• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.11a
• /
• pp.150-151
• /
• 2011

최근 25년간(1986-2010년)의 우리나라 기상청 및 일본 기상청 자료를 사용하여 엘니뇨 라니냐 현상과 태풍과의 관계를 분석하였다. 특히, 이번 연구에서는 태풍의 세기에 주목하여 분석하였다. 주요 연구 결과는 다음과 같다. 태풍의 세기를 나타내는 평균 중심최저기압과 평균 최대풍속은 엘니뇨 발생년에 959.3hPa과 35.8m/s, 라니냐 발생년에 965.5hPa과 33.7m/s 그리고 25년 전 기간에 대하여는 962.3hPa과 35.0m/s이었다. 즉, 엘니뇨 발생년의 태풍의 세기가 라니냐 발생년의 태풍의 세기보다 강함을 알 수 있다. 구체적으로 평균 중심최저기압은 약 6hPa 낮고, 평균 최대풍속은 2.1m/s 강하다. 이와 같은 결과는 태풍의 발생 해역과 밀접히 관련되어 있다. 즉, 엘니뇨 발생년에 태풍은 동경 150도 이동 해역과 북위 10도 이남 해역에서 상대적으로 더 많이 발생하고, 라니냐 발생년의 태풍은 동경 150도 이서 해역과 북위 20도 이북 해역에서 더 많이 발생한다. 동경 150도 이동 해역과 북위 10도 이남 해역에서 발생한 태풍은 북태평양의 광범위한 고수온역을 보다 장시간 이동하게 되므로 더 강하게 발달할 수 있다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.6
• /
• pp.852-857
• /
• 2010

As the wind has become one of the fastest growing renewable energy sources, the key issue of wind energy conversion systems is on how to efficiently operate the wind turbines in a wide range of wind speeds. In general, the wind speed is the main factor that impact on the dynamics of wind turbine system. Wind turbine algorithms are thus required to improve the performance of wind speed measurements. However, the accurate measurement of the effective wind speed using wind gauge and similar sensors is difficult such that control systems are needed for wind speed estimation using various techniques. Therefore, this research suggests the Maximum Power Point Tracking (MPPT) method for tracking the wind speed based on neural networks. Design experiments were carried out in laboratory environment to validate the application of the proposed method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.92-99
• /
• 2016

A wind turbine is controlled for the purpose of obtaining the maximum power below its rated wind speed. Among the methods of obtaining the maximum power, TSR (Tip Speed Ratio) optimal control and P&O (Perturbation and Observation) control are widely used. The P&O control algorithm using the turbine power and rotational speed is simple, but its slow response is a weak point. Whereas TSR control's response is fast, it requires the precise wind speed. A method of measuring or estimating the wind speed is used to obtain a precise value. However, estimation methods are mostly used, because it is difficult to avoid the blade interference when measuring the wind speed near the blades. Neural networks and various numerical methods have been applied for estimating the wind speed, because it involves an inverse problem. However, estimating the wind speed is still a difficult problem, even with these methods. In this paper, a new method is introduced to estimate the wind speed in the wind-power graph by using the turbine power and rotational speed. Matlab/Simulink is used to confirm that the proposed method can estimate the wind speed properly to obtain the maximum power.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.1
• /
• pp.53-62
• /
• 2016

Extreme wind speeds at four sites including Mokpo, Gunsan, Incheon and Jeju near the Western Coast have been estimated with a tool of Monte Carlo simulation and typhoon data. Results of sensitivity analysis show that closeness between distance to the eye and the radius to maximum wind is most sensitive. While location angle and pressure deficit are sensitive too, but translation velocity is not. A standard typhoon, which results in extreme wind speeds having various return period, can be constructed by combination of parameter informations of each site. Then, with a numerical modelling of the typhoon, extreme surge heights having the same return period can also be obtained. To be added, by analysing the data which only including those based on navigable semicircle, it is possible to produce a standard typhoon which could result in setting-down of sea level.

• Current Research on Agriculture and Life Sciences
• /
• v.31 no.4
• /
• pp.280-285
• /
• 2013

This study supplies basic data to develop a greenhouse model for reducing the damage to single-span greenhouses caused by strong winds and heavy snow. Single-span plastic greenhouses are predominantly used for growing crops in Korea. Thus, the safety wind speeds for single-span greenhouses were calculated and compared with the actual wind speeds and snow depths over a period of 8 years in different regions to analyze the structural safety of single-span greenhouses. The unit wind load and unit snow load were applied to different designs of single-span greenhouse according to the cultivated crop to achieve a structural analysis. As a result, the maximum section force for the wind and snow load was greatest for leaf and root vegetables, where the safety wind speeds for single-span greenhouses according to the cultivated crop were 17.7 m/s(leaf vegetables), 20.2 m/s (fruit vegetables), and 22.3 m/s (root vegetables). Thus, the single-span greenhouses were not found to be safe for the wind load in most regions, except for Hongcheon, Icheon and Sungju. Plus, the safety snow depths for single-span greenhouses according to the crop were 8.8 cm (leaf vegetables), 9.4 cm (fruit vegetables), and 11.8cm (root vegetables). Thus, when comparing the safety snow depths with the actual snow depths, the single-span greenhouses were not found to be safe. Therefore, to improve the safety of single-span greenhouses, the structures need reinforcement by reducing the interval between rafters or increasing the size of the pipes. However, additional research is needed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.1
• /
• pp.16-24
• /
• 2014

