• Journal of the Korean Chemical Society
• /
• v.66 no.3
• /
• pp.209-217
• /
• 2022

We have developed photosensitive electrochromic smart windows that does not require any transparent conducting oxide (TCO) substrate. In our previous study, we demonstrated that a flexible film-type device made with a low temperature curing WO₃ sol and TiO₂ sol could show a reversible and rapid switching between colored and bleached state via incorporation of platinum catalysts on the surface of WO₃ layer. However, when these devices were exposed to sunlight over 4 hour, it was confirmed that they did not return to fully bleached state in the darkened state due to their overcoloring process. In this study, we added 4-hydroxy-(2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPOL) as an additive to the electrolyte of photosensitive electrochromic device to effectively prevent the undesired overcoloring process. The resulting device with TEMPOL indeed did not undergo excessive coloration and showed great reversibility even after being exposed to sunlight for over 4 hours. Various concentrations of TEMPOL were applied to compare changes in the visible transmittance and coloring/bleaching kinetics of devices. In terms of energetic point of view, we proposed a plausible mechanism of TEMPOL to prevent excessive coloration.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.4
• /
• pp.99-110
• /
• 2022

This study attempted to develop a bodice prototype that is the basis for the production of upper body clothing for 20s plus-size women who have distinct characteristics from women with general body types. Through this, it was intended to provide basic data necessary for the development of plus-size women's clothing, which is revitalizing the market due to the increase in the obese population. Through the first evaluation of appearance and abdominal pressure, patterns such as moving the side neck, adding the amount of armhole dart, and adding the amount of sagging were modified. Through the second evaluation, corrections such as vertical side lines, reduction of the neck of the back center line, and adding the amount of armhole darts were performed. Through the third evaluation, the final pattern drafting method was developed by vertically modifying the side line and adding the amount of back armhole darts. In the case of 20s plus-size female body types, a drafting method distinguished from the general body type was required in the method of setting the side and hem due to the protrusion of the abdomen. This study can be said to be meaningful in that it proposed a bodice prototype drafting method suitable for the body type of 20s plus-size women. In the follow-up study, it is thought that the wearability should be evaluated through actual garment wearing.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.4
• /
• pp.79-88
• /
• 2022

In order to develop a bodice prototype suitable for obese women in their 20s, this study compared and analyzed a total of five pattern system methods, including prototype of France and Japan, one prototype for education in Korea and two prototype for industries in Korea. Through this, this study attempted to investigate the bodice pattern system suitable for the development of plus-size women's clothing. For the pattern drafting, pattern 1 was applied with the most body dimensions such as interscye fold front, interscye fold back, bust circumference, neck circumference, and waist back length, and pattern 2, pattern 4, and pattern 5 were made based on bust circumference and waist back length. As a result of the appearance evaluation, Pattern 3 was evaluated as the best pattern in all items except for the suitability of the center front length and the suitability of the side waist circumference position. However, it was evaluated as inappropriate in items such as the vertical side line, the suitability of the side waist circumference line position, the suitability of interscye fold back position and shape, and the suitability of the back shoulder dart position. Most of the pattern drafting methods are based on the size of the bust circumference, but other institutional methods are considered necessary when setting the neck circumference and shoulder length for 20s obesity women. In addition, it is also required to develop a method for setting the front center length due to abdominal protrusion.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.4
• /
• pp.119-131
• /
• 2021

In this study, I compared the pattern design method of classic shirts focused on the men's clothing consturction textbook. It was intended to select a shirt pattern drawing method suitable for men in their 20s by conducing a appearance evaluation with a 3D simulation program. Pattern drawing method, sizes, appearance evaluation, garment pressure. were evaluated, and SPSS 26.0 program was used for analysis. According to the Pattern drawing method, there were differences in application sizes, and there were many parts where designated sizes were applied. The shirt pattern is mostly the same for the front chest and back chest, front waist and back waist. However, if there is a front and back difference of the chest and the waist circumference, the fit was considered better. B pattern was evaluated as the best in appearance evaluation, color distribution, and mesh condition through 3D simulation, and B pattern was analyzed as the most suitable method for men in their 20s. Since this study applied the average sizes of the 7th Korean Human Body Dimension Survey report in 20s, it is thought that caution should be paid to apply them to all 20s. In the future, it is also thought that research on the actual fit and patterns of various body types and materials in their 20s should be carried out.

