• 제목/요약/키워드: 처분성

검색결과 1,363건 처리시간 0.043초

A Study on the Justification for Disciplinary by the reason for Whistle-blowing (근로자의 내부고발을 이유로 한 징계의 정당성)

  • Choi, Hong-Ki
    • Journal of Legislation Research
    • /
    • 제44호
    • /
    • pp.611-653
    • /
    • 2013
  • An whistle-blowing is recognition of acts of misconduct or corruption by individuals(laborers) or party which belongs to a certain organization and it refers to the act of informing to the senior organization or to the outside public agency to avoid jeopardies that could be potentially lead against benefit of the public. These whistle-blowings can be a Ansatz that improve corporation's transparency and accountability by prevention of enterprise's misconduct as well, it has been recognized as an important role for the establishment of corporate ethics, moreover, social justice. What to be treated primarily as labor law problem is arousing some controversies of the possibility that the public announcement could be whether a disciplinary punishment or not because it brings some mischievous effects for the honor and the reputation to the company which conducted the illegal actions and the action of the contrary to the social value. And futhermore, recently, the matter of compensational responsibility according to the arrangement conversion, bullying followed by the informant has been brought up. The fundamental standpoint of precedent related with the judgement of justification for the punishment as reason of the whistle-blowing ought to do the sincere duty for the labor contract which is the employees are supposed to consider the employer's profits. For that reason, if the emploee release the inside fact to the public and give any damages to employer's secret or confidence or honor, it will be a causing reasong of the disciplinary punishment, but in specific cases, the relevant and level of punishment limitation can be judged by the contents of public announcement and the truth, the purpose of the acts and details and the way of announcement. Precisely, on the assumption that there are necessity of the characteristic profit or the freedom of expression for the informant, with overall consideration whether or the basis part of the informant is true or there is a fair reason which make the informant believe is true or the purpose of informant has the public profit or the contents of the whistle-blowing are important for relevant organization or the means and the way was suitable, if the whistle-blowing are approved to be resonable, the organization are not permitted the reprimand or dismiss Futhermore, to find the solution for the issues of the disciplinary punishment and the treatment of all sorts of disadvantages, for the reason of whistle-blowing, since the protection law for public declarer which was enacted in last 2011 have the position as the general law, the purport of the equal law has to be considered sytematically and also the judicial precedent which is related to the justification of whistle-blowing are needed to be considered as well.

Sorption Behavior of $^{241}Am,\;^{152}Eu,\;^{160}Tb\;and\;^{60}Co$ in the Geological Materials: Eu as an Optimum Analogue for Fate and Transport of Am Behavior in Subsurface Environment (지질매체내에서의 $^{241}Am,\;^{152}Eu,\;^{160}Tb,\;^{60}Co$의 흡착특성비교: 지표지질내에서의 Am의 거동특성을 위한 최적 유사체로서의 Eu)

  • Lee, Seung-Gu;Lee, Kil-Yong;Cho, Soo-Young;Yoon, Yoon-Yeol;Kim, Yong-Je
    • Economic and Environmental Geology
    • /
    • 제40권4호
    • /
    • pp.361-374
    • /
    • 2007
  • Rare earth elements(REEs) have been used as an useful tool in understanding the various geological processes such as evolution and differentiation in the crust. The REEs also have been used as an analog of actinides for radioactive wastes at the water-rock interactions. Using physicochemical properties of the REEs and actinides, we have shown that Eu is an optimum analogue for understanding the behavior of Am in subsurface environments. Factors affecting sorption behavior of radioactive nuclides in groundwater were investigated by batch experiments. Four nuclides such as $^{241}Am,\;^{152}Eu,\;^{160}Tb\;and\;^{60}Co$ were selected to test our hypothesis, and $^{160}Tb$ and $^{60}Co$ were specifically used to compare to the sorption behavior between $^{241}Am-^{152}Eu$ and other radioactive nuclides. Four different rock samples and one groundwater were used in the batch experiments where solution pH for all experiments was fixed at 5.5. Our results demonstrate that $^{241}Am,\;^{152}Eu,\;and\;^{160}Tb$ show similar sorption behavior whereas $^{60}Co$ is different in sorption behavior at the mineral-water interface, suggesting that the sorption behavior of $^{60}Co$ is affected by different rock types. Our results also show that 1) Eu in REEs is optimum analogue of fate and transport of Am in subsurface environments, and 2) mineral compositions such as $SiO_2,\;TiO_2,\;P_2O_5$ and distribution of REEs such as Eu anomaly play key roles in affecting sorption behavior of radioactive nuclides even though physicochemical properties of geological materials such as specific surface area and cation exchange capacity can not be ruled out.

