• Journal of Fashion Business
• /
• v.13 no.2
• /
• pp.17-29
• /
• 2009

Due to rapid economic growth and accelerated urbanization, numerous cities in China have been turning into huge consumption markets almost simultaneously, and thus, the Chinese apparel markets being globalized are most vigorous in the world, attracting attention from the world apparel industries. If the Korean apparel businesses should develop the products befitting the conditions of the Chinese apparel markets and reflecting her consumers' fashion trends and needs, their apparels would be satisfactory enough to Chinese consumers, being competitive in the Chinese markets. In this sense, today's Chinese apparel markets may well provide the Korean apparel businesses with both crisis and opportunity. As one of the methods to enhance Chinese consumers' satisfaction with the Korean apparels, the Korean apparel businesses should consider seriously about the apparel fitting or a factor determining apparel silhouettes and sense of wearing. Since Chinese consumers differ widely in terms of body types and measurements depending on regions due to the vast territory, differentiation of the apparel fitting is more important than any other single factor, and thus, correct information about apparel fitting may well be directly related with manufacturing of excellent apparels. The purpose of this study is to comparatively analyze the upper body measurements and types of the Chinese and Korean women in their 20's to provide the Korean apparel business engaged in Chinese markets with some basic data about apparel fitting conducive to their development of effective apparel commodities. For this purpose, Chinese women in their 20's living in China's two major cities leading China's women's apparel markets were sampled.

• The Research Journal of the Costume Culture
• /
• v.19 no.1
• /
• pp.176-190
• /
• 2011

Today's young generation in digital era has a rich education environment and convenient life, on the other hand, there was negative impact on growth as normal body type because of adverse impact on an excessive study and insufficient exercise, etc. Also, for these people in IT culture generation, using small mobile including computer for long time is becoming main issue as changing factor in posture and body type in terms of spine like their neck disc. This body-typed characteristic reaches to normal adult body type in the process of physical development of adult woman and has least modification in body type. Therefore, despite of early young generation, body suitability of upper body clothes might caused imbalance. So, for intended to early 20s women, to design clothes with consideration on imbalance of body type by bended and curved spine, body type studies about size of upper body and forms are needed. As this researcher measured the body type of early 20s college women in metropolitan area, changes in body type of young generation with use of digital equipment recently were recognized since straight body type was decreased unequally and had characteristic in terms of changes to be bended body type. The changes of these body type should be considered to make clothes. Also, since there are some restrictions on this research objects in terms of local and numbers of measured objects, a broad interpretation of result on this research should be really careful.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.2
• /
• pp.95-108
• /
• 2019

This study aims to determine the characteristics of new senior women's torso shapes. The data was collected from the 7th Size Korea, which analyzed 412 women between the ages of 55-69. A factor analysis was performed based on 20 indices, including eight based on circumference, eight based on height and length measurements, and four based on torso flattening. The results of the factor analysis suggest five main factors: torso silhouette, longitudinal size of the body, torso flattening rate, abdominal shape, and posterior longitudinal size. The results of the cluster analysis suggest three overall types: Type 1 is the inverted triangular obese shape which is characterized by large breasts, small buttocks, a short height, and a forward-bending posture; Type 2 is the rectangular, slim shape which is characterized by a forward neck and a flat front and back of the torso, and is the most slender among the three types; Type 3 is the large rectangular, overall obese shape, which is characterized by a round shape with large breasts, waist, and buttocks, and a forward-bending posture with a protruding back, and this is the most obese type. According to the results of the cross-tabulation, women aged 55-59 showed no trend in body shape; women aged 60-64 showed an increases in the inverted triangular obese shape and the large rectangular, overall obese shape; women aged 65-69 showed an increase in the large rectangular, overall obese shape and a decrease in the rectangular slim shape. In summary, new senior women showed body shape characteristics of being short, more obese having, a bent over posture. As they grew older, the curves disappeared, and the body becomes rounder. The study found that variation in body shape exists among new senior women in the aged society.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.24 no.2
• /
• pp.73-84
• /
• 2022

