• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.65-72
• /
• 2000

The study investigated the effects of base curve radius art the fit of thin, mid-water contact lenses. It was found that central corneal curvature(as measured with the keratometer) was not predictive of the best fitting base curve. Proper lens fit may be the single most important factor that ultimately determines the success of contact lens wear. Comfort, vision, and physiological response are all dependent on the fit of the lens. The percent of optimal fits was highest with the 8.4 mm base curve lens for all three ranges of keratometry values. When fit with the 8.4 mm lens. For most eyes, fitting a flatter lens led to greater decentration, decreased comfort, and no increase in lens movement. The 8.4 mm lens was found to provide on "optimal" fit in over 60% of eyes tested and a fit of "good" or "better" in nearly 90% of eyes tested. Comparisons of different manufactures' lens found that similiar lenses do not always fit in the same way due to subtle design and production differences. Therefore, different products may require different base curve radii to fit the same patient. This is even true when water content, center thickness, and diameter are approximately the same. A praditioner fitting a new patient in this lenses should begin with the 8.4 mm base curve radius.

• Journal of the Korea Convergence Society
• /
• v.8 no.7
• /
• pp.219-224
• /
• 2017

This paper investigates equivalent stress and deformation happening at inner fiber structure when the tensile force acts on the specimen with arch type composed of carbon fiber. The countless many each fiber is applied on the unidirectional axis at CFRP and has the high specific strength and stiffness by comparing with iron. In this study, the distribution of stress due to radius is investigated at the structure of arch type composed with the optimum stacking angle of $60^{\circ}$. And the durability is seen to be lower as the radius increases at the same stacking angle. By applying the result of this study to the design of structure with arch type, it can be devoted to the safe design for the prevention of damage and the durabilty improvement. And it is possible to be grafted onto the convergence technique at the designed factor and show the esthetic sense.

• Journal of the Korean Institute of Gas
• /
• v.16 no.2
• /
• pp.38-44
• /
• 2012

In recent years, the need for more fuel-efficient and lower-emission vehicles has driven the technical development of alternative fuels such as LPi (Liquid phase LPG injection) which uses pump for the high pressure supply of liquid LPG fuel and is able to meet the limits of better emission levels while it has an advantage of higher power. Although it has the advantage of power and lower emission levels, the characteristics of LPG, such as high vapor pressure, lower viscosity and surface tension than gasoline fuels makes it difficult design system. Therefore most fuel pumps and injectors are imported. In the present study, in order to domestically develop LPG injector which guarantees flow rates and optimal operation, the experimental investigation on leakage and flow rate characteristics of developed prototype injector was carried out at the bench test rig for developed injector.

• Journal of Digital Convergence
• /
• v.11 no.10
• /
• pp.437-443
• /
• 2013

This thesis enhanced the degree of utilization of smart phone through carrying out the application/app. which search and visit matjip (reputable restaurant) at the travel sites using smart phones. When we search matjip (reputable restaurant) using materialized application, we can select the best matjip (reputable restaurant) we want. Especially, this application evaluates individual restaurants through the level of utilization and satisfaction by consumer including appropriate menus, the style and design of the restaurant, reasonableness of prices, service of restaurant employees and sanitation management by region and registered the information input to DB in advance while classifying based on the evaluation scores to keep track for individual tastes. And individuals can record their personal memories to input columns. On top of that, information field for transportation is also designed to enhance the accessibility during travel, and in the future the application can be further utilized through the expansion of the DB through the input of famous tour sites and acquaintance's house information.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.57-65
• /
• 2014

This paper presents a framework that is based on a reconfigurable macro-model of current-mode logic (CML) high-speed digital circuits enabling equation-based design optimization. The proposed macro-model is compatible with geometric programming, thereby enabling constraint-driven top-level power optimization. The proposed optimization framework is applied to a design of CML based serial-link transmitter with user-defined design specifications as an example of high speed digital circuits using 45nm and 90nm CMOS technology. The proposed optimization framework can derive a design with optimal power efficiency for given transistor technology nodes.