Stabilization of Radioactive Molten Salt Waste by Using Silica-Based Inorganic Material (실리카 함유 무기매질에 의한 폐용융염의 안정화)

  • Park, Hwan-Seo;Kim, In-Tae;Kim, Hwan-Young;Kim, Joon-Hyung
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • 제5권3호
    • /
    • pp.171-177
    • /
    • 2007
  • This study suggested a new method to stabilize molten salt wastes generated from the pyre-process for the spent fuel treatment. Using conventional sol-gel process, $SiO_2-Al_2O_3-P_2O_5$ (SAP) inorganic material that is reactive to metal chlorides were prepared. In this paper, the reactivity of SAP with the metal chlorides at $650{\sim}850$, the thermal stability of reaction products and their leach-resistance under the PCT-A test method were investigated. Alkali metal chlorides were converted into metal aluminosilicate($LixAlxSi1-_xO_{2-x}$) and metal phosphate($Li_3PO_4\;and\;Cs_2AlP_3O_{10}$) While alkali earth and rare earth chlorides were changed into only metal phosphates ($Sr_5(PO_4)_3Cl\;and\;CePO_4$). The conversion rate was about $96{\sim}99%$ at a salt waste/SAP weight ratio of 0.5 and a weight loss up to $1100^{\circ}C$ measured by thermogravimetric analysis were below 1wt%. The leach rates of Cs and Sr under the PCT-A test condition were about $10^{-2}g/m^2\;day\;and\;10^{-4}g/m^2\;day$. From these results, it could be concluded that SAP can be considered as an effective stabilizer for metal chlorides and the method using SAP will give a chance to reduce the volume of salt wasteform for the final disposal through further researches.

  • PDF

Development of Dust Recycling System and Dust Cleaner in Pipe during Vitrification of Simulated Non-Radioactive Waste (모의 비방사성폐기물의 유리화시 발생 분진의 재순환처리장치 및 배관 내 침적분진에 의한 막힘 방지용 제진장치의 개발)

  • Choi Jong-Seo;You Young-Hwan;Park Seung-Chul;Choi Seok-Mo;Hwang Tae-Won;Shin Sang-Woon
    • Proceedings of the Korean Radioactive Waste Society Conference
    • /
    • 한국방사성폐기물학회 2005년도 춘계 학술대회
    • /
    • pp.110-120
    • /
    • 2005
  • For utilizing vitrification to treat low and intermediate level waste, industrial pilot plant was designed and constructed in October 1999 at Daejon, Korea through the joint research program among NETEC, MOBIS and SGN. More than 70 tests were performed on simulated IER, DAW etc. including key nuclide surrogate(Cs, Co); this plant has been shown to vitrify the target waste effectively and safely, however, some dust are generated from the HTF(High Temperature Filter) as a secondary waste. In case of long term operation, it is also concerned that pipe plugging can be occurred due to deposited dust in cooling pipe namely, connecting pipe between CCM(Cold Crucible Melter) and HTF. In this regard, we have developed the special complementary system of the off-gas treatment system to recycle the dust from HTF to CCM and to remove the interior dust of cooling pipe. Main concept of the dust recycling is to feed the dust to the CCM as a slurry state; this system is regarded as of an important position in the viewpoint of volume reduction, waste disposal cost and glass melt control in CCM. The role of DRS(Dust Recycling System) is to recycle the major glass components and key nuclides; this system is served to lower glass viscosity and increase waste solubility by recycling B, Na, Li components into glass melt and also to re-entrain and incorporate into glass melt like Cs, Co. Therefore dust recycling is helpful to control the molten glass; it is unnecessary to consider a separate dust treatment system like a cementation equipment. The effects of Dust Cleaner are to prevent the pipe plugging due to dust and to treat the deposited dust by raking the dust into CCM. During the pilot vitrification test, overall performance assessment was successfully performed; DRS and Dust Cleaner are found to be useful and effective for recycling the dust from HTF and also removing the dust in cooling pipe. The obtained operational data and operational experiences will be used as a basis of the commercial facility.