• Journal of Korean Society of Forest Science
• /
• v.111 no.4
• /
• pp.557-566
• /
• 2022

This study aimed to obtain basic data on high-quality fruit production and efficient cultivation of persimmon cultivar "Godongsi". In the second year of pruning, the number of fruits per tree according to the number of fruit-bearing mother shoots (300, 400, 500, and 700 [control] treatments) was 676.3, 786.0, 866.7, and 1238.7, respectively. Persimmon cultivar "Godongsi" had a decrease in number of fruits per tree and increase in fruit weight as the pruning intensity increased. The average fruit weight in the 300 treatment group was 212.2 g, which was 1.5 times heavier than that in the control. For a high-quality dried persimmon processing, the rate of grade L fruits (170 g<ｘ≤200 g) and over according to the number of fruit-bearing mother shoots was 86.9%, 48.6%, 33.5%, and 8.1%, respectively. The fruit grade of the pruned treatment group was significantly higher than that of the control. Based on the selling price of dried persimmon, the production amount was significantly higher in the 300 treatment than that in the control. When there were many fruits per tree, there was a decrease in quality and increase in cost of harvesting and processing. In conclusion, pruning is essential to increase the fruit quality (fruit weight and grade) of persimmon cultivar "Godongsi". Moreover, the suitable number of fruit-bearing mother shoots was 300.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.4
• /
• pp.436-441
• /
• 1985

The study was conducted to provide basic information to breeders and agronomists working with sesame. The grain weight and germinability were investigated for eight plant types classified by branching habit, capsules per axil, and carpels and loculi of a capsule. Two typical cultivars were chosen for each plant type among 527 gene pools. Dry weight of one thousand grains was increased rapidly from 25th to 35th day after flowering, and reached peak on 40th day after flowering in upper part capsules and 45th day after flowering in lower and middle part capsules, so that this period was considered to be of physiological maturity in each capsule bearing part. Side capsules on main stem and branch capsules were lighter than central ones of main stem, and upper capsules of four carpels eight loculi type decreased more seriously. BTB type demonstrated relatively better growth compared to the growth of BTQ type in one thousand grain weight. The maximum grain filling duration for germination percentage increased rapidly up to 40th day after flowering. Above 70% germinability was obtained from 40th day after flowering. Harvesting time of physiological maturity was considered to be 45th day after flowering with peaks of 2.14g of one thousand grain weight, 26% of grain water content and 90% of germinability.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.5
• /
• pp.495-501
• /
• 1994

This experiment was carried out to investigate the proper seeding methed for direct seeding culture of rice in puddled soil at ill-drained paddy field. Mangeumbyeo was seeded on May 11 with drill seeder attached to cultivater, dibbling seeder attached to transplanter and power dust blower. And to determine the proper flooding time after seeding, Mangeumbyeo was seeded on May 7 and June 1 with drill seeder. Emergence ratio wasn't significantly different between drill seeder seeding and dibbling seeder seeding but emergence was very low with power dust blower. Working hour for seeding was shortened in the order of power dust blower, drill seeder and dibbling seeder, and these seeding methods saved the working hour remarkably compared with machine transplanting of infant seedling by omitting the procedures of raising seedling and transplanting. Lodging occurred slightly in all seeding methods. However, yield wasn't significantly different between machine transplanting of infant seeding and direct seeding culture in puddled soil except power dust blower. When field was flooded on seeding date, the emergence period was shortened, emergence ratio was increased and weed occurrence was decreased. Yield was highest when flooding was done on seeding date as the number of panicle per m$^2$ and the number of spikelets per m$^2$ were higher than any other flooding time.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.638-643
• /
• 2004

