• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.21-25
• /
• 2001

기계부품의 소형화 , 고속화, 그리고 저공해, 저소음이 요구되는 세계적인 추세에서 정밀가공기술은 기계 및 전자산 업에서 중요한 위치를 차지하게 되었다. 특히, 무심연삭공정(Centerless Grinding)은 높은 생산성과 정확한 치수 형성의 능력이 있어서 원통형상을 가공하는 중요한 생산공정으로 사용되어 왔다. 예컨대 VCR의 소형 축. Computer Disk Drive, 초소형 모터, 연료분사기등은 쎈터레스 연삭공정을 통하여 높은 정밀도를 얻고 있다. 하지만 이 공정의 특수성과 측정의 어려움으로 인하여 이러한 정밀형상의 형성과정은 아직도 잘 밝혀져있지 않다. 무심연연삭 공정에서는 부품이 기계에 고정되어 있지 않고 공작물 받침날 위에 올려져 있으며 조절바퀴와 연삭바퀴 사이에 눌려져 있다. 조절바퀴가 마찰력으로 공작물을 돌려주며 연삭바퀴에서 연삭가공이 일어나게 된다. 조절바퀴와 연삭바퀴사이의 거리는 기계 자체의 탄성변형으로 인하여 항시 변화하게 되며 이 거리의 변화가 공작물의 정밀형상 형성에 결정적인 영향을 미치게 된다. 본 연구에서는 무심연삭공정중 공작물과 받침날, 조절바퀴, 연삭바퀴의 상대운동을 기하학적으로 해석하였다. 특히 간섭조건을 사용하여 실제 공작물의 운동을 해석하여 순간 명목 절삭깊이를 구하였다. 또한 연삭 특성실험식을 이용하여 수직 연삭력을 구하고 연삭기의 탄성변형을 구하여 순간 실제 절삭깊이를 계산하였다. 그로부터 진원도형성에 관한 기본식을 유도하였다. 본 연구에서 유도된 진원도 형성 식을 이용하여 실험과 동일한 조건으로 컴퓨터 시뮬레이션을 수행하였다. 그리고 원형중의 어떤 이상형상, 즉, 홈또는 돌기는 반복되어서 다른 돌기 또는 홈을 형성 하게되며 그 반복주기는 공작물이 조절바퀴와 연삭바퀴위에 떠있는 각도에 따라 결점 됨을 확인하였다.'유창성' 에 그 목표를 두고 있는 점을 감안한다면, 시작단계부터 반드시 정확한 발음을 지녀야 하는 가의 문제도 생각해 볼 필요가 있다. 경우에 따라서는, 정확한 발음은 그 언어에 대한 숙련도가 점차 높아짐에 따라 이와 병행하여 이루어지는 경우도 흔히 경험하는 일이기 때문이다. 결국 초등영어 교육과정에도 명시되어 있듯이 '...영어에 대한 친숙함과 자신감을 심어주고, 영어에 대한 흥미와 관심을 지속적으로 유지시키는 것이 중요하기' 때문에 무엇보다 중요한 측면은 흥미와 관심을 유지시키는 지적인 학습활동보다는 정의적인 학습활동의 전개가 필요하다고 하겠다. 유리된 AA의 세포독설과 관련된 세포내의 역할에 대해 의문이 제기되었다., PCL에 SOD-1도 경미하게 나타났으나, 경련이 나타난 쥐에서는 KA만을 투여한 흰쥐와 구별되지 않았다. 이상의 APT의 항산화 효과는 KA로 인한 뇌세포 변성 개선에 중요한 인자로 작용할 것으로 사료되나, 보다 명확한 APT의 기전을 검색하고 직접 임상에 응응하기 위하여는 보다 다양한 실험 조건이 보완되어야 찰 것으로 생각된다. 항우울약들의 항혈소판작용은 PKC-기질인 41-43 kD와 20 kD의 인산화를 억제함에 기인되는 것으로 사료된다.다. 것으로 사료된다.다.바와 같이 MCl에서 작은 Dv 값을 갖는데, 이것은 CdCl$_{4}$$^{2-}$ 착이온을 형성하거나 ZnCl$_{4}$$^{2-}$ , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서던지 NH$_{4}$

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.04a
• /
• pp.229-229
• /
• 1994