• Journal of the Korean Vacuum Society
• /
• v.19 no.3
• /
• pp.190-198
• /
• 2010

Asymmetric model for plasma uniformity by Ar and $CF_4$ was modeled by the antenna structure, the diameter of chamber, and the distance between source and substrate for the development of plasma equipment for 450 mm wafer. The aspect ratio of chamber was divided by diameter, distance from substrate, and pumping port area. And we found the condition with the optimized plasma uniformity by changing the antenna structure. The drift diffusion and quasi-neutrality for simplification were used, and the ion energy function was activated for the surface recombination and etching reaction. The uniformity of plasma density on substrate surface was improved by being far of the distance between substrate wall and chamber wall, and substrate and plasma source. And when the antenna of only 2 turns was used, the plasma uniformity can improve from 20~30% to 4.7%.

• Journal of the Korea Convergence Society
• /
• v.8 no.6
• /
• pp.227-235
• /
• 2017

The essence of architecture is space acquired as a result of architect's design act, but the object of the design is not the space and it is the physical elements to construct it. The masters of modern architecture have described the types of spaces that can be composed of these elements, but there is a difficulty in constructing the space because they does not mention how to construct it. From this point of view, if architecture is the techniques for human behavior and the art of building space, it is recognized that there is a need for concrete research on how to construct a space with ambiguous substance. Therefore, I conducted research on the extensibility of diagonal spaces through '4 Logements Studio' by Henri Ciriani, a representative architect of Neo Corbusian. The 'network for identity' method proposed by Ciriani was examined as a methode to realize spatial expansion and the furniture should be designed as an element of reading space and 3 optimal alternatives for 4 housing arrangements were obtained based on the Equivalence, Lighting, View, and Community life.

• Analytical Science and Technology
• /
• v.11 no.1
• /
• pp.1-7
• /
• 1998

This study focuses on developing a controlling and analyzing software for the portable atomic emission spectrometer equipped with an electrothermal vaporizer(ETV) that can perform the in-situ trace analysis of heavy metal ions dissolved in water. The software works well for a notebook PC and it is exclusively developed for the real time analysis with a line filter and a photomultiplier light detector. The program is designed to operate under Windows 95 environment and either Korean or English can be used as a main language. The Delphi 2.0 language software is mainly used for programing. The program is designed to make a calibration curve and the system users can get the analytical data in a short time. And a final report can be generated without having difficulties. This software can be easily modified for other analytical atomic spectrometers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.5789-5794
• /
• 2015

Recently, thin and light-weight production technologies are needed in IT industry in accordance with increase of the smart phones and mobile PC products. In order to make light and high rigidity products, engineering plastic and aluminum materials are frequently used in products appearance and frame hat support structure. Especially aluminum extrusion and CNC Brick processes are widely used for high strength and high rigidity technology. But extrusion method has constraints to apply exterior design and CNC Brick process has relatively high production cost and low speed of manufacturing. In this research, a new process method is introduced in order to reduce material cost and to improve manufacturing speed dramatically. Plate forging process means basically that thickening of local wall area thickness after deform exterior shape by deep drawing and bending process. Therefore, it is possible to minimize the waste of material and the manufacturing time. In this study the process of plate forging is designed using finite element program AFDEX-2D and the thickness and the width of initial deformed blank. And it is verified as a sample which is a part of laptop developed through the proposed plate forging method.

• Journal of Science and Technology Studies
• /
• v.16 no.2
• /
• pp.33-63
• /
• 2016

This paper compares and contrasts the concept of nature and the theory of evolution held by leading synthetic biologists and transhumanists in the post-genomic era. Synthetic biology, which emerged in the early 2000s, aims to design biological systems that perform specific functions with the two key concepts of "rational design" and "directed evolution". However, synthetic biology has also raised serious concerns about the creation of man-made biological materials and the manipulation of the direction and speed of evolution. It is no wonder that transhumanists, who dream of creating new, enhanced human species, have welcomed the arrival of synthetic biology. How, then, can we deal with the nature reinvented by synthetic biology? By what means can one justify research that may affect the process of evolution? What intellectual resources do synthetic biology and transhumanism share in common? What influence would the new trend of commercialization of science and technology exert upon the development of synthetic biology? Addressing those questions, this paper argues that the moral authority of nature can be restored in this post-genomic era.