• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.5
• /
• pp.537-543
• /
• 2012

In this study, we experimentally investigate a noise mechanism related to the machining accuracy of the reducer in the driving state. We fabricate a planetary reducer and four types of gears for use in the planetary reducer. We use signal analysis to determine the noise and vibration of the reducer at different motor speeds; the motor speed is increased from 0 rpm to the maximum speed in a stepwise manner. In addition, we obtain the sound level by using a sound level meter. The machining accuracy of gears is evaluated by public organizations, Korea Testing Laboratory (KTL), on the basis of the Japanese Industrial Standard (JIS). We analyze and compare the results with the noise and vibration of the reducer.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.6 s.360
• /
• pp.28-33
• /
• 2007

The front-end system having a capable of 2x reading and writing of BD-R/Ra/ROM is developed. Its readability is improved by adopting 5-tap adaptive partial response maximum likelihood (PRML) with the PR(a,b,c,d,e) type channel. Due to the proposed PRML, less than $2{\times}10^{-4}$ of the bit error rate (BER) is achieved with radial and tangential tilt margin of over${\mp}0.6{\circ}$ on 25GB disc in 2x speed. The method of an optimum Power control (OPC) for stable writing of various BD-R/RE is proposed. The developed chip contains 14-million transistors in a $60mm^2$ dies, and is fabricated in $0.18-{\mu}m$ CMOS technology.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.1
• /
• pp.157-163
• /
• 2017

This system is a diagnosis system that checks whether it causes a partial discharge of a power cable or not. PD(Partial Discharge) is detected by FBDS(Frequency Band Detection Sensor). That is, it means a acoustic sensor capable of detecting each frequency band. The wave shape of PD sound is similar to noise and is systematically generated by partial discharge. Therefore, in this paper, we could discriminate between normal and abnormal case using relative level crossing rate(RLCR) and spectrogram of frequency energy rate.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.10 s.113
• /
• pp.985-992
• /
• 2006

The classic routing algorithms try to minimize the number of hops to reach a destination. In our DPC(Distributed Power Control) this hop-by-hop power level selection is also used to select the path guaranteeing low energy consumption. The main goal is to realize a dynamic protocol able to be aware of mobility and to automatically set security threshold in order to get the best performance in every situation. In conclusion, the simulation DPC has improved energy gain of the AMRIS routing algorithm at the narrow area, and ODMRP routing algorithm has improved energy gain at the wide area.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.788-792
• /
• 2007

국내외의 자동차 메이커는 고효율, 저공해 자동차 개발에 집중하고 있으며, 그 방법으로 하이브리드 자동차가 최우선시 되고 있다. 하이브리드 자동차의 밧데리 팩을 구성하는 핵심 부품 중 하나인 고전압 직류 릴레이는 주행 중 엔진 구동력을 보조하는 구동모터에 전기 에너지를 공급하는 밧데리의 출력을 개폐하는 기기이다. 고전압 직류 릴레이의 개폐 동작시 발생하는 소음은 자동차 운전 중 실내로 유입되어 운전자의 승차감을 떨어뜨리는 요인이 되므로 릴레이의 개폐 동작시 발생하는 소음 저감을 위한 연구가 필요하다. 본 연구에서는 폐로(ON) 동작시 발생하는 소음 저감을 위해 소음원인 충격력을 감소시키기 위한 이중 접압스프링 구조를 제안하였으며, 소음 저감 성능평가를 수행하였다. 먼저 정확한 충격해석을 위해 고전압 직류 릴레이의 최소 동작 전압인 5.9V부터 상시 인가 전압인 12V까지 총 6개의 전압레벨에서 릴레이의 전자력을 측정하였으며, 기존 접압스프링 구조와 이중 접압스프링 구조에 관하여 외연적 탄소성 유한요소 프로그램인 LS-DYNA를 사용하여 충격해석을 수행하였다. 고전압 직류 릴레이의 소음원인 가동전극과 고정전극에서 발생하는 일차 충격력과 가동철심과 고정철심에서 발생하는 이차 충격력을 비교, 평가하였다.

• Proceedings of the KIPE Conference
• /
• 2001.12a
• /
• pp.139-143
• /
• 2001

Recently, the interest on power quality has been hot issue. The equipments cause voltage disturbance and has become more sensitive to the voltage disturbance. This paper deals with 5-Level H-Bridge Line-Inter active Dynamic Voltage Restorer(LIDVR) system. The LIDVR has following advantages in comparison with the DVR with series injection transformer It has the power factor near to unity under normal source voltage, can compensate the harmonic current of the load and the instant interruption, and has the fast response. First, the construction, the operation mode and algebraic modeling of LIDVR are reviewed. And then a voltage controller is proposed to get sinusoidal load voltage with constant amplitude. To find PWM method suitable for H-Bridge converter, two PWM methods are compared and analyzed. Finally, simulation results verify the proposed 5-level H-Bridge LIDVR system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.280-282
• /
• 2017

최근 소프트웨어에 내장된 취약점 분석을 위한 자동화 도구 개발 연구가 각 분야에서 활발히 연구되고 있다. 그 중 바이너리 코드를 대상으로 바로 보안취약점을 분석하는 방법이 아닌 중간언어를 활용하여 분석하는 방법이 대두되고 있으며 이를 위한 다양한 중간언어가 제시되었다. 그 중 하이레벨 언어 수준의 내용의 기술이 가능하며 명령어 자체적으로 자료형을 유지하여 보안 취약점 분석에 효과적인 언어로 SIL 중간언어가 재조명 받고 있다. 따라서 본 논문에서는 이룰 위해서 x86/64 기반 어셈블리어를 SIL 로 효과적으로 변환하며 프로그램의 의미가 변하지 않는 것을 확인하기 위해서 프로그램의 제어흐름을 시각화하는 기능을 가진 시스템을 제안한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7277-7282
• /
• 2014

In this study, the gradient descent algorithm was used for FLC analysis and the algorithm was used to represent the effects of nonlinear parameters, which alter the antecedent and consequence fuzzy variables of FLC. The controller parameters choose the control variable by iteration for gradient descent algorithm. The FLC consists of 7 membership functions, 49 rules and a two inputs - one output system. The system adopted the Min-Max inference method and triangle type membership function with a 13 quantization level.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.3
• /
• pp.332-340
• /
• 2003

XML is an emerging internet standard for data representation and exchange on the web. Recently, many researches on storing XML documents are in progress. Since XML documents have an implicit semantic schema, it is difficult to store XML data into a DBMS or File System. This paper introduces XDOM, object repositories for the DOM object, which stores an object for persistency support. As XDOM does not require the burdensome design of a fixed schema unlike the legacy DBMS, can store schema-less XML documents. And it can help XML applications to access the DOM object transparently from the object repositories below memory. XDOM introduced in this paper is implemented in pure Java and evaluated using experiments.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.6
• /
• pp.500-506
• /
• 2012

In this paper, a non-isolated high step-up and high efficiency boost converter is proposed. By using the 3-level boost converter structure, the proposed converter can obtain higher voltage gain than conventional high step-up converters. The voltage spike of the switching device is well clamped by using the clamp circuit composed of a clamp diode and a capacitor and the energy of the leakage inductor of coupled inductor is effectively transferred to output. Due to the 3-level structure, the equivalent switching frequency of the coupled inductor is doubled, which results in reduced inductor size. A 500 W prototype converter is built and tested to verify performance of the proposed converter.