  • PDF

The Policy Review and Water Quality Characteristics of National Fishing Harbors and Designated Ports in East Coast of Korea (동해안 국가어항과 지정항만의 수질특성 및 정책적 고찰)

  • Lee, Dae-In;Kim, Gui-Young;Moon, Ju-Hoon;Eom, Ki-Hyuk
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • 제14권4호
    • /
    • pp.213-223
    • /
    • 2011
  • The status and changes of water quality of national fishing harbors and designated ports in East Coast of Korea were analyzed to support establishment effective water environmental management. COD (Chemical Oxygen Demand) concentration was satisfied to designated water quality criteria in most areas, but TN (Total Nitrogen) and TP (Total Phosphorus) exceeded the criteria frequently. Also, peak concentration was summer in COD and SS (Suspended Solid), but winter in TP. Eutrophication index of Ganggu and Pohang (old) area were the highest. Pollution index by function of COD, TN, and TP of Ganggu, Pohang, Jumunjin, and Guryongpo was high with gradual increasing recently, on the contrary, that of Samcheok, Imwon, and Chuksan was decreased. Pollution index involving multi-indictors relation to organics and inorganics was necessary for water quality assessment. Designated water quality criteria needed to be improved because the criteria of Jukbyun and Chuksan was applied more strictly compared to the other regions although without difference of environmental characteristics. Furthermore, the criteria notified lately needed to be related to management pollutants from land-based sources. The continuous diagnosis and monitoring on sediment quality within the study area were necessary for prevention of water pollution and eco-friendly disposal of dredged sediment. Especially, monitoring of Designated Ports was implemented partially, however monitoring ratio of National Fishing Har-bors was 7% to whole part. Therefore, systematic and integrated environmental monitoring for ports and harbors with charge of national management was reestablished by strengthening and securing a legal basis.

