• The Journal of the Korean bone and joint tumor society
• /
• v.13 no.1
• /
• pp.1-6
• /
• 2007

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.1
• /
• pp.24-29
• /
• 2019

Purpose: To evaluate the characteristics and the risk factors of early onset subsequent vertebral compression fractures after percutaneous vertebroplasty. Materials and Methods: A total of 44 patients, who had a new subsequent vertebral fracture after percutaneous vertebroplasty for an osteoporotic vertebral compression fracture between January 2013 and December 2015, were recruited. The patients were divided into two groups according to the onset period of subsequent fracture. The number of patients who had a fracture within 3 months following vertebroplasty were 22 cases (Group A); after 3 months were 22 cases (Group B). Variables, including age, sex, bone mineral density (BMD), body mass index (BMI), preexisting vertebral compression fracture, location of the initial fracture, intradiscal cement leakage, injected cement volume, restoration of vertebral body height, and correction of kyphosis, in the two groups were analyzed and compared retrospectively. Results: The age, sex, BMD, BMI, preexisting vertebral compression fracture, location of the initial fracture, intradiscal cement leakage, and correction of kyphosis were similar in the two groups. Both a greater volume of bone cement injected and a greater degree of vertebral height restoration contributed significantly to the risk of fracture within 3 months. Conclusion: The cement volume and degree of height restoration are risk factors for early onset fracture at the adjacent vertebrae after percutaneous vertebroplasty and close attention is needed during the follow-up period.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.1
• /
• pp.90-94
• /
• 2020

Percutaneous balloon kyphoplasty is an option for pain relief in pathological vertebral compression fractures. Complications related to cement leakage through cortical defects have been reported. On the other hand, dural compression due to retropulsion of the tumor mass is rarely reported. The authors report a case of a 65-year female patient who had cauda equina syndrome after a percutaneous balloon kyphoplasty in a pathological vertebral fracture, even though epidural compression were not found prior to surgery. Magnetic resonance imaging revealed retropulsion of the tumor mass into the spinal canal through the disrupted posterior vertebral cortex.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.6.1-6.1
• /
• 2009

신경외과는 뇌수술과 척추수술로 나눈다. 이중뇌수술 분야에서는 두개강내압 항진시 감압술이라고 '머리의 뚜껑을 연다'라는 표현과 마찬가지로 두개골의 일부분(손바닥크기)을 절제하는 수술이 있다. 이때 과거에는 떼어낸 뼈를 복부의 피하지방밑에 심어서 보관을 하다가 3-6개월 후 환자의 뇌상태가 안정이 되면 다시 꺼내어 제자리에 놓았는데, 골편이 피하지방에서 녹는 경우가 다소 있고, 복부에 이식한 장소가염증이 생기는 경우도 있어서 요즘은 냉동고에서 -70도를 유지하여 보관 후 나중이 복원 수술을 할 때녹여서 사용한다. 이를 '자가골 두개성형술' 이라 한다. 하지만골편의 오염이나 소실 혹은 1차 두개성형술 후 감염 등 어쩔 수 없이 자가골을 사용 못하는 경우에는인공으로 두개골편 모형을 제작하여 '뚜껑'으로 사용해야 한다. 현재PMMA를 이용하여 수술 시 모형을 제작하는 방법이 많이 사용되며 최근 단단한 스펀지 형태의 인공제품이 사용되고 있으나 가격이 매우비싸지만 스펀지 기공내로 자가골이 자란다는 장점이 있다. 척추수술 분야에서는 뼈 대치품을 비교적 많이필요로 한다. 즉 척추 후방고정을 하는 경우 원래 수술의 목적인 감압술이나 교정술 등을 한 후 척추분절간 쇠(티타늄사용)고정을 한 뒤에 뼈조직(자가골이나 동종이식골, DBM, HA stick) 등을 충분히 사용하여덮어줌으로써 분절간 골유합을 유도할 때 많은 양이 필요하며, 척추 전방으로 수술을 하는 경우에도 디스크공간이 빈 상태에서 Cage(추체와 추체를 지지하는 작은 상자모양) 내에뼈조직을 넣어서 척추분절간 골유합이 일어나도록 한다. 최근 HA를 cage 대용품으로 사용한 경우에서 HA가 부서지는 경우가 기사화된바 있다. 또한 경추의 추체 내에 작은 구멍만 뚫고 디스크 수술을 한 후에 그 구멍에 HA+B-TCP 소재를 넣어 천연뼈의 성장 유도를 위해 사용되는 등 신경외과의 다양한 분야에서 생체소재들이 사용되고 있다.

