• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.9
• /
• pp.1482-1491
• /
• 2013

The purpose of this study was to investigate the safety accidents and physical fatigues of school foodservice employees. Out of 300 questionnaires distributed from December 1~20, 2011, 276 responded. After excluding 54 incomplete questionnaires, 222 (usage rate: 74%) were examined in the final analysis. First, our results showed that in terms of safety accidents, most received bruises (92.8%), followed by burns (73.0%), cuts and lacerated wounds (69.4%), sprains (47.7%), falls (42.8%), fractures/dislocations (31.5%) and electric shock (2.7%). Second, we found that the average degree of physical fatigue of school foodservice employees was 3.65 based on the 5-point Likert scale. Specifically, pain in the arms and wrist was rated the highest, at 4.18. Third, results showed that the factors affecting physical fatigue were 'class of school' (P<0.05), 'frequency of meal serving per day' (P<0.05), 'no. of meals served per day' (P<0.001), 'no. of meals per employee' (P<0.05) and 'warm-up exercise before starting work' (P<0.05). This means that foodservice employees serving middle schools, serving meals three times per day, serving more than 1,000 meals per day, and serving more than 111 meals per employee perceive higher levels of physical fatigue. In addition, the physical fatigue of those who perform warm-up exercises before starting work was significantly lower than those who do not perform warm-up exercises before work (P<0.05). In conclusion, the frequently occurring major safety accidents of school foodservice employees were bruises and burns. An increase in workload also leads to the increasing physical fatigue of school foodservice employees. Thus, to lower the physical fatigue of school foodservice employees, school foodservice employees should be encouraged to perform warm-up exercises before staring work and new staffing guidelines for school foodservice employees should be developed.

• Journal of the Korea Convergence Society
• /
• v.13 no.3
• /
• pp.91-103
• /
• 2022

This study surveyed 101 occupational therapists who were performing occupational therapy before and after the COVID-19 outbreak to compare their perceptions and performance of hand washing, use of personal protective equipment, and infection control of surrounding environment. Mann-Whitney U test, Kruskal wallis H test, Wilcoxon signed-rank test, Pearson's correlation coefficient were used analyzed. As a result, it was confirmed that they received better infection control education after the outbreak compared to before the outbreak of COVID-19, and their experience with infectious diseases was lower. In addition, it was found that the perception and performance of infection control in hand washing, personal protective equipment, and surrounding environment cleaning were improved after the outbreak compared to before the outbreak of COVID-19. However, to this day, hand washing for more than 40 seconds in running water recommended by the Korea Centers for Disease Control and Prevention, cleaning the treatment room, and disinfection of treatment tools are still in need of improvement. Through this study, infection control education should be repeated regularly to minimize the occurrence of infectious diseases, and It will be a basic data that can be used in infection control education and follow-up studies for occupational therapists in the future.

• Journal of the Korean Society of Radiology
• /
• v.17 no.4
• /
• pp.581-587
• /
• 2023

In this study, we tried to provide basic data for radiation safety management by comparing and analyzing the exposure doses of radiation workers and frequent workers at C University Hospital in Incheon. From January 2021 to December 2022, surface dose and deep dose were analyzed for 30 radiation workers and 8 frequent workers who worked at C university hospital in Incheon. Radiation workers were targeted at radiation technicians and nurses working in the radiation oncology department and nuclear medicine department, and frequent visitors were targeted at frequent workers who manage and clean facilities in the same radiation management area. In the radiation worker group, 3.1 per 10,000 radiation technologist, 1.2 per 100,000 nurses, and 4.5 per 1,000,000 frequent workers showed the possibility of developing side effects on the lungs. The probability of radiation oncology was 1.1 per 10,000 for radiation technologist and 5.2 per 1,000,000 for nurses, and the probability of radiation technologist in nuclear medicine was 2.9 per 10,000 and for nurses was 7.1 per 1,000,000. It is hoped that this study can be used as basic data in future revisions on frequent workers, and it is considered that it will be used as basic data in the field of obstacles in relation to the stochastic effect of radiation in the future.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.13 no.1
• /
• pp.2162-2176
• /
• 1971