동물 결핵

  • Jo, Yun-Sang
    • Journal of the korean veterinary medical association
    • /
    • 제44권9호
    • /
    • pp.803-818
    • /
    • 2008
  • 동물의 결핵은 Mycobacterium bovis의 감염에 의한 만성 소모성 질병이며 인수공통전염병이다. 동물로부터 사람으로의 결핵 전염은 생유 섭취하던 시대에 상당히 많이 보고되었다. 우유의 살균처리와 소에서 피내진단에 의한 양성우 살처분 및 보상금 지급 정책을 전개하면서 M. bovis의 사람전염은 급격히 감소하였다. 소 결핵은 우리나라에서 연간 0.15% 내외의 발생을 보이고 있으며, 발생의 주원인으로는 외부입식소, 인근발생농장, 과거발생농장의 사후관리소홀 등이다. 사람 결핵의 주원인균인 M. tuberculosis와 M. bovis는 유전체가 99.9% 유사하며, M. bovis를 M. tuberculosis의 아종으로 분류하기도 한다. 두 세균은 M. tuberculosis complex에 속하며, M. tuberculosis와 M. bovis이외에도 M. africanum, M. canettii, M. microti, M. pinnipedii 등이 있다. M. bovis는 M. tuberculosis complex중에서 가장 넓은 숙주범위를 가진다. M. bovis의 대표적인 숙주는 종이름에도 나타나 있듯이 소이다. 소결핵 전파원으로서는 M. bovis에 감염된 소가 가장 중요하다. 소 이외에도 면양, 산양, 말, 돼지, 사슴, 엘크, 영양 (antelope, kudus, elands, sitatungas, oryxes, addaxes), 개, 고양이, 흰족제비 (ferrets), 낙타, 여우, 밍크, 오소리, 쥐, 영장류, 라마, 맥 (tapirs), 코끼리, 코뿔소 (rhinoceroses), 주머니쥐, 땅다람쥐 (ground squirrels), 수달 (otters), 물개, 산토끼 (hares), 두더쥐 (moles), 너구리 (raccoons), 코요테, 사자, 호랑이, 표범, 살쾡이 (lynx) 등에 감염될 수 있으나, 대부분 종결숙주 (spillover host)로 가축의 결핵방제가 유지되고 있는 국가에서는 야생동물 결핵의 가축 전염이 문제시되고 있다. M. bovis는 주로 호흡기와 소화기를 통하여 감염되며, 결핵결절이 형성되는 부위를 관찰하면 감염경로를 추정할 수 있다. 결핵에 감염되면, 초기에는 뚜렷한 임상증상을 보이지 않으나, 아침, 추운 날씨, 또는 운동 중에 심한 기침을 하며, 호흡곤란을 일으킬 수 있다. 결핵은 감염되어도 대부분 무증상이기 때문에 피내진단, 결핵결절 병리소견, 원인균 분리 등에 의해 진단하여야 한다. 감염된 결핵균은 탐식세포에 탐식되어 특징적인 육아종성 결절 병변으로 진행된다. 현재 결핵은 피내진단과 결핵결절 병리소견 등에 의해 판정하고 있다. 최신 진단법으로는 피내진단을 대체할 수 있는 인터페론 감마 검사법과 우군의 결핵 스크리닝과 말기 결핵 검사에 우수한 항체진단법이 개발되어 있다. 그러나, 소 결핵 근절을 위해서는 일관성있는 진단법과 진단기준을 적용하는 것이 중요한 성공요인중 하나이다. 소결핵 청정국인 호주와 캐나다에서는 피내진단과 도축장 결절검사를 결핵 양성우 색출방법의 근간으로 삼고 있으며, 소결핵 근절의 최종단계에 이르러서는 특이적인 검사법을 적용하였지만, 근절목적상 민감성이 높은 피내진단법을 사용하였다. 이와 더불어, 피내진단 양성우의 부검소견과 원인균 분리를 통해 결핵을 확진하여 출처농장의 역추적 검사를 통하여 결핵 양성소를 제거하였다. 한편, 결핵의 농장간 및 지역간 전파방지를 위해 결핵 청정농장과 결핵 오염농장, 결핵 청정지역과 결핵 오염지역 구분을 통하여 결핵 오염농장과 결핵 오염지역으로부터 결핵 청정농장과 결핵 청정지역으로의 이동전 결핵 검진을 통해 개체 이동에 따른 결핵 전파를 근본적으로 차단하는 시스템을 엄격히 적용한 것이 주요한 성공 요인중 하나였다. 호주 결핵 근절정책 성공요인을 요약하면, 일관성 있는 결핵진단법 적용, 양성우 출처농장의 철저한 역추적 검사, 개체 이동전 결핵 음성증명 확인, 농가단체의 경제적 및 방역상 적극적인 지원 및 협조 결핵의 지속적인 모니터 링과 현장요구에 부응하는 방제신기술의 지속적인 연구개발 등을 들 수 있다. 최근 들어 국내 동물 결핵은 소, 특히, 한우의 결핵발생이 증가하고 있으며, 사슴 결핵발생도 증가하고 있다. 농장간 및 지역간에 결핵 감수성 가축, 특히, 소와 사슴의 거래가 아주 복잡하게 이루어지고 있는 현실을 고려할 때, 결핵전파의 주원인인 결핵감염 소나 사슴의 농장내 반입을 철저히 차단해야 할 것이다. 이때, 개체 검사는 물론이고, 출처농장에 대한 결핵 음성을 확인한 후 입식하여야 할 것이며, 입식 후에도 60일정도 격리사육하면서 피내진단등 결핵검진 후 음성인 경우에만 합사하여야 할 것이다. M. bovis는 사람을 비롯한 거의 모든 온혈동물에서 결핵을 일으킬 수 있기 때문에, 결핵 감염소로 판정된 농장 종사자는 각 시도 보건소의 협조를 받아 결핵검진을 받도록 해야 한다. 농장 가축에 접촉할 수 있는 야생동물의 접촉을 차단하여야 하며, 특히, 농장 사료의 야생동물에 의한 오염을 방지할 수 있는 사료창고관리를 철저히 해야 한다. 결핵 감염소를 다룰 때는 분비물 또는 가검물에 의해 감염될 수 있기 때문에 개인방역장비 - 방역복, 마스크, 비닐장갑, 비닐장화 - 를 착용한 상태에서 다루어야 한다. 특히, 결핵 감염소를 매몰 또는 소각하는 과정에서 결핵 감염소의 배설물 및 분비물 처리를 철저히 하여야 한다. 모든 작업을 마친 후에는 개인방역장비, 매몰 또는 소각에 사용하였던 장비 등을 청소 및 소독하고 필요시 소각 또는 매몰하여야 하며, 개인감염위험과 타인 감염위험을 방지하기 위해 노출부위를 세척하여야 한다.

