• Journal of Korea Multimedia Society
• /
• v.9 no.5
• /
• pp.585-594
• /
• 2006

Due to the size limit, the voice coil motor (VCM) is adopted in most of the mobile phone camera to control auto-focus instead of step motor. The optical system using the VCM has the property that the focus values are varying even though the same current is induced. It means that an error of the lens position was taken placed due to the characteristics of the VCM. In this paper, a algorithm was proposed to compensate the lens position error using the step size and the search count of each stage. In the proposed algorithm -7 step middle searching stage is inserted the conventional searching algorithm for the fast auto-focus searching and the final searing step size was set to +1 for the precise focus control, respectively. In the experimental results, the focus values was found more fast in the proposed algorithm than the conventional. And more the image quality by the proposed algorithm was superior to that of the conventional.

• Korean Journal of Optics and Photonics
• /
• v.33 no.6
• /
• pp.317-323
• /
• 2022

In this investigation, we describe a chromatic confocal sensor based on a geometric phase lens for measuring the thicknesses of transparent plates. In order to design a compact sensor, a geometric phase lens, which has diffractive and polarizing characteristics, is used as a device to generate chromatic aberration, and a fiber optic module is adopted. The systematic error of the sensor is reduced with wavelength peak detection by Gaussian curve fitting and the common error compensation obtained by the repeatedly consecutive experimental results. An approach to calculate the plate thickness is derived and verified with sapphire and BK7 plates. Because of the simple and compact design of the proposed sensor with rapid measurement capability, it is expected to be widely used in thickness measurements of transparent plates as an alternative to traditional approaches.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.3B
• /
• pp.280-287
• /
• 2001

본 논문에서는 기존의 LCD MW를 이용한 각 다중화 시스템에서 인접한 수직방향 MW 사이의 crosstalk를 제거하기 위하여 MW의 뒷단에 수직방향으로 주기적으로 서로 다른 초점 길이를 갖는 이중초점 렌즈를 삽입하여 인접한 MW의 기준빔이 서로 다른 공간에 기록되게 함으로써 기준빔의 전자적 제어뿐만 아니라 고밀도의 정보저장 및 복원이 가능한 새로운 공간-각 다중화 기법을 제안하고 이에 대한 광학 실험을 통해 구현가능성을 제시하였다.

• Journal of the Korea Computer Industry Society
• /
• v.9 no.2
• /
• pp.69-76
• /
• 2008

This paper implement an Camcorder NTSC camera autofocus control system on the DSP Board. The information of camera lens control obtain the only brightness simple image processing from the NTSC camcoder camera image. The exact focus makes the exact boundaries. The camera lens control that the increase sum of the useful ingredient values. Useful value obtained experiment value. Also noise is except because a big value of the ingredients so that obtained focus more accurate value.

• Journal of Korean Ophthalmic Optics Society
• /
• v.11 no.2
• /
• pp.131-135
• /
• 2006

The purposes of this study is examining a wearing tendency of a progressive multifocal lens. We measured refractive error values using subjective and objective refraction method with subjects in 40-65 ages. Also, we investigated and analyzed distribution of addition power and wearing tendency of progressive multifocal lens. Detected addition powers were ranged of +0.75D - +3.00D. In case of average addition, they were detected with +1.18D in 40's, +1.55D - +1.97D in 50's and +2.38D in above 61's age. The distributions of visual ability at a distant were measured that the hyperopia and hyperopic astigmatism 43%, the myopia and myopic astigmatism characteristic astigmatism 7% appeared highly with 36%. The male who uses the interior aspect multi focal lens with the short-range work were appeared the male 20%, the woman 19%.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.240-240
• /
• 2004

본 논문에서는 광학 기기 전반에 사용되고 있는 비구면 렌즈(aspheric lens)의 모델링과 제작 및 검증에 관한 연구를 수행하였다. 비구면 렌즈는 볼록렌즈, 오목렌즈와 달리 비구면을 사용함으로써, 사물의 원근에 관계없이 하나의 초점에 상을 맺을 수 있다. 그러나 이에 대한 모델링 정보는 공개되지 야고 있다. 따라서 본 연구에서는 다음의 식을 오일러 법(Euler method)을 적용하여 비구면 렌즈의 기하학적 형상을 모델링하였다.(중략)

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.2
• /
• pp.23-28
• /
• 2013

Microlens array as basic element of the optical system have been fabricated with various focal length (mainly with long focal length) depending on the purpose of application. In this paper, the microlens arrays were fabricated for observing fluorescent images within sol-gel. Though the fluorescent signal is very low, the microlens array can help obtaining clear images through extracting the fluorescent light from sol-gel. We fabricated microlens arrays with short focal length, which can extract the light using photoresist thermal reflow method. In the experiment, the diameter of microlens decreased after thermal reflow because the solvent within the photoresist was vaporized. Therefore, to compensate the shape error by this reduction, microlens diameter in photomask was altered and spin-coat recipe of photoresist were modified.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.6
• /
• pp.1493-1498
• /
• 2015

The autofocus system is automatically to drive the focus. It is very important to computer vision system. In the case of a compact camera, the actuator technology is used for auto-focus in mass production. the position sensor is required, the circuit configuration and easy method is widely used in VCM, compared to the stability of the drive size and the noise is a big stepping motor type, size has a piezo system having a humidity problem and the small leaded vulnerability. In addition, there is a liquid lens system, the advantages of low power in a compact structure but also a structure with proven quality and reliability and features required pressure. In this paper, we implement two control systems that can control the actuator as a liquid range of VCM using a sharpness of the image acquired by the image sensor automatically initiates 5Mpixel class was the implementation verification of focusing.

• Journal of Internet Computing and Services
• /
• v.6 no.6
• /
• pp.149-161
• /
• 2005

Catadioptric mirrors are widely used in automatic surveillance system. The major drawback of catadioptric mirror is its unequal image resolution. Equidistance catadioptric mirror can be the solution to this problem. Even double panoramic structure can generate stereo images with single camera system. So two images obtained from double panoramic equidistance catadioptric mirror can be used in finding the depth and height values of object's points. But compared to the single catadioptric mirror. the image size of double panoramic system is relatively small. This leads to the severe accuracy problem in estimation. The exact axial alignment and the exact mount of mirror are the sources that can be avoided but the focal length variation is inevitable. In this paper, the effects of focal length variation on the computation of depth and height of object' point are explained and the effective focal length finding algorithm, using the assumption that the object's viewing angles are almost same in stereo images, is presented.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1999.12a
• /
• pp.493-505
• /
• 1999

Zoom lens camera calibration is an important and difficult problem for two reason at least. First, the intrinsic parameters of such a camera change over time, it is difficult to calibration them on-line. Secondly, the pin-hole model for single lens system can not be applied directly to a zoom lens system. In this paper, We address some aspects of this problem.