• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.2
• /
• pp.78-86
• /
• 2017

As the amount of slag generated annually increases, attempts to recycle slag as high value products are underway in order to develop an efficient resource recycling industry based on slag and derive economic benefits as well. However, the application of electric arc furnace (EOS) slag as construction material is practically limited because of the unstable substances included in it, such as free CaO.(EOS contains a small amount of free CaO, but several limitations still exist. Slag is stored for more than 3 months depending on the quantity of slag, which leads to additional economic loss. In this study, the amount of free CaO present in EOS is quantitatively evaluated to examine its qualities as a potential construction material and verify its application as concrete material. The quantitative analysis of free CaO present in EOS is performed using ethylene glycol. The free CaO contents of EOS samples were found to be below 0.5%. This satisfies the criteria specified in KS F 4571, which states that the CaO content should be below 40% and $CaO/SiO_2$ ratio should be below 2.0. In addition, it was confirmed that free CaO content difference appears to be dependent on the aging period and storage position.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1742-1746
• /
• 2008

지금까지의 대부분의 2차원 수리해석 모형은 상류와 사류가 혼재된 불연속적인 천이류 흐름을 해석하기에 계산의 정확도 및 현실성에서 많은 문제를 보이고 있으며, 특히 계산과정에서 나타날 수 있는 마른하도의 처리에 있어서 많은 어려움을 겪고 있다. 본 연구의 목적은 유한체적기법을 사용하여 상류와 사류가 혼재하는 불연속적인 하천 천이류를 안정적으로 해석하기 위해 개발된 고정확도 수치모형의 자연하도 적용에 있으며, 또한 마른 하도로 전파되는 흐름 모의 및 계산과정에서 나타날 수 있는 마른하도 처리의 어려움을 해결함으로써 모형의 정확도와 안정성을 검증하여 실제 하천에서의 모형 적용성을 검토함에 있다. 이를 위해 본 연구에서는 흐름의 전파양상을 정확하게 반영할 수 있는 상류이송기법인 Godunov 기법과 관심격자의 좌우 격자 정보를 모두 사용하는 대표적 중앙차분기법인 Beam-Warming 기법의 장점을 모두 반영한 가중평균흐름률 (Weighted Average Flux) 기법을 사용하여 사각격자망의 구성을 통해 자연하도에 적용시킬 수 있는 2차원 유한체적모형을 개발하고자 하였고, 개발된 모형의 안정성, 정확도, 적용성을 검증하기 위해 직사각형 수로, 큰 사행비를 가진 만곡수로에 적용하고, 그 결과를 수리모형 실험결과와 비교, 분석하였다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.2
• /
• pp.86-94
• /
• 2020

Purpose: The purpose of this study is to compare the volume stability depending on the mixing methods and storage time for the conventional alginate and extended-pour alginate. Materials and methods: An arch-shaped metal model was fabricated, and one conventional alginate and two extended-pour alginates were used to take impressions using different mixing methods (hand and automatic). 120 impressions were taken (40 per each alginate) and stone models were made in accordance with the different storage times (immediate, 2 days, 5 days, and 6 days). The models were scanned with a 3D table scanner and dimensional change was measured by superimposing the scan data. Using SAS 9.4 (SAS Institute Inc., Cary, NC, USA), the general linear model and Tukey's post hoc test was conducted for statistical analysis (P<.001). Results: There was no statistically significant difference in the dimensional accuracy between two mixing methods, and the volume change was minimum when the stone was poured immediately in all groups. Dimensional accuracy showed a statistically significant difference between groups after 2 days of storage, and extended-pour alginate showed higher accuracy after 5 days of storage comparing to conventional one. Large amounts of volume change were showed at 2 - 5 days for conventional alginate and at 5 - 6 days for extended pour alginate. Conclusion: The mixing method of alginate does not affect volume stability. Although extended-pour alginate has better volume stability than conventional alginate for a long time, it is recommended to pour stone as soon as possible.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.457-463
• /
• 2009

식생만으로 제방을 보호하는 식생호안이 충분한 수리적 안정성을 확보할 수 있으면 생태적 건전성을 확보할 수 있음은 물론 호안을 건설하는 비용을 절감할 수 있을 것이다. 본 연구는 이러한 필요성에 따라 식생의 뿌리가 호안의 수리적 안정에 미치는 영향을 분석하였다. 이를 위해 하천의 수변부에 서식하는 초본식생에 대하여 식생이 외력에 저항하는 저항특성을 파악하고자 인발시험을 실시하였다. 식생의 뿌리는 외력으로 작용하는 하천수의 흐름에 대해 저항하고, 하천사면의 토양을 조정시켜 사면을 안정화시키는 역할을 하고 있다. 현장인발시험은 광주광역시 황룡강 및 광주천 일대의 4개 지역에서 총 6종 27개 개체에 대해 수행하였으며, 휴대용 Pushpull-Gauge를 이용하여 식생의 뿌리가 뽑힐 때까지의 최대인발력을 측정하였다. 측정된 최대인발력에서 토양의 무게를 제거한 뿌리만의 순수인발력을 산출하였으며, 이를 이용하여 인발강도를 계산하였다. 인발강도에 영향을 미치는 요소로서 식생뿌리체적을 선정하여 체적과 인발강도의 관계를 분석하였다. 분석결과 뿌리의 체적이 증가할수록 인발강도가 비례적으로 증가하는 것으로 나타났다.