  • PDF

Hydraulic-Thermal-Mechanical Properties and Radionuclide Release-Retarding Capacity of Kyungju Bentonite (경주 벤토나이트의 수리-열-역학적 특성 및 핵종 유출 저지능)

  • Jae-Owan Lee;Won-Jin Cho;Pil-Soo Hahn
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • 제2권2호
    • /
    • pp.87-96
    • /
    • 2004
  • Studies were conducted to select the candidate buffer material for a high-level waste (HLW) repository in Korea. This paper presents the hydraulic properties, the swelling properties, the thermal properties, and the mechanical properties as well as the radionuclide release-retarding capacity of Kyungju bentonite as part of those studies. Experimental results showed that the hydraulic conductivities of the compacted bentonite were very low and less than $10^{-11}$m/s. The values decreased with increasing the dry density of the compacted bentonite. The swelling pressures were in the range of 0.66 MPa to 14.4 ㎫ and they increased with increasing the dry density. The thermal conductivities were in the range of 0.80 ㎉/m $h^{\circ}C$ to 1.52 ㎉/m $h^{\circ}C$. The unconfined compressive strength, Young's modulus and Poison's ratio showed the range of 0.55 ㎫ to 8.83 ㎫, 59 ㎫ to 1275 ㎫, and 0.05 to 0.20, respectively, when the dry densities of the compacted bentonite were 1.4 Ms/㎥ to 1.8 Mg/㎥. The diffusion coefficients in the compacted bentonite were measured under an oxidizing condition. The values were $1.7{\times}10^{-10}$m^2$/s to 3.4{\times}10^{-10}$m^2$/s for electrically neutral tritium (H-3), 8.6{\times}10^{-14}$m^2$/s to 1.3{\times}10^{-12}$m^2$/s for cations (Cs, Sr, Ni), 1.2{\times}10^{-11}$m^2$/s to 9.5{\times}10^{-11}$m^2$/s for anions (I, Tc), and 3.0{\times}10^{-14} $m^2$/s to 1.8{\times}10^{-13}$m^2$/s $for actinides (U, Am), when tile dry densities were in the range of 1.2 Mg/㎥ to 1.8 Mg/㎥. The obtained results will be used in assessing the barrier properties of Kyungju bentonite as a buffer material of a repository in Korea.n Korea.

  • PDF

The Effect of the 'Silver Consumer's Product Satisfaction and Knowledge on the Health Functional Consumer's Well-being (실버소비자의 건강기능 제품에 대한 만족과 지식이 웰빙에 미치는 영향)

  • Lee, Soon-Keum;Kim, Yong-Man
    • Journal of Distribution Science
    • /
    • 제9권2호
    • /
    • pp.131-140
    • /
    • 2011
  • On 1 July 2000, as the over-65 year-old population numbered 3,371,000 and accounted for over 7.1% of Korea's total population, an aging society was revealed. The over-65 percentage climbed to 11.0% by late 2010. A truly aged society is expected soon, by 2019. This aging society requires marketing research concerning the consumer behaviour and well-being of the elderly, because the 'silver generation' is emerging as a large part of the consumer market. The purpose of this study is to empirically analyse one effect among several satisfaction factors in the consuming cycle of various health functional products on consumer's well-being and the effect of product knowledge on the relationship between product satisfaction and well-being. To achieve this purpose, we established a research model after reviewing previous studies on product satisfaction, product knowledge, and consumer's well-being. The following hypotheses were developed from the research model. Hypothesis 1: When elderly consumers' satisfaction with health functional products increases, their well-being will increase. Hypothesis 2: The effect of their satisfaction with health functional products on their well-being will be strengthened according to the level of their knowledge of the products. Those hypotheses were tested by multiple and moderated regressions to the empirical data through a questionnaire survey. As a result, Hypothesis 1 was totally adopted, and Hypothesis 2 was only partially adopted. The study has many practical implications for well-being marketing. First, in order to heighten the elderly consumer's well-being, the level of his or her satisfaction with the health functional products has to be raised in every stage: during the acquisition, preparation, use, maintenance, and disposition of the consumption cycle. Moreover, promoting positive emotional experiences while diminishing negative ones requires effort because a consumer's well-being is made up of various needs. Second, the marketing of health functional products should be invigorated in order to raise the level of elderly consumers' knowledge of them. In other words, it is important to give them an expertise in the health functional products through different channels. A statistical analysis showed, however, that their knowledge has a decisive effect on only two satisfaction stages, preparation and maintenance. Nevertheless, this merely confirmed the intuitive assumption that the knowledge of health functional products is most relevant to their preparation and maintenance. In conclusion, this study is timely because few empirical studies exist on the relationships between silver consumer behaviour and well-being marketing. It contributes to our understanding of this subject by revealing the causality between the silver consumer's satisfaction and his or her well-being in the consumption cycle and by discovering the moderating influence of knowledge in that process.