선택성이 높고 뛰어난 약효를 지닌 항 바이러스제의 개발은 신약개발의 중요한 영역중에 하나이다. 현재 AIDS 치료제로 사용되고 AZT를 비롯하여 항virus 효과를 나타내는 약물의 대부분은 구조적으로 nucleoside계에 속하는 화합물로서 수 많은 약리학적 연구 및 합성 화학적 연구가 이루어져 왔다. 특히 합성 화학적 측면에서 이들 화합물의 합성은 크게 두가지로 나누어지는데 그것은 sugar 부위의 변형을 통한 방법과 염기 부위의 변형을 통한 방법에 의해 새로운 항 바이러스제를 개발하는 것이다. 최근의 연구 동향에 있어서 주목할 만한 변화의 하나는 sugar 부위의 구조적 변형을 시도하는데 있어서 종래의 5원환 형태에서 환이 개열된 형태의 acyclic nucleoside에 대한 연구가 이루어져 좋은 효과를 거두고 인다는 사실이다. Acyclovir, Ganciclovir등 의 개발이 그것이다. 본 연구에서는 종래의 acyclic nucleoside가 ribose sugar의 2'번 및 3'번 탄소를 제거한 acyclic ether 형태로 되어있는 것과는 다르게 ether 부위의 산소를 탄소 치환한 carbo-acyclic nucleoside를 합성하고자 하였다. Acyclic nucleoside를 합성하고자 하였다. Acyclic nucleoside의 side chain의 conformation이 항 바이러스 작용을 나타내는데 필수 불가결한 점을 감안할때, carbo-acyclic nucleoside계 화합물은 보다 다양하게 변형될 수 있는 장점을 가지고 있다. 이러한 관점에서 side chain의 2'번 및 3'번 탄소는 side chain의 conformation을 좌우하는 결정적 요인으로 작용할 것으로 판단된다. 따라서 본 연구에서는 이들 탄소를 중심으로한 분자수식을 시도하기로 하고 bioisosterism을 이용하여 3'위치의 수소를 fluoride로 치환한 화합물을 설계하여 합성을 시도하였다.silyl group-5'-무치환 화합물을 tosyl, azido화 한다음 desilylation하여 얻었다. 목적하는(1) 화합물의 diasteromer 인 2',3'-dihydroxy-5'-무치환 유도체(3)는 (4)화합물 합성시 얻은 hemiactal을 key intermediate로 하여 TsNHNH$_2$, NaB(CN)H$_3$ 및 NaOAc로 처리하므로서 얻을수 있었다. 이들 화합물들의 각종 DNA 및 RNA virus에 대한 항 바이러스작용을 검토한 결과 현저한 항 바이러스 작용을 나타내지 않았다.분화유도 활성을 나타내어 항종양제로의 개발에 많은 흥미가 기대된다.기대된다.oxylic acid (compound 10)를 합성하였다.10^{－7}$ M)에 의한 단백인산화에 대하여는 더 미약한 억제-효과를 나타내었다. 이상의 결과는 PDE-1과 항우울약들의 항혈소판작용은 PKC-기질인 41-43 kD와 20 kD의 인산화를 억제함에 기인되는 것으로 사료된다.다. 것으로 사료된다.다.바와 같이 MCl에서 작은 Dv 값을 갖는데, 이것은 CdCl$_{4}$$^{2-}$ 착이온을 형성하거나 ZnCl$_{4}$$^{2-}$ , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서던지 NH$_{4}$$^{+}$의 경우 Dv값이 제일 작았다. 바. 본 연구의 목적중의 하나인 인체유해 중금속이온인 Hg(II), Cd(II)등이 NaCl같은 염화물이 함유된 시료용액에 공해이온으로 존재할 경우 흡착에 의한 제거가 가능하다. 한편 이같은 중금속이온의 흡착실험은 특히 해수중의 금속이온의 회수연구에도

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.16-23
• /
• 2016

DFRCC (ductile fiber reinforced cementitious composites), which are a significantly improved ductile material compared to conventional concrete, were evaluated as a new construction material with a high potential applications to concrete structures for a range of purposes. In this study, experiments on the failure behavior of composite beams with a DFRCC and FRP (fiber reinforced polymer) plank with a rib used as permanent formwork and tensile reinforcement were carried out. A normal concrete and a fiber reinforced concrete with PVA series of RF4000 and the PP series of PP-macro were used for comparison, and each RF4000+RSC15 and PP-macro+RSC15 was tested by producing composite beams. The experimental results of the FRP plank without a sand coating showed that sliding failure mode between the FRP plank and concrete started from a flexural crack at the beam center; therefore it is necessary for the FRP plank to be coated with sand and the effect of the fiber to failure mode did not appear to be huge. The experiment of the FRP plank with a sand coating showed that both 1200mm and 2000mm allowed sufficient bonding between the concrete and FRP plank. The maximum load of the fiber reinforced concrete was higher than that of normal concrete and the case which a series of PP fiber was mixed showed the highest value. The crack latency caused by the fibers led to composite action with a FRP rib.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.4 no.2
• /
• pp.74-83
• /
• 2001

