• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.3-8
• /
• 2013

Conventional MMSE beamforming scheme shows better performance than ZF or MF beamforming, but it does not aim increase of sum rate. This paper proposes sum rate maximizing scheme by representing sum rate as a function of weighted MSE. Proposed scheme increases sum rate iteratively by updating weights and beam whose initial form is conventional MMSE beam. Simulation result shows sum rate of proposed scheme is higher than those of conventional schemes and increases as the number of users increases.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.3
• /
• pp.49-56
• /
• 2012

Performance analysis on RAIM, which is one of the techniques for monitoring integrity to ensure the reliability of GPS, was conducted in this study. RAIM is such a method which allows its user to monitor integrity in the stand-alone mode. Among the existing RAIM procedures, the representative methods including the RCM (Range Comparison Method), LSRM (Least Square Residual Method), Parity approach and WRAIM (Weighted RAIM) were evaluated, and their performance was analyzed. To validate the performance of the implemented algorithms, fault detection was tried on the clock malfunctioning event of PRN 23 occurred on January 1st, 2004. As a result, it was identified that the LSRM and the WRAIM detected all the faults happened in the event. In the case of RCM, all the states of fault were detected except for the error which occurred as a false alarm at one epoch. Furthermore, simulated biases were added for each satellite to analyze the sensitivity of each algorithm. Consequently, when biases of the 9-13 meters range were simulated for the RCM and LSRM algorithm, all the malfunctions were detected. For the WRAIM method, it could detect range biases greater than 15 meters.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.156-160
• /
• 2002

실험적 베리오그램의 모델링에 SA(Simulated Annealing)기법을 이용하였다. 최소 자승법의 해를 구하기 위하여 기존의 상용 프로그램에서 많이 이용되고 있는 반복법에 근거한 방법에 비해서 SA 기법은 초기 가정값에 크게 영향을 받지 않고 일정한 모델 인자의 값을 제시하였다. 임의의 초기 가정값을 입력하여도 충분한 반복 계산을 통하여 목적함수의 값이 광역적 최소값으로 수렴하는 것을 확인할 수 있었다. 베리오그램 모델이 일반적으로 비선형 모델이기 때문에 목적함수의 지역적 최소값으로의 수렴이 문제가 되고 이로 인하여 구해지는 인자의 값이 정확하지 않을 수 있지만 SA 기법을 이용하여 최소 자승법의 해를 구하게 되면 정확한 인자의 값을 구할 수 있음을 확인하였다.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.4
• /
• pp.311-315
• /
• 2013

본 논문에서는 주성분 회귀법과 부분최소자승 회귀법을 비교하여 보여준다. 이 비교의 목적은 선형형태를 보유한 근적외선 분광 데이터의 분석에 사용할 수 있는 적합한 예측 방법을 찾기 위해서이다. 두 가지 데이터 마이닝 방법론인 주성분 회귀법과 부분최소자승 회귀법이 비교되어 질 것이다. 본 논문에서는 부분최소자승 회귀법은 주성분 회귀법과 비교했을 때 약간 나은 예측능력을 가진 결과를 보여준다. 주성분 회귀법에서 50개의 주성분이 모델을 생성하기 위해서 사용지만 부분최소자승 회귀법에서는 12개의 잠재요소가 사용되었다. 평균제곱오차가 예측능력을 측정하는 도구로 사용되었다. 본 논문의 근적외선 분광데이터 분석에 따르면 부분최소자승회귀법이 선형경향을 가진 데이터의 예측에 가장 적합한 모델로 판명되었다.

• The KIPS Transactions:PartA
• /
• v.16A no.2
• /
• pp.61-68
• /
• 2009

We present a fast 3D shape deformation method that achieves smoothly deformed result by approximating a rigid transformation based on moving least squares (MLS). Our modified MLS formulation reduces the computation cost for computing the optimal transformation of each point and still keeps the rigidity of the deformed results. Even complex geometric shapes are easily, intuitively, and interactively deformed by manipulating point and ellipsoidal handles.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.12
• /
• pp.2353-2362
• /
• 2015

In this paper, we employ the single channel full duplex radio for wireless local area network (WLAN) systems, and design digital interference cancellers using adaptive signal processing. When the full duplex scheme is used for WLAN systems with multiple transmit and receive antennas, some interference is caused through the feedback of transmit signals from multiple antennas. To remove the feedback interference, we derive the least mean square (LMS), normalized LMS (NLMS), and recursive least squares (RLS) algorithms based on adaptive signal processing techniques. In addition, we analyze the theoretical convergence of the proposed LMS and RLS methods. The channel capacity of full duplex radios increases by two times than that of half duplex radios, when the packet error rate (PER) performances for the two systems are identical. Through numerical simulations in WLAN systems, it is shown that the full duplex method with the proposed interference cancellers has a similar PER performance with the conventional half duplex transmission scheme.

• Journal of the Korean Data and Information Science Society
• /
• v.22 no.5
• /
• pp.931-940
• /
• 2011

Classification is to generate a rule of classifying objects into several categories based on the learning sample. Good classification model should classify new objects with low misclassification error. Many types of classification methods have been developed including logistic regression, discriminant analysis and tree. This paper presents a new classification method using penalized partial least squares. Penalized partial least squares can make the model more robust and remedy multicollinearity problem. This paper compares the proposed method with logistic regression and PCA based discriminant analysis by some real and artificial data. It is concluded that the new method has better power as compared with other methods.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.5
• /
• pp.438-447
• /
• 2008

This study is focused on reliability based design optimization (RBDO) using moving least squares. A response surface is used to derive a limit-state equation for reliability based design optimization. Response surface method (RSM) with least square method (LSM) or Kriging will be used as a response surface. RSM is fast to make the response surface. On the other hand, RSM has disadvantage to make the response surface of nonlinear equation. Kriging can make the response surface in nonlinear equation precisely but needs considerable amount of computations. The moving least square method (MLSM) is made of both methods (RSM with LSM+Kriging). Numerical results by MLSM are compared with those by LMS in Rosenbrock function and six-hump carmel back function. The RBDO of engine duct of smart UAV is pursued in this paper. It is proved that RBDO is useful tool for aerospace structural optimal design problems.

• Korean Journal of Optics and Photonics
• /
• v.4 no.4
• /
• pp.363-372
• /
• 1993

An optimization technique with variable orthogonalization and SVD(singular value decomposition) is examined in a double-Gauss type photographic lens design and its convergence and stability are compared with ordinary least squares and DLS(damped least squares) method. It is known that there are close relationship between the stability of optimization and condition number of nomal equation, the ratio between maximum and minimum of eigenvalues. In this study, the stability is greatly improved by limiting the condition number, the SVD, as expeded. The case of DLS with small damping, orthogonalization and SVD shows the most rapid convergence and stability. It means that the unstability of DLS method with small damping is overcome by using the variable orthogonalization and SVD.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.5
• /
• pp.370-375
• /
• 2004

This paper proposes an algorithm that estimates three dimensional array shape calibration about the bottom-mounted sensor array. under the assumption that the active sources are in the far-field with unknown positions. Under some assumptions. we calculate the sensor positions via an algebraic solutions of a least squares problem that the linear equations are related to the sensor positions and directions or arrival. We give examples of algorithm performance from both computer simulations and sea test. We also illustrate the performance of sensor positions estimation as a function of time delay estimation variance and the distribution of the localizing sources.