  • PDF

Degradation Rate and Velocity under Different Acidic and Alkaline Degradation Agents for Liquid Fertilizer of Rendering By-product (가축사체 랜더링 부산물의 액비화를 위한 산 및 알칼리 분해제별 분해율과 분해속도 평가)

  • Seo, Young-Jin;Seo, Dong-Cheol;Choi, Ik-Won;Kang, Se-Won;Lee, Sang-Gyu;Sung, Hwan-Hoo;Kim, Tae-Seung;Kim, Hyun-Goo;Park, Sun-Hwa;Kang, Seog-Jin;Cho, Ju-Sik
    • Korean Journal of Soil Science and Fertilizer
    • /
    • 제45권5호
    • /
    • pp.810-816
    • /
    • 2012
  • In order to develop liquid fertilizer using rendering by-product, rates and velocities of degradation from rendering by-product using pig cadaver investigated under different amount of injection and time with degradation agents (KOH, NaOH, $HNO_3$ and $H_2SO_4$). The amount of residue by degradation agent of $HNO_3$ treatment method was higher than that in KOH, NaOH and $H_2SO_4$ treatment methods. The degradation velocities (K; $hr^{-1}$) of rendering by-product in KOH treatment method were higher in the order of 25% ($0.0309hr^{-1}$) > 30% ($0.0268hr^{-1}$) > 20% ($0.0142hr^{-1}$) > 15% ($0.0111hr^{-1}$) > 10% ($0.0102hr^{-1}$) of weight of rendering by-product. In all conditions, the degradation velocity of rendering by-product using $H_2SO_4$ 30% of weight of rendering by-product was rapid than that for KOH, NaOH and $HNO_3$ treatment methods. Degradation rates of rendering by-product using NaOH were similar to that of KOH and $H_2SO_4$ except for $HNO_3$ under injecting 25% and 30% of rendering by-product weight.

Coupled Hydro-Mechanical Modelling of Fault Reactivation Induced by Water Injection: DECOVALEX-2019 TASK B (Benchmark Model Test) (유체 주입에 의한 단층 재활성 해석기법 개발: 국제공동연구 DECOVALEX-2019 Task B(Benchmark Model Test))

  • Park, Jung-Wook;Kim, Taehyun;Park, Eui-Seob;Lee, Changsoo
    • Tunnel and Underground Space
    • /
    • 제28권6호
    • /
    • pp.670-691
    • /
    • 2018
  • This study presents the research results of the BMT(Benchmark Model Test) simulations of the DECOVALEX-2019 project Task B. Task B named 'Fault slip modelling' is aiming at developing a numerical method to predict fault reactivation and the coupled hydro-mechanical behavior of fault. BMT scenario simulations of Task B were conducted to improve each numerical model of participating group by demonstrating the feasibility of reproducing the fault behavior induced by water injection. The BMT simulations consist of seven different conditions depending on injection pressure, fault properties and the hydro-mechanical coupling relations. TOUGH-FLAC simulator was used to reproduce the coupled hydro-mechanical process of fault slip. A coupling module to update the changes in hydrological properties and geometric features of the numerical mesh in the present study. We made modifications to the numerical model developed in Task B Step 1 to consider the changes in compressibility, Permeability and geometric features with hydraulic aperture of fault due to mechanical deformation. The effects of the storativity and transmissivity of the fault on the hydro-mechanical behavior such as the pressure distribution, injection rate, displacement and stress of the fault were examined, and the results of the previous step 1 simulation were updated using the modified numerical model. The simulation results indicate that the developed model can provide a reasonable prediction of the hydro-mechanical behavior related to fault reactivation. The numerical model will be enhanced by continuing interaction and collaboration with other research teams of DECOVALEX-2019 Task B and validated using the field experiment data in a further study.