• Journal of Biomedical Engineering Research
• /
• v.25 no.3
• /
• pp.171-182
• /
• 2004

This study investigates the biomechanical efficacies of vertebroplasty which is used to treat vertebral body fracture with bone cement augmentation for osteoporotic patients using image and finite element analysis. Simulated models were divided into two groups: (a) a vertebral body, (b) a functional spinal unit(FSU). For a vertebral body model, the maximum axial displacement was investigated under axial compression to evaluate the effect of structural integrity. The stiffness of each FE model simulated was normalized by the stiffness of intact model. In the case of FSU model, 3 types of compression fractures were formulated to assess the influence on spinal curvature changes. The FSU models were loaded under compressive pressure to calculate the change of spinal curvature. The results according to the various factors suggest that vertebroplasty has the biomechanical efficacy of the increment of structural reinforcement in a patient who has relatively high level of BMD and a patient with the amount of 15％, PMMA injection of the cancellous bone volume. The spinal curvatures after compression fracture simulation vary from 9$^{\circ}$ to 17$^{\circ}$ of kyphosis compared to that the spinal curvature of normal model was -2.8$^{\circ}$ of lordosis. These spinal curvature changes cause the severe spinal deformity under the same loading. As the degree of compressive fracture increases the spinal deformity also increases. The results indicate that vertebroplasty has the increasing effect of the structural integrity regardless of the amount of PMMA or BMD and the restoration of decreased vertebral body height may be an important factor when the compressive fracture caused the significant height loss of vertebral body.

• Journal of The Korean Radiological Technologist Association
• /
• v.28 no.1
• /
• pp.333-334
• /
• 2002

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.5
• /
• pp.435-439
• /
• 2019

Purpose: This study evaluated the efficacy of blood mixed cement for osteoporotic vertebral compression fractures in reducing the complications of percutaneous vertebroplasty using conventional cement. Materials and Methods: This study was performed retrospectively in 80 patients, from January 2016 to January 2017. Porous cement was formed by mixing 2, 4, and 6 ml of blood with 20 g of cement used previously. A tube with a diameter and length of 2.8 mm and 215 mm, respectively, was used and the polymerization temperature, setting time, and optimal passing-time were measured and compared with those using only conventional cement. Radiologically, the results were evaluated and compared. Results: The polymerization temperature was 70.3℃, 55.3℃, 52.7℃, and 45.5℃ in the conventional cement (R), 2 ml (B2), 4 ml (B4), and 6 ml (B6), respectively, and the corresponding setting time decreased from 960 seconds (R) to 558 seconds (B2), 533 seconds (B4), and 500 seconds (B6). The optimal passing-time was 45 seconds (B2), 60 seconds (B4), and 78 seconds (B6) at 73 seconds (R), respectively and as the amount of blood increased, it was similar to the cement passing-time. The radiological results showed that the height restoration rates and the vertebral subsidence rates similar among the groups. Two cases of adjacent vertebral compression fractures in the R group and one in the B2 and B4 groups were encountered, and the leakage rate of the cement was approximately two times higher than that in the conventional cement group. Conclusion: In conventional percutaneous vertebroplasty, the procedure of using autologous blood with cement decreased the polymerization temperature, reduced the setting time, and the incidence of cement leakage was low. These properties may contribute to more favorable mechanical properties that can reduce the complications compared to conventional cements alone.

