• Journal of the Korean Society for Nondestructive Testing
• /
• v.13 no.1
• /
• pp.29-39
• /
• 1993

초음파탐상검사는 그 검사결과가 여타 비파괴검사법에 비해 검사자, 검사장비, 절차서 등 검사 시스템에의 의존도가 높으며, 이중에서도 특히 검사자의 능력과 숙련도에 크게 좌우된다. 따라서 검사결과의 신뢰도를 높이기 위해서는 무엇보다도 검사자에 대해 엄격한 자격인정(Qualification)이 필요하다. 초음파탐상검사는 원자력 발전소 기기의 가동전중검사시 가장 많이 적용하는 체적검사법으로써, 결함검출 및 평가의 신뢰도를 확보하기 위하여 최근 관련 기술기준에서는 검사자에 대해 보다 엄격한 자격인정을 요구함과 아울러 초음파탐상검사 시스템(검사자, 장비, 절차서)에 대한 기량검증(Performance Demonstration)까지를 요구하고 있다. 위의 두 가지 요건을 성공적으로 충족시킬 수 있다면, 초음파탐상기술의 신뢰도는 크게 향상될 것이다. 본고에서는 최근 보다 강화된 원전 가동전중검사 초음파탐상검사 요원의 자격인정요건에 대해 자세히 알아봄으로써 관련 국내 기술기준의 제정과 앞으로 국내 원전 초음파탐상 검사요원에 대한 본 자격인정요건의 적용에 대비코자 하였다. 한편, "초음파탐상검사 시스템에 대한 기량검증 요건"은 초음파탐상 검사요원의 자격인정 요건과 밀접한 관계가 있으므로 다음에 별도로 기술코자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3308-3314
• /
• 2015

The purpose of this study is to investigate the casual relationships among purchase decision factors of medical devices, satisfaction and repurchasing intention. Data of this study is a 2012 survey on medical institutions using medical devices of MW(ministry of health and welfare) and We analyzed 116 medical institutions having ultrasound imaging system lager than general hospitals among data. For empirical analysis, we carried out confirmative factor analysis and path-analysis using AMOS 21.0 package. Main results of this study are as follows: First, brand has positive influence on satisfaction and satisfaction has positive impaction on repurchase intention. Second, although not statistically significant, performance and service have positive impaction on satisfaction and price has negative influence on satisfaction. The significance of this study is to provide empirical basis on establishment of efficient marketing strategy and enhancement of competitiveness for the medical device industry.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.4
• /
• pp.62-68
• /
• 2000

It was designed a high-speed analog input card that is a important device of ultrasonic testing flaw detector in the middle of non-destructive testing in this Paper. The A/D Board is inquired high-speed sampling rate and fast data acquisition system. This pater shows a design that has a function of Peak- Detection for ultrasonic testing by ISA Bus type and a 50MHz of A/D converter in order to do sampling more than quadruple frequency of transducer frequency.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.7 no.4
• /
• pp.26-30
• /
• 2011

In order to ship low & Intermediate level radioactive waste drums, which have been temporarily stored on site, to a disposal facility, their physical and chemical properties should be evaluated and proven to meet the acceptance guideline prior to their shipment. Ultrasonic velocity method, which has been used to estimate the strength of concrete, can be suggested to evaluate the compressive strength of solidified radioactive waste, which is one of the evaluated properties. The strength is estimated from acoustic velocity. However, a guided wave traveling along a drum is generated when applying ultrasonic method to the drum, and this makes it difficult to analyze the signal due to overlap between transmitted wave through the contents in drum and the guided wave. This paper reported feasibility of ultrasonic method to evaluate of the compressive strength of the solidified LLW. It is observed that the guide wave is greater than transmitted wave, and ultrasonic velocity could be estimated from transmitted wave signal arriving prior to the guided wave

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.6 no.1
• /
• pp.9-15
• /
• 2010