Based on the method of marking the size of children's wear suggested by Korean Agency for Technology and Standards, this study classified the heights of school-aged girls by 10cm. The purpose of this study is to provide foundational material by analyzing and comparing the characteristics of torso types. The author analyzed the height section of 130 to 139.9cm, which the majority of subjects fell into, and concerning the method of research, this study statistically analyzed body sizes and calculated items related to 162 persons' torso types out of the 6th Korean Body Size Data. According to the results, eight factors were extracted, and the total explanatory variate of all the factors was found to be 81.93%. According to the results of cluster analysis with it as an independent variable, three types were drawn. Type 1 (41.4%) was found to be the thickest in the torso and round and severely curved in the sectional form of the circumference item. RegardingType 2 (25.9%), the horizontal size of the torso is similar to that of Type 1: the upper body is long, and the sectional form of the circumference item is oval-shaped. Regarding Type 3 (32.7%), mean values are similar to those of Type 2 overall: the upper body is short, and the body is the most upright. In conclusion, according to the results of analyzing torso types, the types and average values indicate significant differences in the height section of 130~139.9cm. This implies that when making ready-made clothes, it is necessary to come up with the sizes of more detailed items in relation with height. It is expected that the findings of this study will be utilized as basic data when children's wear companies develop prototypes and use grading variances according to the variations of size.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.424-434
• /
• 2009

Statement of problem: Problems such as loosening and fractures of retained screws and fracture of implant fixture have been frequently reported in implant prosthesis. Purpose: Implant has weak mechanical properties against lateral loading compared to vertical occlusal loading, and therefore, stress analysis of implant fixture depending on its material and geometric features is needed. Material and methods: Total 28 of external hexed implants were divided into 7 of 4 groups; Group A (3i, FULL $OSSEOTITE^{(R)}$Implant), Group B (Nobelbiocare, $Br{\aa}nemark$ $System^{(R)}$Mk III Groovy RP), Group C (Neobiotec, $SinusQuick^{TM}$ EB), Group D (Osstem, US-II). The type III gold alloy prostheses were fabricated using adequate UCLA gold abutments. Fixture, abutment screw, and abutment were connected and cross-sectioned vertically. Hardness test was conducted using MXT-$\alpha$. For fatigue fracture test, with MTS 810, the specimens were loaded to the extent of 60-600 N until fracture occurred. The fracture pattern of abutment screw and fixture was observed under scanning electron microscope. A comparative study of stress distribution and fracture area of abutment screw and fixture was carried out through finite element analysis Results: 1. In Vicker's hardness test of abutment screw, the highest value was measured in group A and lowest value was measured in group D. 2. In all implant groups, implant fixture fractures occurred mainly at the 3-4th fixture thread valley where tensile stress was concentrated. When the fatigue life was compared, significant difference was found between the group A, B, C and D (P<.05). 3. The fracture patterns of group B and group D showed complex failure type, a fracture behavior including transverse and longitudinal failure patterns in both fixture and abutment screw. In Group A and C, however, the transverse failure of fixture was only observed. 4. The finite element analysis infers that a fatigue crack started at the fixture surface. Conclusion: The maximum tensile stress was found in the implant fixture at the level of cortical bone. The fatigue fracture occurred when the dead space of implant fixture coincides with jig surface where the maximum tensile stress was generated. To increase implant durability, prevention of surrounding bone resorption is important. However, if the bone resorption progresses to the level of dead space, the frequency of implant fracture would increase. Thus, proper management is needed.

• Journal of Korea Fair Competition Federation
• /
• no.29
• /
• pp.58-64
• /
• 1998

한국공정경쟁협회는 지난 ''97년 7월 16일 공정거래위원회로부터 $\lceil$개방체제하에서의 경쟁정책방향에 대한 연구$\rfloor$용역을 의뢰받아 본 협회의 김웅재 연구위원과 중앙대학교 법대학장 서헌제 교수, LG경제연구소 부연구위원 우영수 박사와 공동으로 용역연구팀을 구성하고 5개월간의 연구 끝에 지난 ''97년 12월 15일 최종보고서를 공정거래위원회에 제출하였다. 동 연구결과에 대해 지난 ''97년 12월 26일 공정거래위원회 간부직원들과의 모임에서 보고를 하였으며 이에 대한 토론의 시간도 가졌다. 특히, 이번 연구용역 과정에서는 업계의 공정거래법 전문가들과 공정거래제도에 관한 연구회를 구성$\cdot$운영함으로써 보다 효율적인 연구결과를 가져올 수 있도록 하였다. 특히 본 연구에서는 외국과의 역차별 문제도 다루었는데, 마침 IMF 경제체제에서는 이러한 역차별 문제를 점검할 필요가 있어 본 연구는 시대적 상황에 부응할 수도 있게 되었다.

• Journal of the Korean Society of Costume
• /
• v.38
• /
• pp.279-288
• /
• 1998

The purpose of this paper was to find out obese women's respective characteristics of torso body shape. The subjects were 132 obese women for direct measurement and were 101 obese women for indirect measurement, age of 20~59. The criterial of obesity base on Rohrer index($\geq$1.6) and busts girth ($\leq$90). The results were as follows : 1) In comparison with the average body shapes in common body types, in 30's was bigger in the bust and waist girth than the different age groups. 2) According to the difference in the basic girth(bust and waist girth, hip and bust girth, hip and waist girth) the body types were classified 2 groups. Types 1 was large bust and slightly curved from waist to hip. Type 2 was large hip and larger in the curve from waist to hip than type 1.