• Journal of the Korean Society of Radiology
• /
• v.11 no.2
• /
• pp.139-144
• /
• 2017

Percutaneous vertebroplasty (PVP) is increasingly used to treat osteoporotic vertebral fractures, myeloma and osteolytic vertebral metastases. The purpose of this study was to measure the absorbed radiation exposure dose and time during PVP and to assess the possibility of deterministic radiation effects to the operator and patient. The radiation dose and time measure by three pain physicians performed consecutive procedures using the twenty case PVP. Patient's dosimeter placed at the anteroposterior(AP) side was treatment of the vertebra body located in the upper level 2-3 and lateral(LAT) side was flank proximal to C-arm tube of back. Operator's dosimeter placed at the apron outside of upper sternum (thyroid), left chest, lower extremity and apron inside of left chest. Results: Radiation exposure times were $3.6{\pm}0.71min$. Measurements on the Patient radiation dose were AP $121.4{\pm}48.1{\mu}Sv$, LAT side $614.7{\pm}177.1{\mu}Sv$. Operator radiation dose were outside of the lead apron upper sternum $33.7{\pm}7.3{\mu}Sv$, outside of the lead apron chest $49.2{\pm}15.0{\mu}Sv$, outside of the lead apron lower extremity $12.8{\pm}3.8{\mu}Sv$ and inside of the lead apron chest $4.2{\pm}1.4{\mu}Sv$. To escape from the danger of radiation first long distance from the c-arm tube second exposure time reduced second lead apron used fluoroscopy during PVP is more safety patient and operation from the radiation exposure.

• Journal of the Korean Arthroscopy Society
• /
• v.4 no.1
• /
• pp.49-53
• /
• 2000

Purpose : The purpose of this study was to evaluate clinical efficacy of the arthroscopic anterior acromioplasty for the treatment of chronic impingement syndrome of the shoulder. Materials and Methods : Between July 1995 and December 1997, twenty seven consecutive shoulders of 26 patients with chronic impingement syndrome of the shoulder were treated by arthroscopic anterior acromioplasty. The patients who had severe osteoarthritis of the shoulder full thickness tear of the rotator cuff, and nonoutlet impingement were excluded. The clinical results were evaluated by using UCLA shoulder rating scale. The average follow-up was 2years 3months(range, 1year 7months to 3years 1 11months). Results : Twenty three patients$(85.2\%)$ were rated as excellent or good results, while four patients$(14.8\%)$ were fair. Twenty six cases$(96.3\%)$ were satisfied with the results of the operations, while one case$(3.7\%)$, who had Parkinsonian syndrome, ossification of posterior longitudinal ligament(OPLL) of the cervical spine, and spinal stenosis of the 5th and 6th cervical spine was not satisfied. Conclusion : Arthroscopic anterior acromioplasty was an effective treatment method, especially for relief of pain, for the treatment of chronic impingement syndrome of the shoulder. If the patient has the combined lesions in the cervical spine and the shoulder, and systemic lesions, these lesions may influence the results of treatment after operation, and cause the unpredictable results.

• The Journal of the Korea Contents Association
• /
• v.22 no.9
• /
• pp.570-582
• /
• 2022

Nucleoplasty is a type of percutaneous disc decompression that has been developed to treat herniated intervertebral discs. Currently, in some clinics, researchers have also applied this procedure to patients with internal disc disruption, apart from the originally intended usage on herniated intervertebral discs. The purpose of this study is to evaluate the feasibility of this extended use based on medical logic. To achieve this, the author analyzed case studies on performing nucleoplasty on patients with internal disc disruption. The main points of the analysis are, first, the validity of the treatment evidence presented by the researchers and, second, the relevance of the patient selection criteria. As a result, it is judged that the therapeutic rationale of existing papers applying nucleoplasty to the treatment of internal disc disruption is unclear or inconsistent with general medical logic, and in the process of patient screening, discs that may be deemed inappropriate for percutaneous decompression are included. Therefore, the author believes that existing studies applying nucleoplasty to the treatment of internal disc disruption have the nature of somewhat adventurous experiments that are unnecessary or can cause potential side effects. In order to uphold patients' rights and improve the completeness of the study in the research process on this topic, the author thinks that it is essential to establish clearer therapeutic evidence than the current level of understanding and to have an elaborate patient screening process based on it.