• Journal of Biomedical Engineering Research
• /
• v.18 no.4
• /
• pp.389-396
• /
• 1997

Several types of electrical artifact seen on electroencephalogram( EEG) records are described. Those are the EOG and the PVC roller pump noise, and so on. An adaptive digital filtering of the electroencephalogram( EEG) is a successful way of suppressing mains interference, but it affects some of the frequency components of the signal, whore artifacts may not be acceptable in some cafes of automatic EEG processing. Thus we studied the method for cancelling these artifacts. This proposed method does not use the reference channel, and is realized by connecting the linear predictor and the fixed FIR filter for the EOG artifact, and by cascading the linear predictor and the noise canceller for the pump artifact. The simulation results illustrate the performances of the proposed method in terms of the capability of interferences suppression. In the results we obtained about 20 dB noise reduction.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.2
• /
• pp.30-37
• /
• 1994

Since the morden targets are of high speed and getting quiet in both active and passive mode, the necessities of developing advanced SONAR system capable of performing target motion analysis (TMA) and target classification are evident. In order to develop such a system, the scattering mechanism of complex bodies needs to be, some extent, fully understood and modeled. In this paper, MOving Spread Target(MOST) signal simulation model is presented and discussed. The model is based on the highlight distribution method, and simulates pulse elongation of spread target, doppler effect due to kinematics of the target as well as SONAR platform, and distribution target strength of each highlight point (HL) with directivity. The model can be used in developing and evaluating advanced SONAR system through system simulation, and can also be used in the development of target state estimation algorithm.

• Journal of Broadcast Engineering
• /
• v.20 no.2
• /
• pp.310-339
• /
• 2015

In this paper, the possibility of a terrestrial fixed 4K UHD (Ultra High Definition) and mobile HD (High Definition) convergence broadcasting service through a single channel employing the FEF (Future Extension Frame) multiplexing technique in DVB (Digital Video Broadcasting)-T2 (Second Generation Terrestrial) systems is examined. The performance of such a service is also investigated. FEF multiplexing technology can be used to adjust the FFT (fast Fourier transform) and CP (cyclic prefix) size for each layer, whereas M-PLP (Multiple-Physical Layer Pipe) multiplexing technology in DVB-T2 systems cannot. The convergence broadcasting service scenario, which can provide fixed 4K UHD and mobile HD broadcasting through a single terrestrial channel, is described, and transmission requirements of the SHVC (Scalable High Efficiency Video Coding) technique are predicted. A convergence broadcasting transmission system structure is described by employing FEF and transmission technologies in DVB-T2 systems. Optimized transmission parameters are drawn to transmit 4K UHD and HD convergence broadcasting by employing a convergence broadcasting transmission structure, and the reception performance of the optimized transmission parameters under AWGN (additive white Gaussian noise), static Brazil-D, and time-varying TU (Typical Urban)-6 channels is examined using computer simulations to find the TOV (threshold of visibility). From the results, for the 6 and 8 MHz bandwidths, reliable reception of both fixed 4K UHD and mobile HD layer data can be achieved under a static fixed and very fast fading multipath channel.

• Analytical Science and Technology
• /
• v.28 no.6
• /
• pp.453-459
• /
• 2015

Split-flow thin cell fractionation (SPLITT fractionation, SF) is a particle separation technique that allows continuous (and thus a preparative scale) separation into two subpopulations based on the particle size or the density. In SF, there are two basic performance parameters. One is the throughput (TP), which was defined as the amount of sample that can be processed in a unit time period. Another is the fractionation efficiency (FE), which was defined as the number % of particles that have the size predicted by theory. Full-feed depletion mode (FFD-SF) have only one inlet for the sample feed, and the channel is equipped with a flow stream splitter only at the outlet in SF mode. In conventional FFD-mode, it was difficult to extend channel due to splitter in channel. So, we use large scale splitter-less FFD-SF to increase TP from increase channel scale. In this study, a FFD-SF channel was developed for a large-scale fractionation, which has no flow stream splitters (‘splitter less’), and then was tested for optimum TP and FE by varying the sample concentration and the flow rates at the inlet and outlet of the channel. Polyurethane (PU) latex beads having two different size distribution (about 3~7 µm, and about 2~30 µm) were used for the test. The sample concentration was varied from 0.2 to 0.8% (wt/vol). The channel flow rate was varied from 70, 100, 120 and 160 mL/min. The fractionated particles were monitored by optical microscopy (OM). The sample recovery was determined by collecting the particles on a 0.1 µm membrane filter. Accumulation of relatively large micron sized particles in channel could be prevented by feeding carrier liquid. It was found that, in order to achieve effective TP, the concentration of sample should be at higher than 0.4%.