• Journal of Trauma and Injury
• /
• v.22 no.1
• /
• pp.77-86
• /
• 2009

Purpose: The appropriate management of traumatic truncal arterial injury is often difficult to determine, particularly if the injury is associated with severe additional truncal lesions. The timing of repair is controversial when patients arrive alive at the hospital. Also, there is an argument about surgery versus stent-graft repair. This study's objective was to evaluate the appropriate method and the timing for treatment in cases of truncal abdominal injury associated with other abdominal lesions. Methods: The medical records at Ajou University Medical Center were reviewed for an 8-year period from January 1, 2001, to December 31, 2008. Twelve consecutive patients, who were diagnosed as having had a traumatic truncal arterial injury, were enrolled in our study. Patients who were dead before arriving at the hospital or were not associated with abdominal organ injury, were excluded. All patients involved were managed by using the ATLS (Advanced Trauma Life Support) guideline. Data on injury site, the timing and treatment method of repair, the overall complications, and the survival rate were collected and analyzed. Results: Every case showed a severe injury of more than 15 point on the ISS (injury severity score) scale. The male-to-female ratio was 9:3, and patients were 41 years old on the average. Sites of associated organ injury were the lung, spleen, bowel, liver, pelvic bone, kidney, heart, vertebra, pancreas, and diaphragm ordered from high frequency to lower frequency. There were 11 cases of surgery, and one case of conservative treatment. Two of the patients died after surgery for truncal organ injury: one from excessive bleeding after surgery and the other from multiple organ failure. Arterial injuries were diagnosed by using computed tomography in every case and 9 patients were treated by using an angiographic stent-graft repair. There were 3 patients whose vessels were normal on admission. Several weeks later, they were diagnosed as having a truncal arterial injury. Conclusion: In stable rupture of the truncal artery, initial conservative management is safe and allows management of the major associated lesions. Stent grafting of the truncal artery is a valuable therapeutic alternative to surgical repair, especially in patients considered to be a high risk for a conventional thoracotomy.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.2
• /
• pp.121-143
• /
• 2010

To investigate the effect of implant types and bone resorption on the fracture characteristics. 4 types of Osstem$^{(R)}$Implant were chosen and classified into external parallel, internal parallel, external taper, internal taper groups. Finite elements analysis was conducted with ANSYS Multi Physics software. Fatigue fracture test was performed by connecting the mold to the dynamic load fatigue testing machine with maximum load of 600N and minimum load of 60N. The entire fatigue test was performed with frequency of 14Hz and fractured specimens were observed with Hitachi S-3000 H scanning electron microscope. The results were as follows: 1. In the fatigue test of 2 mm exposed implants group, Tapered type and external connected type had higher fatigue life. 2. In the fatigue test of 4 mm exposed implants group, Parallel type and external connected types had higher fatigue life. 3. The fracture patterns of all 4 mm exposed implant system appeared transversely near the dead space of the fixture. With a exposing level of 2 mm, all internally connected implant systems were fractured transversely at the platform of fixture facing the abutment. but externally connected ones were fractured at the fillet of abutment body and hexa of fixture or near the dead space of the fixture. 4. Many fatigue striations were observed near the crack initiation and propagation sites. The cleavage with facet or dimple fractures appeared at the final fracture sites. 5. Effective stress of buccal site with compressive stress is higher than that of lingual site with tensile stress, and effective stress acting on the fixture is higher than that of the abutment screw. Also, maximum effective stress acting on the parallel type fixtures is higher. It is careful to use the internal type implant system in posterior area.

• Journal of Haehwa Medicine
• /
• v.16 no.1
• /
• pp.115-126
• /
• 2007

Objectives : The purpose of this study is to find out relationship between Trigger points and Acupoints. Methods : We have researched some of oriental and western medical books about Trigger points and Acupoints from head to trunk. Conclusions : 1. In the head, there are 46 trigger points Among them, 19 trigger points correspond to Acupoints and 25 trigger points are similar to them 2. In the thorax, there are 33 trigger points Among them, 17 trigger points correspond to Acupoints and 20 trigger points are similar to them 3. In the upperimb, there are 20 trigger points Among them, 9 trigger points correspond to Acupoints and 13 trigger points are similar to them. 4 In the trunk, there are 11 trigger points. Among them, 5 trigger points correspond to Acupoints and 11 trigger points are similar to them.