Long-term measured wind data are absolutely necessary to estimate extreme offshore wind speed. However, it is almost impossible to collect offshore wind measured data. Therefore, typhoon simulation is widely used to analyze offshore wind conditions. In this paper, 74 typhoons which affected the western sea of Korea during 1978-2012(35 years) were simulated using Holland(1980) model. The results showed that 49.02 m/s maximum wind speed affected by BOLAVEN(1215) at 100 m heights of HeMOSU-1 (Herald of Meteorological and Oceanographic Special Unit - 1) was the biggest wind speed for 35 years. Meanwhile, estimated wind speeds were compared with observed data for MUIFA, BOLAVEN, SANBA at HeMOSU-1. And to estimate extreme wind speed having return periods, extreme analysis was conducted by assuming 35 annual maximum wind speed at four site(HeMOSU-1, Gunsan, Mokpo and Jeju) in western sea of the Korean Peninsular to be Gumbel distribution. As a results, extreme wind speed having 50-year return period was 50 m/s, that of 100-year was 54.92 m/s at 100 m heights, respectively. The maximum wind speed by BOLAVEN could be considered as a extreme winds having 50-year return period.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1468-1469
• /
• 2008

기상관측 분야에서는 풍속센서의 소형화 요구가 커지고 있어 Air flow sensor를 이용한 MEMS(Micro Electro Mechanical System) 풍향 풍속센서의 응용연구가 활발하다. MEMS 풍향 풍속 센서는 수 mm 크기를 가지면서도 바람의 세기와 함께 방향을 측정하여야 하는데, 센서 칩이 노출되어 있어 외부환경으로부터 영향을 받기 때문에 센서소자의 내오염성과 내구성 확보가 중요하다. 따라서 본 연구에서는 절연막으로 비점착성의 테프론 막을 적용하여 외부환경으로부터 영향을 줄일 수 있는 열감지 방식의 MEMS 풍향 풍속 센서 칩을 제작하였다. 테프론 코팅막을 이용한 풍향 풍속 센서는 0.1m/s의 resolution을 가지며, 최대 15m/s까지 측정이 가능하여, 오염에 강하고 발수성을 센서를 제작하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.5
• /
• pp.291-300
• /
• 2013

Typhoon simulation method is widely used to estimate sea surface wind speeds during the typhoon periods. Holland (1980) model has been regarded to provide relatively better results for observed wind data. JTWC or RSMC best track data are available for typhoon modeling, but these data show slightly different because the data generation process are different. In this paper, a Newton-Raphson method is used to solve the two nonlinear equations based on the Holland model that is formed by the two typhoon parameters, i.e. the longest radius of 25 m/s and 15 m/s wind speeds, respectively. The solution is the radius of maximum wind speed which is of importance for typhoon modeling. This method is based on the typhoon wind profile of JMA and it shows that Holland model appears to fit better the characteristics of typhoons on the temporal and spatial changes than that of the other models. In case of using RSMC best track data, the method suggested in this study shows better and more reasonable results for the estimation of radius of maximum wind speed because the consistency of the input data is assured.

• 한국데이터정보과학회:학술대회논문집
• /
• 2003.10a
• /
• pp.129-137
• /
• 2003

최근 30년간(1071-2000) 북동기류 유입시 목포지방 최고기온의 예측을 위하여 북동기류 유입시 통계적 특성을 분석하였다. 분석 내용은 최대풍향 발생빈도, 최고기온 및 풍속, 풍속별 최고기온, 전일 최고기온과 교차분석, 풍속별 최고기온 분석 및 전운량(하늘상태) 분석 등이다. 분석결과 계절에 따라 변화는 있으나 북동기류의 유입으로 인한 기온의 변화 경향에 몇 가지 특성을 발견할 수 있었다.

• Computational Structural Engineering
• /
• v.3 no.2
• /
• pp.109-115
• /
• 1990

The probabilistic characteristics of wind loads have been analyzed using statistical data on wind speeds, pressure coefficient, exposure coefficient, and gust factor. The wind speed data collected at 25 nationwide weather stations have been modified to be consistent in measuring height, exposure condition as well as averaging time. Having performed Monte Carlo simulation for various heights and site conditions, the statistical models of wind loads were determined, in which Type-I extreme value distribution has been applied. The models also incorporate a reduction factor of 0.85 to account for the reduced probability that the maximum wind speed will occur in a direction most unfavorable to the response of structure.