• Clean Technology
• /
• v.21 no.3
• /
• pp.164-170
• /
• 2015

In this study, polysulfone-Escherichia coli biomass composite fiber (PSBF) was prepared by spinning the suspension of PS and E. coli biomass and amine-methylated PSBF (AM-PSBF) was fabricated through the methylation of amine groups in PSBF. As comparing the adsorption characteristics of basic dye, Basic Blue 3 (BB3) by the PSBF and AM-PSBF, the effect of the methylation of amine groups on BB3 adsorption was confirmed. pH edge experiments showed that the BB3 uptake of PSBF and AM-PSBF increased as pH was increased and the BB3 uptake of AM-PSBF was higher than that of PSBF at the same pH. Both of PSBF and AM-PSBF was reached at equilibrium within 5 h and kinetic experimental data were well fitted by the pseudo-first-order kinetic model. By the Langmuir model, the maximum adsorption capacities of PSBF and AM-PSBF at pH 8 were evaluated to be 28.9 and 20.7 mg/g, respectively. The maximum adsorption capacity of AM-PSBF was enhanced 1.4 times comparing that of PSBF. These results indicate that the methylation of amine groups in PSBF leads to the improvement of BB3 adsorption capacity. In addition, the results of desorption experiments revealed that AM-PSBF was repeatedly reusable.

• Clean Technology
• /
• v.18 no.3
• /
• pp.280-286
• /
• 2012

The dry etching of sacrificial $SiO_2$ was performed in supercritical carbon dioxide. The etching of boron phosphor silica glass (BPSG), tetraethyl orthosilicate (TEOS), thermal $SiO_2$, and Si-nitride (SiN) was investigated by using a two chamber system with HF/py etchant and alcohol additives. The etch rate of sacrificial $SiO_2$ increased upon the addition of methanol. The etch selectivity of BPSG with respect to SiN was highest with IPA although the highest etch rate was resulted from methanol except BPSG. The etch rate increased with the temperature in HF/py/MeOH system. Especially the increase of the etch rate was much higher for BPSG with an increase in the reaction temperature. The etch residue was not reduced apparently upon the addition of alcohol cosolvents to HF/py. While the etch rate in HF/$H_2O$ was higher than HF/py/alcohol system, the rate decreased with the addition of alcohols to HF/$H_2O$. The cantilever beam structure of high aspect ratios was released by the dry ething in supercritical carbon dioxide without damage.

• Clean Technology
• /
• v.17 no.3
• /
• pp.273-279
• /
• 2011

The physicochemical properties of manufactured nanomaterials can vary depending upon the methods of manufacture, although the utilized raw materials are same. Hence, the toxicity can also vary based on the methods of nanomaterials manufacture. In this study, we compared the toxicity effect of two types of CNTs (MWCNT, multi-walled carbon nanotube; SWCNT, single-walled carbon nanotube) that differ in length and wall number. In case of MWCNTs, inflammatory responses were more strongly induced in longer groups, whereas body weights more clearly decreased in shorter groups. SWCNT significantly decreased the relative weights of brain and kidney, and the inflow of immune cells and the hematological changes were observed significantly on day 1 and day 7 after exposure, respectively. Our results showed that the length and wall number of CNTs can serve as critical factors in the exhibited inflammation and toxicity.

• Clean Technology
• /
• v.20 no.4
• /
• pp.433-438
• /
• 2014

There is an increasing interest in the development of rechargeable batteries suitable for use in both hybrid electric vehicles and energy storage systems that require higher charge & discharge rates, bigger battery sizes and increased safety of the batteries. Spinel-type lithium titanium oxide ($Li_4Ti_5O_{12}$) as a potential anode for lithium ion batteries has many advantages. It is a zero-strain materials and it experiences no structural change during the charge/discharge precess. Thus, it has long cycle life due to its structural integrity. It also offers a stable operation voltage of approximately 1.55 V versus $Li^+/Li$, above the reduction potential of most organic electrolyte. In this study, Ru added $Li_4Ti_5O_{12}$ composites were synthesized by solid state process. The characteristics of active material were investigated with TGA-DTA, XRD, SEM and charge/discharge test. The capacity was reduced when Ru was added, however, the polarization decreased. The capacity rate of $Li_4Ti_5O_{12}$ with Ru (3%, 4%) addition was reduced during the charge/discharge precess with 10 C-rate as a high current density.

