극이 증가함에 따라 포장의 내구성 향상을 위해 사용된 고점도 바인더는 아스팔트 혼합물의 생산 및 시공온도를 증가시키게 된다. 또한 굵은골재의 비율이 높은 개립도 아스팔트 혼합물의 경우 운반과정과 포설 과정에서 온도가 빨리 떨어지는 단점이 있다. 이를 극복하기 위하여 중온 첨가제의 사용을 통해 생산 및 다짐온도를 낮추고자 하였다. 소입경 저소음 포장의 배합설계 과정은 배수성 포장의 배합설계 과정과 유사하나, 칸타브로 손실률과 흐름실험의 변곡점을 기준으로 할 경우, 칸타브로 손실률과 흐름 손실률이 매우 작아 변곡점을 판단하기 어렵기 때문에 칸타브로 손실률과 흐름 손실률의 기준 만족 여부로 판별하고, 최적 아스팔트 함량은 공극률을 기준으로 산정하는 것이 바람직할 것으로 판단된다. 중온 첨가제를 사용할 경우는 중온 첨가제로 인한 점도의 변화를 감안하여 혼합 및 다짐 온도를 결정하고 배합 설계를 수행하며, 중온 첨가제의 특성과 양에 따라 최적 아스팔트 함량이 변화하게 된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.732-737
• /
• 2016

Using the pyrolyzed carbon black (PCB) from waste tires, the performance of 13 mm dense-graded hot mix asphalt was evaluated. The Marshall mix design was carried out and the measured optimal asphalt content was 5.8%. The impact resonant test was conducted to obtain the elastic modulus and damping ratio of the hot mix asphalt. The elastic modulus of HMA increased with increasing amount of PCB. On the other hand, there was no significant change in the damping ratio. The Marshall mix design, indirect tensile test, permanent deformation test, and program analysis were carried out. The strength ratio of the PCB modified asphalt mixtures was within 10%. More 10% of PCB was not good for the permanent deformation of hot mix asphalt. From the pavement design program, the use of 5% PCB in hot mix asphalt showed a decrease in the top-down crack, bottom-up crack, and permanent deformation. Judging from the limited test and analysis, the use of 5% PCB is good for enhancing the pavement performance.

• International Journal of Highway Engineering
• /
• v.2 no.4 s.6
• /
• pp.123-131
• /
• 2000

The compaction equipment and the Marshall stability head are the two important testing equipment for the Marshall test. The compaction equipment is closely related to the air void, VMA and compactability of the mixtures, and the stability head is related to the Marshall stability and the flow, therefore the size and the shape of the equipment is essential for finding the accurate optimum asphalt content for the asphalt mix design. However, the size and the shape of the equipment currently used and the condition of the installation of compaction pedestal in this country are different from each agency and manufacturer. The national inspection of the Marshall equipment is necessary because the difference can affect the test results and also the performance of the asphalt pavement.

• International Journal of Highway Engineering
• /
• v.6 no.2 s.20
• /
• pp.1-13
• /
• 2004

This study dealt with size effect of specimen in measuring deformation strength and estimating rut resistance of asphalt concretes under static loading using Kim test. Two aggregates, a normal asphalt (pen 60-80) and 6 polymer-modified asphalt (PMA) binders were used for preparation of 14 dense-graded mixtures. Mixtures were prepared based on optimum asphalt content by Marshall compactor (S= 10cm) and gyratory compactor (S= 15cm) for Kim test and for wheel tracking test. In statistical analysis by general linear model (GLM) procedure of SAS, the diameter of specimen was found not to be a significant factor that affect the Kim test result. Therefore, it was found that either loom-diameter or 15cm-diameter of specimen gave no significant difference in deformation strength ($K_D$) values in Kim test for any aggregate mixture. However, the thickness of specimen was found to be a significant factor in determining $K_D$. It is estimated that $K_D$ is a function of y, vertical deformation, and y has something to do with thickness of specimen. Therefore, it is suggested that the thickness of specimen should not be higher than 6.6cm, and the correction factor depending on the thickness value should be developed in the future study.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.2
• /
• pp.497-505
• /
• 2017

TDF (Tire derived fuel) Fly ash is an industrial by-product when scraped tire was used a fuel source at the power plant. TDF Fly ash has been classified as domestic waste at the workplace so far and has not been appropriately utilized. We conducted a fundamental physical property test of asphalt mixture to investigate the possibility of using TDF Fly ash as a mineral filler of asphalt mixture for exploring new usage strategies. TDF Fly ash meets KS F 3501 asphalt mixture mineral filler criteria. And the optimal asphalt binder amount was determined to be 4.5% by Marshall design. Mineral filler content was determined at 3% and analyzed by comparing using mineral filler as stone powder. The basic physical property test of the asphalt mixture was evaluated to the provision indicated in "Production and Construction Guidelines for Asphalt Mixture" published by the Ministry of Land, Infrastructure and Transport. In the test, Marshall stability test, dynamic immersion test, tensile strength ratio test, wheel tracking test were carried out. As a result of the experiment, Marshall stability and dynamic stability satisfied the standards, and confirmed the stability and Dynamic immersion and tensile strength ratio test that TDF Fly ash is more effective for scaling and moisture resistance than stone dust. Therefore, in this research, it is expected that multilateral utilization of TDF Fly ash, and a positive effect can be also expected.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.4
• /
• pp.611-619
• /
• 2018

Basalt powder sludge (abbreviated BPS) is an inevitable industry by product resulted from the stone processing. Recently, demands for natural materials have been increasing in the construction and landscaping fields, therefore, amounts of BPS have been also increasing. Since most of BPS are used as landfill and earth soil, it is necessary to figure out to expedite their utilization. In this study, by considering the characteristics of precipitation of Jeju, effectiveness of BPS as a filler for asphalt compounds mixed with cement were analyzed. As a result, BPS satisfies quality criterion required in KS F 3501. Marshall mixing designs were performed to determine the optimal asphalt content for the Modified recycling asphalt mixture (27% recycling aggregate) and the Normal asphalt mixture. Effectiveness of BPS were identified by the Marshall Stability Test with the mixing ratio (level 3) of two asphalt compounds and composition ration (level 3) of BPS and cement. Performance of asphalt compounds shown appropriate effect of mixing and composition ratios of the filler were assessed. Test results show that two types of asphalt compounds satisfy the quality standards of the MLIT (2015). Therefore, BPS could be used as filler for asphalt compounds.

• International Journal of Highway Engineering
• /
• v.8 no.1 s.27
• /
• pp.15-23
• /
• 2006

Criteria of the current asphalt mix design, Marshall method, includes the stability and flow which are not related with field performance of HMA mixture, together with the air void, Void filled with asphalt (VFA) and/or Void of mineral Aggregate(VMA). In addition, the limits of stability and flow are satisfied in most cases, the Optimum asphalt content (OAC) is determined based on volumetric properties, such as the air void and/or VFA and/of VMA. Therefore, many researchers have sought mechanistic properties which can replace the stability and flow, making the designed mixture having potential for better field performance. This study initiated to develope a mix design by introducing two performance-related mechanistic properties, the deformation strengh and fracture energy, in place of the stability and flow of the Marshall method. The deformation strength $(S_D)$ from the Kim Test has a high correlation with rutting property and the fracture energy(FE) from the indirect tensile test represents the fatigue cracking property of asphalt mixture. Four types of asphalt mixture were prepared for examining possibility of using the suggested mix design method in comparison with current methods. The results showed that mechanical properties were reflected in determination of OAC with this suggested mix design, unlike the existing Marshall method.