• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.229-232
• /
• 2006

The Center for Technology Fusion in Construction was established on Sep. 30, 2005, with the support of Korea Ministry of Construction and Transportation and Korea Institute of Construction and Transportation Technology Evaluation and Planning. It aims to develop the next generation of economic growth engine through the fusion of traditional construction technology and cutting-edge emerging technologies. To achieve this vision, the center tries to establish a system for the systematic construction research based on the fusion approach. The scope of the center focuses on improving the performance of construction project, including planning, design, construction, and maintenance. Along with the newly developed Korea Construction Technology Road Map, the center is expected to significantly contribute to the development of innovative construction technologies for the world-class Korean society.

• Journal of Radiation Industry
• /
• v.12 no.4
• /
• pp.343-348
• /
• 2018

Preliminary study was perfomed to develop a biocompatible filter material using radiation energy. Electrosppined PLLA nano sheets were surface-modificated with hydrophilic groups(acrylic group) by using radiation. The physico-chemical and morphological characteristics of modified PLLA sheets were measured by ATR, SEM, contact angle, and hydrophilic (acryl group) introduction rate (TBO). As a result, there was no morphological(fiber structure) structure change due to radiation, and it was confirmed that an acrylic group was successfully introduced onto PLLA fiber sheet by radiation.

• Journal of Radiation Industry
• /
• v.12 no.4
• /
• pp.349-353
• /
• 2018

Metronidazole (MD), which is used as an antibiotic, is largely used as an oral and skin application agent, and has inhibiting effect on the production of the fungus causing malodor. However, the maximum drug inclusion concentration is 0.75% of skin ointment in commercially available. In this study, hydrogels containing high concentration of metronidazole were prepared by using radiation crosslinking technique based on biocompatible polymers, and release characteristics and antimicrobial properties were evaluated. This study was preliminary carried out to investigate whether it could be used effectively as antibacterial dressing materials.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.3
• /
• pp.65-77
• /
• 2013

Recent advanced sensors and communication technologies have been widely applied to advanced safety vehicle (ASV) for reducing traffic accident and injury severity. To apply the advanced safety vehicle technologies, it is important to quantify the safety benefits, which is a fundamental for justifying application. This study proposed a methodology for quantifying the effectiveness of the advanced driver assistant system (ADAS), and applied the methodology to lane departure warning system (LDWS) and automatic emergency braking system (AEBS) which are typical advanced driver assistant systems. When the proposed methodology is applied to 2008-2010 gyeonggi-province crash data, LDWS would reduce about 10~14% of relevant crashes such as head-on, run-off-the road, rollover and fixed-object collisions on the road. In addition, AEBS could potentially prevent about 50% of total rear-end crashes. The outcomes of this study support decision making for developing not only vehicular technology but also relevant safety policies.

• Journal of Radiation Industry
• /
• v.6 no.2
• /
• pp.165-169
• /
• 2012

This study was conducted to determine the prevention effect of poly-gamma-glutamic acid (${\gamma}-PGA$) on tissue damage induced by gamma irradiation for development of xenograft. Porcine tendons were treated at various doses of ${\gamma}-PGA$ (0.1, 0.5, 1 and 5%) and then gamma-irradiated (30 kGy). Prevention effects on tissue damage were measured as the result of tensile strength, hydroxyproline contents and viscosity of ${\gamma}-PGA$. Tensile strength was remarkably decrease in gamma-irradiated porcine ligament, but increased by ${\gamma}-PGA$ treated one. Among the ${\gamma}-PGA$ treatment doses, 1% treated group showed the highest values of tensile strength compared to non-treated group. Hydroxyproline contents was significantly increased by gamma irradiation, but decreased by the ${\gamma}-PGA$ treatment. Particularly, 1 and 5% ${\gamma}-PGA$ treated group were exhibited lower values of hydroxyproline contents than other group. In the result of viscosity, gamma-irradiated ${\gamma}-PGA$ (1%) was remarkably increased. Base on the results, it demonstrated that gamma irradiation induces severe alteration of mechanical property and collagen contents on porcine ligament, but ${\gamma}-PGA$ can effectively prevent these tissue damage.

• Journal of Radiation Industry
• /
• v.10 no.1
• /
• pp.21-27
• /
• 2016

Periodontitis is disease of damaged gum tissue that is not removed the plaque onto teeth. In case that the symptoms of disease get pain worse, it will have to extract tooth because of tumefy or bleeding at gums so treatment of drug was required to periodontitis. In this study, the hydrogel was prepared by including superior viscous, excellent elastic, and biocompatibility of Poly(vinyl alcohol, PVA) and antimicrobial drug of Metronidazole (MD). The 15 wt% PVA was dissolved in deionized water and then prepared PVA solution was irradiated using gamma-ray at 25 kGy ($10kGy\;hr^{-1}$). In addition, PVA hydrogel was immersed in each 0.1, 0.25 and 0.5 wt% MD solution using stirrer for 24 hr. The result of the gelation, 0.5 wt% MD loaded PVA hydrogel(76%) was lower than PVA hydrogel (88.2%). The swelling ration of 0.5 wt% MD loaded PVA hydrogel (294.8%) was higher than PVA hydrogel (105.2%). The compressive strength and thermal properties of MD loaded PVA hydrogel was gradually lower. The drug release test of 0.5 wt% MD loaded PVA hydrogel (61%) was higher than 0.1 wt% MD loaded PVA hydrogel (12%). Therefore, MD loaded PVA hygrogel may be a promising tool for periodontitis medicine by gamma-ray.