• 대한치과보철학회:학술대회논문집
• /
• 1999.11a
• /
• pp.46-46
• /
• 1999

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3794-3801
• /
• 2010

This study evaluated the linear dimensional changes with the factor of time and thickness using of three commercially available tissue conditioners (Coe-Comport, Visco-Gel, Soft-Liner). The thickness of materials were changed (1.5mm, 3.0mm) and the percentage changes in dimension were measured at 1h(baseline), 12h, 24h, 3 days and 7days after specimen preparation. The obtained data were analyzed by ANOVA with the SAS/PC statistical package. From the results, large differences appear between the various tissue conditioners. The results suggested that the period recommended for forming functional impression would be 36h to 3days after insertion in the mouth. Depending on the type of tissue conditioner over time, as there were significant differences in the elastic change(p<0.05). Tissue conditioner of the 1.5mm, 3.0mm thickness were significantly different by the dimensional stability(p<0.05). Elastic deformation of the ideal itself, and resilient when compared only the look, Visco-Gel 3.0mm group, stability was the most stable volume. In addition, it is important to select tissue conditioners suitable for functional impression because of the wide range of dimensional stability among the materials.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.1
• /
• pp.23-27
• /
• 2014

Purpose: The purpose of this study was to determine the dimensional stability of three rubber impression materials (polysulfide, polyvinylsiloxane, polyether) in an iodophor disinfectant. Materials and Methods: Seventy-two impressions were made with each material and divided into control, 10-minute, and 30-minute immersion groups using an iodophor as the disinfectant. A microscope was used to measure dimensional changes in the stone casts made from each group of impressions, and the percent change was analyzed using a two-way ANOVA (P = 0.05). Results: All dimensional changes after iodophor disinfection were small in 10 minute groups, however, showed significantly increased in 30 minute groups (P < 0.05). Conclusion: Clinically, it can be recommended to use iodophor disinfectant for rubber materials within 10 minute.

• Journal of dental hygiene science
• /
• v.14 no.1
• /
• pp.15-21
• /
• 2014

The purpose of this study in vitro investigation was to evaluate the dimensional stability of dental digital models made by impression scanning method. Twenty working models were produced. Twenty impressions were made from study models. The dimensional stability of models of two groups (stone and digital models) was examined using six landmark distances. Stone models were measured through digital vernier calipers. Digital models were measured by the computer program. Statistical analyses were performed with Wilcoxon rank sum test (${\alpha}=0.05$). The mean of six landmark distances were significantly larger in the stone models than in the digital models (p<0.05) but digital models showed clinically acceptable accuracy.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.428-432
• /
• 2007

댐 제방 등의 붕괴로 인하여 발생하는 급격한 유량의 변화와 흐름영역의 변화로 인한 천이류 및 도수의 발생, 불규칙한 하천단면에서 갈수기 저수기의 흐름해석은 기존의 수치해법의 한계로 인하여 수리모형실험 및 경험식 또는 단면의 단순화 등에 의존하고 있는 실정이다. 본 연구에서는 자연하천에서 비선형 흐름율 계산에 불연속초기조건의 해석해인 Riemann 근사해법을 사용하여 수치적으로 안정되고 정확한 1차원 모형을 개발하고자 한다. 이를 위하여 유한체적법을 사용하였고, 수위와 유량의 계산을 위하여 요구되는 유한체적을 유출입하는 흐름율의 계산에 HLL Riemann 해법을 사용하였으며, MUSCL 기법으로 2차 정확도기법으로 확장하였다. Riemann 해법을 통하여 계산된 비선형의 흐름율과 보존 특성을 만족시켜줄 수 있는 하상 및 하폭변화로 인한 생성항을 처리하는 기법을 제안함으로서 새로운 1차원 수치해석모형을 개발하였다. 개발된 모형의 실제하천의 적용성을 확인하기 위하여 하상과 하폭이 변화하는 부정류 흐름에 적용하여 모형의 적용성 및 정확성을 검증하였다.

• Magazine of RCR
• /
• v.4 no.1
• /
• pp.6-16
• /
• 2009