• Journal of KSNVE
• /
• v.19 no.1
• /
• pp.16-25
• /
• 2009

• Journal of Environmental Impact Assessment
• /
• v.25 no.3
• /
• pp.175-189
• /
• 2016

The guideline for railway noise mapping is notificated in the administration law for noise/vibration which is announced by the ministry of environment, Korea. Here input parameters for the railway sound sources are proposed for each prediction models. In case of the application of the vehicle characteristics it is suggested to choose "0(%)" for the disc brake parameter. However new trains have been in revenue service since the announcement of the guideline, an investigation of the effect of the input parameters of the foreign railway prediction models on the prediction results of korean railway systems are needed. In this paper the sound prediction results are analyzed with a focus on the input parameters such as disc brake percentage, rail roughness, rail joints. Schall03 is used for the railway noise prediction which has been using most frequently in Korea. The results are shown and discussed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.882-888
• /
• 2008

The increase in logistics and the emergence of high speed vehicles are aggravating the noise problem, and disturbing large numbers of people. Therefore, growing attention is being paid to the creation and utilization of a noise map in order to grasp and predict the influence of noise, and to establish a policy that effectively reduces noise. However, so far there has been little progress in developing a predictive formula for railway noise, and a noise prediction program suitable for the domestic environment. Therefore, there is a need for a method to apply the overseas prediction formula to domestic railway vehicles. This study evaluated the prediction method, the result of which is similar to that of a real measurement, using a noise map. It also employed a commercial software program, SoundPlan, to predict noise.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.882-886
• /
• 2007

People living in the large cities are exposed to high level noise due to road-traffic, railway-traffic and aircraft. Nowadays, some researches are ongoing to reduce the noise by using noise map. However it has to be decided which prediction model is the most suitable in Korea. In this study, it has been focused on railway noise prediction models which are employed in a commercial software(Sound Plan) and developed by Korea Railroad Research Institute, and comparative study of the prediction models has been made.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.500-504
• /
• 2008

Residents in an area where both trains and cars pass through are exposed to not only road traffic noise but also railway noise. Nevertheless, the degree of annoyance the caused to the residents is being under evaluated as the noises have been evaluated separately. Therefore, this study aimed at evaluating the integrated noise of road traffic and railway, and proving the accuracy of the evaluation result.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.7
• /
• pp.741-745
• /
• 2008

Residents in an area where both trains and cars pass through are exposed to not only road traffic noise but also railway noise. Nevertheless, the degree of annoyance the caused to the residents is being under evaluated as the noises have been evaluated separately. Therefore, this study aimed at evaluating the integrated noise of road traffic and railway, and proving the accuracy of the evaluation result.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.618-626
• /
• 2011

Recent development of related technologies and efficient utilization of the entire country for the purpose of railway construction, and plans are being accelerated. the railway noise has been improved by increasing the high speed railway station, and accelerating the existing trains. Nord2000 which is an overseas noise prediction equation could not be applied directly to the domestic railway vehicles. So the specific vehicles in the Nordic countries which is a similar specification to domestic trains should be selected. Nord2000's accuracy was compared to Schall03, CRN's. Prediction of Ground impedance and Roughness class were carried out at different. In this paper, the result of selected vehicles for Nord2000 was as follows. S-1aX2 was for express trains, N-$^*2c$-3b was for Mugunghwa, S-Pass/wood was for Saemaul, N-4a was for freight trains, N-3a was for subway, the calculation time for Nord2000 took longer than others, in addition, Ground absorption was indispensable to calculate a noise map for Nord2000. As a result, CRN's prediction noise levels at Wonju-si was closest to the measurements. However, the predicted noise levels of Nord2000 was the most accurate.

• Journal of the Korean Society for Railway
• /
• v.15 no.1
• /
• pp.23-28
• /
• 2012

In this paper, noise of Korean high-speed trains (KTX) running at different speed from 150 to 300km/h was measured by a microphone array system. From the measurement, relation between maximum sound pressure levels and train moving speeds of KTX was drawn and a regression coefficient from the relation was also derived. Moreover, increases of SPL with speeds of KTX were analyzed in the frequency domain. From the analysis, sound characteristics of passing-by noise of KTX were provided. Then, dominant noise source areas were obtained from the measurements and propagation patterns of KTX in vertical direction were also investigated. Finally, noise sources of KTX were identified from inspection of noise maps.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.4
• /
• pp.295-300
• /
• 2013

The noise map can be applied to predict the effect of noise and establish the noise reduction measure. But the predicted value in the noise map can vary depending on the input variables. Thus, we surveyed the several prediction models and analyzed the changes corresponding to the variables for obtaining the coherency and accuracy of prediction results. As a result, we know that the Schall03 and CRN model can be applied to predict the railway noise in Korea and the correction value, such as bridges correction, multiple reflection correction, curve correction must be used for reflecting the condition of the prediction site. Also, we know that the prediction guideline is an essential prerequisite in order to obtain the unified and accurate predicted value for railway noise.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.2
• /
• pp.172-178
• /
• 2010

The multiple regression analysis and path analysis in each dominant area of noise source are conducted to analyze the relationship between dependent variables like annoyance and independent ones such as noise and non-noise factors. The multiple regression analysis shows that impact of noise factors is the highest to annoyance in dominant areas of road traffic and railway noise. Meanwhile, impact of non-noise factors such as sensitivity and satisfaction of environment on annoyance is also high in these areas. The path analysis result for multivariate analysis between various independent and dependent variables is similar to that of the multiple regression analysis. However, noise factor is the greatest factor influent on annoyance in the dominant areas of the combined noise, and relationship between annoyance and sensitivity is the highest in combined area exposed to road traffic noise and railway noise.