This paper describes the Visual Tool for automatic ultrasonic examination that is under developing as a part of the project for development of automatic ultrasonic wave acquisition and analysis program. This tool that is supported by various image processing techniques will be adopted to detect the flaws in the component and piping welds in NPP. Visual Tool will enhance the integrity of nuclear power plant. The object of this paper is to address the Visual Tool which is developing for automatic ultrasonic inspection of welds in NPP.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.6 no.1
• /
• pp.23-28
• /
• 2010

To enhance the reliability of ultrasonic testing system, MOST(Ministry of Science and Technology) bulletin 2004-13 was published in 2004.6 requiring performance demonstration in ultrasonic examination and MEST(Ministry of Education, Science and Technology) 2009-37 was published in 2009.9(formerly MOST bulletin 2004-13). In order to meet the MEST bulletin requirement and increase the reliability of ultrasonic testing, all the ultrasonic examination procedure and equipment should be performance demonstrated and qualified. In this paper, generic procedure for the ultrasonic examination of dissimilar metal welds are described and new technique are introduced.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.7 no.2
• /
• pp.21-25
• /
• 2011

Although many defects in PZR heater sleeve have been reported continually from operating experiences in oversea nuclear power plant, utilities get into difficulties in finding appropriate methods for diagnostics of the components due to the limited access or high radiation problems. Recently, as an alternative, diagnostics using Guided Wave Testing(GWT) are proposed and the attention of the methods has been growing gradually because of their long range inspection capability. This study is to investigate the effectiveness of GWT to detect PWSCC in welding points of PZR heater sleeve. Moreover, mode sensitivity analysis of GWT and optimal frequency for the diagnostics of PWSCC are presented by testing the mock-ups specimens that contain artificial flaws.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.5 no.1
• /
• pp.20-24
• /
• 2009

There is extensive tubing pipe in the nuclear power plant under high temperature and pressure. Erosion and corrosion defects are expected on this tubing pipe due to environmental and mechanical factors. In this study, Guided Ultrasonic Wave technique was applied to detect defects. The technique explores the advantages of the Guided Ultrasonic Wave method that inspects along the wall of the pipe and can travel long distances, providing rapid collection of data. This paper presents a case study of the Guided Ultrasonic Wave testing of 3/8" tubing pipe. This study offers to understand detected signals through correlation between amplitude and depth of defects.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.5 no.1
• /
• pp.14-19
• /
• 2009

NDE(Nondestructive examination) detects a flaw or discontinuity in materials. Flaws detected by the examination shall be evaluated for the decision basis of the integrity. The internal flaws of forging products can be detected by UT. However, UT has detection limits because of its reflected signal weakness. Normally, a 1mm or less flaw is known as the limit. If a flaw was detected, the size of flaw would be evaluated by AVG(or DGS) technique. To verify the evaluation data, alternative examination methods are needed. But there is no alternative examination methods until now. In this study, Phased array ultrasonic technique can be used to size the flaws in the generator rotor with focused beam of ultrasonic wave as a supplement method of AVG. Also, the phased array ultrasonic technique described enables the shape of flaw to be depicted exactly.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.1006-1009
• /
• 2009

매년 운전자의 운전미숙과 돌발 상황으로 인한 자동차사고로 인해 수만 명의 사망자와 부상자가 나오고 있으며 이로 인한 경제적 손실도 막대하다. 현재 충돌사고를 방지하기 위해 레이더나 초음파센서와 같은 통신기기를 활용한 충돌회피시스템이 개발되고 있는 상황으로 충돌회피를 위해서는 센서부도 중요한 역할을 하지만 충돌회피 알고리즘 개발이 무엇보다 중요하다. 본 논문에서는 두 개의 초음파 센서를 이용하여 전방에 있는 장애물을 회피할 수 있는 시스템을 구축하였다. 자동차가 자율적인 판단에 따라 충돌 없이 이동할 수 있는 능력을 갖게 하기 위하여 초음파센서와 광센서를 이용하였으며, 라인트레이서와 같이 라인을 따라 자동차가 이동하는 도중 장애물을 감지하였을 경우 장애물을 회피할 수 있는 알고리즘을 이용하여 개발하였다. 그리고 주행 시험을 통해 장애물 회피에 관한 테스트를 수행하였다.