소형화된 기계가공시스템은 사용재료의 다양화와 에너지 및 공간의 감소와 같은 장점을 가지고 작고 정밀한 부품을 가공할 수 있는 시스템으로 주목받고 있다. 이러한 시스템이 비록 그 크기가 일반적인 가공시스템에 비해 작지만 정렬 및 조립공정, 기계요소의 불완정성에 의한 기하학적 오차는 여전히 존재한다. 기하학적 오차 평가는 기계시스템의 정밀도를 효과적으로 적은 비용으로 향상시킬 수 있는 오차보정기술을 적용할 수 있는 토대가 된다. 일반적으로, 3 축의 직선축으로 이루어진 공작기계는 21 개의 오차요소를 가진다. 레이져간섭계는 이러한 오차요소를 평가하는데 널리 사용되고 있지만 광학계를 정렬하고 설치하는 데 많은 어려움이 있으며 한번의 설치로 한 개의 오차요소만이 측정 가능하다. 또한, 소형공작기계의 경우, 그 크기로 인해 기존의 레이져 간섭계를 직접적으로 적용할 수 없다. 따라서, 본 연구에서는 소형공작기계를 포함한 소형가공시스템의 기하학적 오차 평가를 위한 새로운 다자유도 측정시스템을 제안하였다. 5 개의 정전용량변위센서를 사용하는 이 시스템을 통해 한 축의 움직임에 따른 5 개의 오차요소를 동시에 측정 가능하다. 균질 변환행렬을 이용한 측정알고리듬을 구성하고 이를 모의시험을 통해 평가하였다. 수학적 모델링을 통해 각 센서의 출력값을 유도하고 이를 이용하여 각 오차요소를 계산하기 위한 식을 유도하였다. 여기서, 단순화된 식을 적용한 경우, 임의의 오차에 대한 측정 알고리듬의 정확도를 평가하였다. 또한, 측정 시스템의 설치시 발생하는 셋업오차에 대한 측정 알고리듬의 민감도 분석을 행하였다. 제안하는 측정 시스템은 구조가 간단하고 고가의 부가장비가 필요치 않다. 또한, 적은 비용으로 구성할 수 있으며 높은 측정 정밀도를 가지고 소형가공시스템에 필요한 오차 평가를 행할 수 있다.가 함유된 계란을 생산하고 섭취하였을 때 특정항체들의 결합을 통해 병원성 미생물의 성장이나 군체를 형성하는 것을 무력화시켜 결과적으로 병원균을 감소시키거나 억제시킨다는 점이다. 오늘날 약물에 내성을 지닌 박테리아의 출현으로 질병감염을 막는데 항생제의 사용효과가 점차 감소하고 있기 때문에 이러한 항생제를 대체할 수 있는 방안으로 계란항체를 이용할 수 있다.한 중공 플랜지 형상의 단조 방법 중 보다 적절한 단조방법인 압조 단조에 있어서 일반적으로 사용되고 있는 SM10C에 대한 유한요소 해석을 수행하였으며, 제품의 형상비에 따라 폴딩 결함의 발생 유무를 검토하고, 폴딩 결함 없이 단조하기 위한 중공 플랜지의 형상한계 비를 제시하였다.도 경미하게 나타났으나, 경련이 나타난 쥐에서는 KA만을 투여한 흰쥐와 구별되지 않았다. 이상의 APT의 항산화 효과는 KA로 인한 뇌세포 변성 개선에 중요한 인자로 작용할 것으로 사료되나, 보다 명확한 APT의 기전을 검색하고 직접 임상에 응응하기 위하여는 보다 다양한 실험 조건이 보완되어야 찰 것으로 생각된다. 항우울약들의 항혈소판작용은 PKC-기질인 41-43 kD와 20 kD의 인산화를 억제함에 기인되는 것으로 사료된다.다. 것으로 사료된다.다.바와 같이 MCl에서 작은 Dv 값을 갖는데, 이것은 CdCl$_{4}$$^{2-}$ 착이온을 형성하거나 ZnCl$_{4}$$^{2-}$ , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서던지 NH$_{4}$$^{+}$의 경

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2A
• /
• pp.301-310
• /
• 2006

Carbon fiber reinforced polymer (CRFP) materials are well suited to the rehabilitation of civil engineering structures due to their corrosion resistance, high strength to weight ratio and high stiffness to weight ratio. Their application in the field of the rehabilitation of concrete structures is increased due to the vast number of bridges and buildings in need of strengthening. However, RC members, strengthened with externally bonded CFRP plates, happened to collapse before reaching the expected design failure load. Therefore, it is necessary to develop the new strengthening method to overcome the problems of previous bonded strengthening method. This problems can be solved by prestressing the CFRP plate before bonding to the concrete. In this study, a total of 21 specimens of 3.3 m length were tested by the four point bending method after strengthening them with externally bonded CFRP plates. The CFRP plates were bonded without prestress and with various prestress levels ranging from 0.4% to 0.8% of CFRP plate strain. All specimen with end anchorage failed by a plate fracture regardless of the prestress levels while the specimen without end anchorage failed by the separation of the plate from the beam due to premature debonding. The cracking loads was proportionally related to the prestress levels, but the maximum loads of specimens strengthened with prestressed CFRP plates were insignificantly affected by the prestress levels.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.3D
• /
• pp.409-418
• /
• 2009

The aim of this study is to analyze the evaluations and determinants on residential resettlements in accordance with urban regeneration by 7,396 samples from 19 housing redevelopment districts in Busan. The major finding on determinants on residential resettlements in accordance with urban regeneration are as follows; A binary logit model for determinants on residential resettlements in accordance with urban regeneration are composed of owner's characteristics, land and building characteristics, housing complex characteristics, and location characteristics. The significant variables in relation to owner's characteristics are owner's age, owner's place of residence, the possession period against property and investment intention. As a result of logit model for residential resettlements, it shows that the variables in relation to land and building characteristics are the land classification, the use of building, the size of land or building, the permission of building and the appraisal price on land and building. This result means that actual customer's investment connects to resettlement after redevelopment project. The other side, the housing complex variables consist of the brand of construction company, the ratio of large size housing and floor are ratio shows that improvable conditions for housing value are important factor to induce residence's resettlement. The location variables show that Dongbusan has higher probability, the reverse Jungbusan has lower probability in residential resettlement likewise residential preference.