• Journal of the Korean institute of surface engineering
• /
• v.55 no.2
• /
• pp.91-95
• /
• 2022

ZnO single layer (60 nm thick) and ZnO with Ag interlayer (ZnO/Ag/ZnO; ZAZ) films were deposited on the glass substrates by using radio frequency (RF) and direct current (DC) magnetron sputter to evaluate the effectiveness of Ag interlayer on the optical visible transmittance and the conductivity of the films. In the ZAZ films, the thickness of ZnO layers was kept at 30 nm, while the Ag thickness was varied as 5, 10, 15 and 20 nm. In X-ray diffraction (XRD) analysis, ZnO films show the (002) diffraction peak and ZAZ films also show the weak ZnO (002) peak and Ag (111) diffraction peak. As a thickness of Ag interlayer increased to 20 nm, the grain size of the Ag films enlarged to 11.42 nm and the optical band gap also increased from 4.15 to 4.22 eV with carrier concentration increasing from 4.9 to 10.5×10²¹ cm^-3. In figure of merit measurements, the ZAZ films with a 10 nm thick Ag interlayer showed the higher figure of merit of 4.0×10^-3 Ω^-1 than the ZnO single layer and another ZAZ films. From the experimental result, it is assumed that the Ag interlayer enhanced effectively the opto-electrical performance of the ZAZ films.

• Journal of Powder Materials
• /
• v.29 no.1
• /
• pp.14-21
• /
• 2022

In the powder bed fusion (PBF) process, a 3D shape is formed by the continuous stacking of very fine powder layers using computer-aided design (CAD) modeling data, following which laser irradiation can be used to fuse the layers forming the desired product. In this method, the main process parameters for manufacturing the desired 3D products are laser power, laser speed, powder form, powder size, laminated thickness, and laser diameter. Stainless steel (STS) 316L exhibits excellent strength at high temperatures, and is also corrosion resistant. Due to this, it is widely used in various additive manufacturing processes, and in the production of corrosion-resistant components with complicated shapes. In this study, rectangular specimens have been manufactured using STS 316L powder via the PBF process. Further, the effect of heat treatment at 800 ℃ on the microstructure and hardness has been investigated.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.4
• /
• pp.457-463
• /
• 2024

(Bi_1/2Na_1/2)TiO₃(BNT) piezoelectric ceramics are one of the promising materials that can replace Pb(Zr, Ti)O₃(PZT) piezoelectric ceramics due to the high electromechanical strain properties. However, it is still difficult to use practical applications because the required electric field for inducing electromechanical strain is relatively higher than that of PZT ceramics. To overcome this problem, it has been intensively studied on doping impurity or modifying other ABO₃ for BNT-based piezoelectric ceramics. Therefore, this study investigated the effects of La₂O₃ doping on the phase transition behavior and electromechanical strain properties in BNT-SrTiO₃ (BNT-ST) lead-free piezoelectric ceramics. In the case of the temperature-dependent dielectric properties, it was confirmed that a phase transition from ferroelectrics to relaxors is induced with increasing La₂O₃ content. As a result, the electromechanical strain properties of BNT-ST ceramics were improved. The highest S_max/E_max value corresponding to 300 pm/V was obtained at 2 mol% La₂O₃-dopped BNT-ST ceramics. Accordingly, this study successfully demonstrated that La₂O₃ doping is effective on the inducing phase transition from ferroelectrics to relaxors and the improving electromechanical strain properties of BNT-ST lead-free piezoelectric ceramics.

• Journal of Korean Society of Transportation
• /
• v.27 no.6
• /
• pp.109-118
• /
• 2009

The conventional lane changing model has been developed without acceleration or deceleration of vehicles at target lane. Thus, existing lane changing models have limitation to apply in real world. In this paper, lane changing model considered acceleration or deceleration, and calculated the safety distance between subject vehicle and adjacent vehicles for lane changing as well. Simulation was conducted to verify the validity and the efficiency of the developed lane changing model in this paper. Several scenarios were carefully examined by safety distance between subject vehicle and adjacent vehicles. In the result, it was verified that if gap between subject vehicle and adjacent vehicles is larger than safety distance, lane changing behavior between subject vehicle and adjacent vehicles avoids collision. The suggested lane changing model may be applied at the future driver assistance system and advanced safety vehicle.