• Journal of the Korean earth science society
• /
• v.37 no.7
• /
• pp.420-433
• /
• 2016

The purpose of this study is to improve the calibration matrixes of 2-D and 3-D convective rainfall rates (CRR) using the brightness temperature of the infrared $10.8{\mu}m$ channel (IR), the difference of brightness temperatures between infrared $10.8{\mu}m$ and vapor $6.7{\mu}m$ channels (IR-WV), and the normalized reflectance of the visible channel (VIS) from the COMS satellite and rainfall rate from the weather radar for the period of 75 rainy days from April 22, 2011 to October 22, 2011 in Korea. Especially, the rainfall rate data of the weather radar are used to validate the new 2-D and 3-DCRR calibration matrixes suitable for the Korean peninsula for the period of 24 rainy days in 2011. The 2D and 3D calibration matrixes provide the basic and maximum CRR values ($mm\;h^{-1}$) by multiplying the rain probability matrix, which is calculated by using the number of rainy and no-rainy pixels with associated 2-D (IR, IR-WV) and 3-D (IR, IR-WV, VIS) matrixes, by the mean and maximum rainfall rate matrixes, respectively, which is calculated by dividing the accumulated rainfall rate by the number of rainy pixels and by the product of the maximum rain rate for the calibration period by the number of rain occurrences. Finally, new 2-D and 3-D CRR calibration matrixes are obtained experimentally from the regression analysis of both basic and maximum rainfall rate matrixes. As a result, an area of rainfall rate more than 10 mm/h is magnified in the new ones as well as CRR is shown in lower class ranges in matrixes between IR brightness temperature and IR-WV brightness temperature difference than the existing ones. Accuracy and categorical statistics are computed for the data of CRR events occurred during the given period. The mean error (ME), mean absolute error (MAE), and root mean squire error (RMSE) in new 2-D and 3-D CRR calibrations led to smaller than in the existing ones, where false alarm ratio had decreased, probability of detection had increased a bit, and critical success index scores had improved. To take into account the strong rainfall rate in the weather events such as thunderstorms and typhoon, a moisture correction factor is corrected. This factor is defined as the product of the total precipitable waterby the relative humidity (PW RH), a mean value between surface and 500 hPa level, obtained from a numerical model or the COMS retrieval data. In this study, when the IR cloud top brightness temperature is lower than 210 K and the relative humidity is greater than 40%, the moisture correction factor is empirically scaled from 1.0 to 2.0 basing on PW RH values. Consequently, in applying to this factor in new 2D and 2D CRR calibrations, the ME, MAE, and RMSE are smaller than the new ones.

• Journal of Veterinary Clinics
• /
• v.31 no.6
• /
• pp.495-501
• /
• 2014

The objective of this study was to evaluate the differences and reproducibility of Hounsfield unit (HU) value and volume measurements on different computed tomography (CT) scanner types and different collimations by using a gelatin phantom. The phantom consisting of five synthetic simulated calculus spanning diameters from 3.0 mm to 12.0 mm with 100 HU was scanned using a two-channel multi-detector row CT (MDCT) scanner, a four-channel MDCT scanner, and two 64-channel MDCT scanners. For all different scanner types, the thinnest possible collimation and the second thinnest collimation was used. The HU values and volumes of the synthetic simulated calculus were independently measured three times with minimum intervals of 2 weeks and by three experienced veterinary radiologists. ANOVA and Scheff$\acute{e}$ test for the multiple comparison were performed for statistical comparison of the HU values and volumes of the synthetic simulated calculus according to different CT scanner types and different collimations. The reproducibility of the HU value and volume measurements was determined by calculating Cohen's k. The reproducibility of HU value and volume measurements was very good. HU value varied between different CT scanner types, among different beam collimations. However, there was not statistically significant difference. The percent error (PE) decreased as the collimation thickness decreased, but the decrease was statistically insignificant. In addition, no statistically significant difference in the PEs of the different CT scanner types was found. It can be concluded that the CT scanner type insignificantly affects HU value and the volumetric measurement, but that a thinner collimation tends to be more useful for accurate volumetric measurement.