From the ancient times our forefathers settled down in this peninsular and cultivated the hills and waste-lands into fields. Instead of fertilizing the lands they moved to find other fertile lands and lived a feudal life of agriculture and various machines played a main role in the land reclamation. The best method of land clearing, the time and efficiency in the operation and the effect of growing crops should sysematically analized prior to the time of 3rd Five-year Economic Development(1972-1976) in order to cultivated 210,000 ha of waste-land or the modernization of our country. The present study was investigated to find out a new working-system of mechanical land clearing and development of fertile soil. The results are as follows: 1) The land reclamation in natural slope is much more encourageable in land clearing and farming when the slope is below ten grades than bench terrace. 2) Weeds were mixed with soil in the land clearing work in order to supply organic materials and to make soil swollen instead of burning of just removing. 3) The equipments such as bulldozers, harrows, power tillers and so on should be prepared in order to do a systematic work in the land clearing. 4) The work of pulling-up roots is dependent upon the forms of roots spreading under the ground. The work of the pulling-up the straight roots was most difficult. 5) The land clearing work of the wrinkled style blocks was easy in pulling up roots and in the time of first plowing. The harrowing work could also be simply done. 6) The amount of soil carried was $240m^3/10a$, 15.6% increased amount from the standard block, while the required time of clearing work was 2 hours 15 minutes 45 seconds/10a, the one third of time required for the standard block. 7) The time disc harrowing work increased 50%, or 15 minutes/10a compared to the harrowing work required in the cultivated soil. 8) The time of rotary tilling increased 2.4 times or 1 hour 47 minutes 43 seconds/10a compared to the time required in the cultivated soil. 9) The reclamed land should be fertilized according to the soil quality, especially added fertilizer should be more than 1,200kg/10a, limes 20kg/10a. In order to produce added fertilizer grass fields should be needed. 10) The experiment of pasture growing is now progressing and therefore the effect of land clearing and the degree of developed soil will be investigated before long.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.2
• /
• pp.45-50
• /
• 2009

The environment exploration is an essential process for indoor robots such as clean robot and security robot. Apartment house and office building has common frame structure, but internal arrangement of each room may be slightly different. So, it is more convenient to use a common frame map than to build a new map at every time the arrangement is changed. In this case, it is important to recognize invariant features such as wall, door and window. In this paper, an indoor mobile robot is implemented, and by using the laser scanner data and line segment histogram with respect to segment orientation and distance, an environment exploration method is presented and tested. This robot is fitted with a laser scanner, gyro sensor, ultra sonic sensor and IR sensor, and programed with C language.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.2
• /
• pp.174-184
• /
• 2020

Objectives: The purpose of this study was to improve the working environment by identifying the work satisfaction of the cleaning workers of the aircraft and measuring and assessing the harmful factors of the cleaning process. Methods: We asked 23 cleaning companies for questionnaires and got 100 answers from 5 companies. The A-E Airline health manager has been contacted to establish a site survey schedule. The in-flight and lounge were measured using direct reading equipment. The harmful factor to be measured are noise, dust, temperature, volatile organic compound, total airborne bacteria, and total airborne bacteria. Results: Uncomfortable positions when replacing blanket, cleaning the table, and cleaning the floor have been identified as factor that reduce work satisfaction. Noise when replacing newspapers and cleaning toilets has been identified as a factor that lowers work satisfaction. Temperature and humidity were found to reduce work satisfaction during in-flight disinfection. Measurements of aircraft cabin and lounge with direct read equipment have shown that none of the items exceed the exposure criteria. Conclusions: As a result of measuring direct-reading equipment, no items exceeded the exposure criteria for each harmful factor. A clear survey of the working environment is required based on the results, and additional research is needed using personal sample measurement.