• Clean Technology
• /
• v.27 no.4
• /
• pp.306-314
• /
• 2021

Grape skins are a natural resource rich in antioxidants, but people only eat grape flesh and have discarded the skins. This study investigated the possibility of using grape skin extract as a raw material for functional cosmetics. The dried grape skin powder was put in distilled water and stirred for 1 h, and then the supernatant separated from the solid was used as an extract. The extract yield was 17.8 ~ 31.4%, and the total flavonoid and polyphenol contents in the extract were 1.8 ~ 2.5 mg-QE g-extract^-1 and 16.9 ~ 20.3 mg-GAE g-extract^-1, respectively. The extract effectively removed radicals of DPPH and ABTS, and the degree of scavenging increased with the concentration of the extract. The extract inhibited the collagen hydrolysis activity of collagenase, and the activity inhibition rate increased to 84.2% as the extract concentration increased. However, notable inhibition of tyrosinase by the extract was not found. As the extract of Chamaecyparis obtusa was added to the grape-skin extract, the tyrosinase inhibition rate increased, but the DPPH radical scavenging activity decreased. This study found that grape skin extract has a high antioxidant capacity and anti-wrinkle effect but a low whitening effect. However, by mixing the grape skin extract with the extract of C. obtusa in an optimal ratio, the whitening effect was improved with excellent antioxidant and anti-wrinkle effects.

• Clean Technology
• /
• v.25 no.1
• /
• pp.56-62
• /
• 2019

The equilibrium, kinetic and thermodynamic parameters of adsorption of murexide by granular activated carbon were investigated. The experiment was carried out by batch experiment with the variables of the amount of the adsorbent, the initial concentration of the dye, the contact time and the temperature. The isothermal adsorption equilibrium was best applied to the Freundlich equation in the range of 293 ~ 313 K. From the separation factor (${\beta}$) of Freundlich equation, it was found that adsorption of murexide by granular activated carbon could be the appropriate treatment method. The adsorption energy (E) obtained from the Dubinin- Radushkevich equation shows that the adsorption process is a physical adsorption process. From the kinetic analysis of the adsorption process, pseudo second order model is more consistent than pseudo first order model. It was found that the adsorption process proceeded to a spontaneous process and an endothermic process through Gibbs free energy change ($-0.1096{\sim}-10.5348kJ\;mol^{-1}$) and enthalpy change ($+151.29kJ\;mol^{-1}$). In addition, since the Gibbs free energy change decreased with increasing temperature, adsorption reaction of murexide by granular activated carbon increased spontaneously with increasing temperature. The entropy change ($147.62J\;mol^{-1}\;K^{-1}$) represented the increasing of randomness at the solid-solution interface during the adsorption reaction of murexide by activated carbon.

