Abstract
Carbon fiber reinforced polymer (CRFP) materials are well suited to the rehabilitation of civil engineering structures due to their corrosion resistance, high strength to weight ratio and high stiffness to weight ratio. Their application in the field of the rehabilitation of concrete structures is increased due to the vast number of bridges and buildings in need of strengthening. However, RC members, strengthened with externally bonded CFRP plates, happened to collapse before reaching the expected design failure load. Therefore, it is necessary to develop the new strengthening method to overcome the problems of previous bonded strengthening method. This problems can be solved by prestressing the CFRP plate before bonding to the concrete. In this study, a total of 21 specimens of 3.3 m length were tested by the four point bending method after strengthening them with externally bonded CFRP plates. The CFRP plates were bonded without prestress and with various prestress levels ranging from 0.4% to 0.8% of CFRP plate strain. All specimen with end anchorage failed by a plate fracture regardless of the prestress levels while the specimen without end anchorage failed by the separation of the plate from the beam due to premature debonding. The cracking loads was proportionally related to the prestress levels, but the maximum loads of specimens strengthened with prestressed CFRP plates were insignificantly affected by the prestress levels.
탄소섬유보강재(CFRP)는 부식에 대한 저항성과 작은 중량에도 불구하고 높은 강도와 강성을 가지고 있어 토목구조물의 보강에 적합하다. 콘크리트 구조물 보강분야에 CFRP의 적용은 보강이 필요한 구조물들이 점점 증가하면서 점차적으로 확대되고 있다. 그러나, CFRP판을 표면에 부착하는 표면부착 공법으로 보강된 RC 부재들은 설계 시 예상되는 파괴하중보다 작은 하중에서 조기파괴가 발생하게 되어 새로운 보강방법의 필요성이 대두되고 있다. 이러한 표면부착공법의 문제점은 CFRP판을 부착하기 전 긴장력을 도입함으로써 해결될 수 있을 것이다. 본 연구에서는 길이가 3.3 m인 21개의 실험체를 CFRP판 을 이용하여 보강한 후에 4점 휨실험을 실시하였다. CFRP판은 긴장하지 않거나 CFRP판의 변형률을 0.4-0.8%까지 긴장하여 부착하였다. 단부정착 장치를 설치한 모든 실험체는 프리스트레싱 수준과 관계없이 CFRP판의 파단으로 파괴되었으나, 단 부정착 장치가 없는 실험체는 조기 부착파괴로 인해 탄소판이 콘크리트로부터 탈락하면서 파괴되었다. 균열 발생 하중은 프리스트레싱 수준과 비례적인 관계에 있었으나, 프리스트레스를 가한 CFRP판으로 보강한 실험체의 최대하중은 프리스트레싱 수준의 영향을 크게 받지 않았다.