• Korean Journal of Occupational Health Nursing
• /
• v.24 no.3
• /
• pp.214-223
• /
• 2015

Purpose: This study was conducted to provide basic data for development of health care programs for cleaners working in hospitals by analyzing job-related injuries among them and related factors. Methods: The study surveyed cleaners working in 6 general hospitals in D metropolitan city. The questionnaire was structurally designed to include items about job-related injuries, working conditions, health related characteristics. For the analysis of the collected data, the SPSS/WIN 21.0 software was used, and t-test, ANOVA, correlation analysis, and regression analysis were conducted. Results: Factors that affect health damages were gender and income levels. Inadequate safety facilities and equipment, noise, and income levels were found to be the factors affecting accident injuries. Conclusion: In order to reduce the job-related injuries, efforts need to be made to improve working conditions to deal with inadequate safety facilities and equipment and control noise. To fulfill this need, not only employers of cleaners but also hospitals in which they work should make efforts to educate those cleaners who have little knowledge of health and medical care, and improve their working conditions.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.2
• /
• pp.243-250
• /
• 2008

The coverage algorithm based on Boustrophedon path has been known to be the most efficient in places without or less obstacles If the map of an environmental area thru SLAM algorithm can be obtainable. However, the efficiency of the coverage algorithm based on Boustrophedon path drops drastically when obstacles are complex. In this paper, we propose and implement a new algorithm, which we call Group-k, that efficiently handles the complex area. The Group-k algorithm groups the obstacles and prioritizes the covering sequences with complex rank of the groups. Implementation-based experiments show about 20% improved performance when applying the nor- algorithm, compared to the Boustrophedon path algorithm.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.2
• /
• pp.274-282
• /
• 2011

The purpose of this study was to investigate factory workers' knowledge of sanitation management of school foodstuffs and sanitation practices. A questionnaire that identified employees' food safety sanitation management knowledge and practices was developed based on a review of literature. Subjects consisted of 221 factory workers employed at 34 factories in the Daegu and Gyeongbuk areas. Almost half of the factory workers were 40~49 years of age (45.7%), 34.8% had 1~3 years of work experience, 62.4% of the respondents received food safety education 1~2 times a month and 75.1% of the respondents were satisfied with sanitation education. However, the total score for factory worker sanitation knowledge was low: 4.63/9. Sanitation performance was self-evaluated using a Likert 5-point scale. The total mean score for the factory workers' sanitation performance was 4.63/5. Satisfaction level and the amount of sanitation education, application of sanitation knowledge, attitude regarding sanitation management, and sanitation management performance level were significantly high among workers employed in a HACCP certification facility (p<0.05). The difficulties were found to be sanitation management and the time to deliver food to schools. To instill a sense of duty and pride among workers and to ensure that the food suppliers provide best-quality school foodstuffs safely, school dietitians and factory managers must actively educate workers in safe food handling and sanitation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.58-65
• /
• 2020

3D Models of offshore plant piping materials designed by 3D CAD systems are provided to the production processes in the form of 2D piping drawings and 2D piping installation drawings. In addition to the standard engineering information, the purchasing, procurement, manufacturing, installation, and inspection of raw materials are managed systematically in an integrated process control system. The existing integrated process management system can help reduce the processing time by managing the flow and progress of resources systematically, but it does not include 3D design model information. Hence, it is difficult to understand complicated pipe structures before installing the pipe. In addition, when design changes or immediate design modifications are required, it is difficult to find related data or exchange information quickly with each other. To solve this problem, an offshore plant-piping process-monitoring system was developed based on a 3D model. The 3D model-based piping monitoring system is based on Visual Studio 2017 C# and UNITY3D so that the piping-process work information can be linked to the 3D CAD model in real time. In addition, the 3D model could check the progress of the pipe installation process, such as block, size, and material, and the progress of functional inspection items, such as cleaning, hydraulic inspection, and pneumatic inspection.