• Journal of Advanced Navigation Technology
• /
• v.5 no.1
• /
• pp.45-53
• /
• 2001

We present the frame synchronization scheme using the FFT window position restoration algorithm appropriate for wireless OFDM systems under multipath fading environment. From the restoration of the synchronization parameters of previous several frames, the algorithm can extract the synchronization parameters for the next frames. To analyze the performance of the proposed algorithm, we compare the probability of synchronization failure under time and frequency domains, respectively. From the simulation results, one can see that the algorithm in the time domain shows better performance than in the frequency one, for the $E_b/N_o$ of 6.0dB or more.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.11
• /
• pp.42-50
• /
• 2003

In this paper we propose a method of evaluating the performance of a Softswitch that provides call control to voice services in NGN (next generation network). First, we describe the architecture for voice services in NGN and anatomize the call control processes such as call initiation, call re-initiation and call release of a voice connection. kiter that we propose a method of estimating appropriate server capacity of the Softswitch using approximate queuing model. Via numerical experiments we illustrate the implication of the work

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.11
• /
• pp.61-68
• /
• 2008

In this paper, we propose a RF front-end developments for vehicle UWB radar systems. UWB systems have a very narrow pulse width that is below 1ns. Therefore, UWB is designed to have broadband quality of low power several GHz and must coexist with the radio communication system. UWB's advantages include high channel capacity and data rate, because precise resolution for multi-path can easily position estimate and Rake receiver. Also, UWB has low interference because it displays broadband quality of low power. Positioning is made possible by short range accuracy, which can reduce the expense of system design. An RF front-end module is designed using the DCR(Direct ConveRsion) method and is composed in RF for vehicles at a low-cost.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.215.2-215.2
• /
• 2016

플라즈마는 현대 산업에서 다양한 고부가가치 산업 분야에 걸쳐 이용되고 있다. 이러한 플라즈마를 정밀하게 진단하고 제어하는 기술이 공정의 수율을 증대하고 생산성을 높이는데 크게 기여함은 자명하다. 플라즈마를 진단하는 방법은 크게 광학적 진단 방법과, 전기적 진단 방법으로 나눌 수 있는데 광학적 진단 방법은 방전시 발생하는 방출광을 통해 플라즈마의 현재 상태를 예측하는 방법이고, 전기적 진단 방법은 플라즈마 내로 직접 탐침을 접촉하여 전기적 물리량을 측정하는 방법이다. 각각은 정성적, 정량적 진단을 하는 데에 장점이 있다. 공정 모니터링은 주로 광학적 진단 방법에 의해 이루어지는데 전기적 진단 방법은 플라즈마와 직접 접촉하기 때문에 플라즈마에 대한 간섭현상이 발생하므로 부적합하다. 해당 실험에서는 유도 결합형 플라즈마 발생 용기에 아르곤, 산소 혼합 유체를 유입하여 방전하며 광학적 진단 방법을 통해 플라즈마를 관측하며 실험을 진행하였다. 측정 장치는 3채널 광학 진단이 가능한 시스템을 구성하여 공정중 발생하는 방출광의 특정 피크 변화를 공정 변수 변화로 인지하여 질량 유량 제어기를 조작, 피크를 초기상태로 되돌리는 공정 제어가 가능하도록 시스템을 구성하였다. 이를 통해 플라즈마를 이용한 공정 중 공정 변화에 자동으로 대응하는 공정제어 시스템을 시험 하였다.