• Clean Technology
• /
• v.27 no.3
• /
• pp.261-268
• /
• 2021

Equilibrium, kinetics, and thermodynamics of adsorption of acid black 1 (AB1) by coal-based granular activated carbon (CGAC) were investigated with the adsorption variables of initial concentration of dye, contact time, temperature, and pH. The adsorption reaction of AB1 by activated carbon was caused by electrostatic attraction between the surface (H⁺) of activated carbon and the sulfite ions (SO₃^-) and nitrite ions (NO₂^-) possessed by AB1, and the degree of reaction was highest at pH 3 (97.7%). The isothermal data of AB1 were best fitted with Freundlich isotherm model. From the calculated separation factor (1/n) of Freundlich, it was confirmed that adsorption of AB1 by activated carbon could be very effective. The heat of adsorption in the Temkin model suggested a physical adsorption process (< 20 J mol^-1). The kinetic experiment favored the pseudo second order model, and the equilibrium adsorption amount estimated from the model agreed to that given by the experiments (error < 9.73% ). Intraparticle diffusion was a rate controlling step in this adsorption process. From the activation energy and enthalpy change, it was confirmed that the adsorption reaction is an endothermic reaction proceeding with physical adsorption. The entropy change was positive because of an active reaction at the solid-liquid interface during adsorption of AB1 on the activated carbon surface. The free energy change indicated that the spontaneity of the adsorption reaction increased as the temperature increased.

• Clean Technology
• /
• v.27 no.3
• /
• pp.240-246
• /
• 2021

The waste etching solution for chip on film (COF) contained about 3.5% copper, and it was recovered through cementation using iron samples. The effect of cementation with plate, chip, and powder iron samples was investigated. The molar ratio (m/r) of iron to copper was used as a variable in order to increase the recovery rate of copper. As the molar ratio increased, the copper content in the solution rapidly decreased at the beginning of the cementation reaction. Before and after the reaction, the copper content of the solution was determined by Inductively Coupled Plasma (ICP) using copper concentration according to time. After cementation at room temperature for 1 hour, the recovery rate of copper had increased the most in the iron powder sample, having the largest specific surface area of the samples, followed by the chip and plate samples. The recovered copper powder was characterized for its crystalline phase, morphology, and elemental composition by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Energy-dispersive X-ray spectroscopy (EDS), respectively. Copper and unreacted iron were present together in the iron powder samples. The optimum condition for recovering copper was obtained using iron chips with a molar ratio of iron to copper of 4 giving a recovery rate of about 98.4%.

• Clean Technology
• /
• v.15 no.3
• /
• pp.194-201
• /
• 2009

Reductive reactivity of zero-valent iron nanoparticles was investigated for removal of nitrate-nitrogen which is considered one of the major water pollutants. To elucidate the difference in reactivity between preparation methods, iron nanoparticles were synthesized respectively from microemulsion and aqueous solution of ferric ions. Iron nanoparticles prepared from microemulsion were deposited on aluminum by electrophoretic method, and their reaction kinetics was compared to that of the same nanoparticles suspended in aqueous batch reaction. With an approximation of pseudo-first-order reaction, rate constants for suspended nanoparticles prepared from microemulsion and dilute aqueous solution were $3.49{\times}10^{-2}min^{-1}$ and $1.40{\times}10^{-2}min^{-1}$, respectively. Iron nanoparticles supported on aluminum showed ca. 30% less reaction rate in comparison with the identical nanoparticles in suspended state. However, supported nanoparticles showed the superior effectiveness in terms of nitrate-nitrogen removal per zero-valent iron input especially when excess amounts of nitrates were present. Iron nanoparticles deposited on aluminum maintained reductive reactivity for more than 3 hours, and produced nitrogen gas as a final reduction product of nitrate-nitrogen.

• Korean Journal of Organic Agriculture
• /
• v.15 no.1
• /
• pp.93-108
• /
• 2007

In order to find a solution to protect pigs from bacterial diarrhea and the nasty smell in stalls which are the most trouble, we composed a bio-formula with Stretococcus thermophilus, Bacillus amyloliquifaciens and Bacillu subtilis. The antagonistic microbe Bacillus amyloliquifaciens can control the growth of Salmonella typhimurium KCTC 1926, Escherichia coli O-157, Listeria and Staphylococcus. S. thermophilus from pig's stomach can live in gastric juice so it also control germs. They worked in its living cell state and its culture fluid. As a result of feeding with piglings, it showed effects of preventing diarrhea and increasing the weight.