The purpose of this study was investigate to the influence of forest roads characteristics and environment factors on the soil erosion, stability and vegetation survival of cut slope in forest roads. The results obtained could be summarized as follows; 1. The correlated factors between slope erosion and variables in cut slope were altitude, convex, degree of slope, length of slope and soil depth. In the stepwise regression analysis, length of slope and soil hardness was a high significant and its regression equation was given by -89.6136 + 15.0667X14 + 16.6713X15($R^2$ = 0.6712). 2. The main factors influencing the stability of cut slope were significant in order of coverage, middle, convex, length of slope and north, and its discriminant equation was given by -1.019 + 0.064X22 - 0.808X8 - 0.622X24 + 0.742X11 - 0.172X14 - 0.545X6 ($R^2$ = 0.793). 3. The centroids value of discriminant function in the stability and unstability estimated to 1.244 and -1.348, respectively. The boundary value between two groups related to slope stability was -0.1038. The prediction rate of discriminant function for stability evaluation of was as high as 91.3%. 4. The dominant species of invasion vegetation on the cut slope consist with Carex humilis, Agropyron tsukushiense var. transiens, Calamagrostis arundinacea, Miscanthus sinensis var. purpurascens, and Ixeris dentata in survey area. The rate of vegetation invasion more increased by time passed. 5. The life form of invasion vegetation in cut slop showed to $H-D_1-R_{2,3}-e$ type of the hemicryptophyte of dormancy form, dissem inated widely by wind and water of dissminule type, moderate extent and narrowest extent of radicoid type, erect form of growth form. 6. The correlated factors between forest enviroment and coverage appeared north, passage years and middle position of slope at 5% level. The forest environment factors influencing the invasion plants in survey area were shown in order to altitude, passage years, rock(none), forest type(mixed) and stone amount. The regression equation was given by 17.5228 - 0.0911X3 + 3.6189X28 15.8493X22 19.8544X25 + 0.3558X26 ($R^2$ = 0.4026).

• Horticultural Science & Technology
• /
• v.28 no.4
• /
• pp.552-560
• /
• 2010

$GA_{4+7}$+BA, a plant growth regulator for induction of feathering in young apple tree and increasing fruit size, was applied by various methods on 'Gala'/M.9 apple trees in high density orchard for 4 years to investigate its effect on fruit and shoot growth. $GA_{4+7}$+BA($80-300mg{\cdot}L^{-1}$) increased fruit length, fruit weight, and L/D ratio regardless of application methods, but it did not affect soluble solid content, acidity, leaf area, and chlorophyll. Seed number was not affected by $GA_{4+7}$+BA application, however, more immature seeds was observed in treated 'Gala' fruit. Shoot growth was increased when spraying $GA_{4+7}$+BA at tree crown but not affected when spraying at fruit directly. More significant fruit growth was observed when $GA_{4+7}$+BA was applied on the fruits between late of May and early of June when fruit cell division ended; however, high concentration of $GA_{4+7}$+BA resulted in lower fruit storability because of lower firmness. Hence, more attention should be paid when applying high concentration of $GA_{4+7}$+BA to small sized fruit cultivars like 'Gala'.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.6
• /
• pp.821-832
• /
• 2002

The purpose of this study was to develop grading method of the basic brassiere patterns therewith, provide for 12 size's brassiere patterns and prove fitness of their's and shape. The collected data were statistically processed using the SAS 6.12 for Means, Standard Deviation, etc. The results of this study can be summarized as follows; 1. The basic sizes adopted at the first design stage (see fig.1-2) were 75AA, 75A and 75B each of which was designed as upper foundation basic pattern in reference to the cup size. At the second stage, each of the upper body foundation basic pattern was used to design lower cup, upper up, front panel and wing in their order(see fig.3-6). At the third stage, the other sizes were graded in reference to the three brassiere patterns (75AA, 75A and 75B) to produce 12 brassiere sizes(see Tab. 7-8). In order to develop the basic patterns of adult women's brassieres, 33 women were selected per 11 size combination(3 women per size combination), and then, their brassiere fitting was teated. As a result, the fronts of the basic patterns were found to have such problems as undone front center, poor levelling of upper cup's bottom line or lower cup's top line, poor shape of upper cup's outside top line and shoulder strip position. On the other hand, on the rear side of the basic patterns, the central part of the wing was slightly lifted, while the wing width and straps'interval did not befit the ful1-cup brassiere. The result of this first brassiere fitting test showed that the functionality and aesthetics of the basic pattern brassieres were more or less satisfactory, and thus, the problems were addressed for the second teat. In the second test, the aesthetics, breast-shaping effect and functionality of the basic pattern brassieres were much improved. 2. We were to present the final brassiere sizing system to extend the interior length of breast and the exterior length of breast on the basis of fitting test. Thereby, 75B$.$80A$.$80B$.$85A$.$85B's the interior lengths of breast were enlarged to 0.7cm, the rest size was enlarged to 0.5cm and the exterior length of breast was enlarged to 0.5cm regardless of sizes. 3. The upper foundation basic patterns of 75AA and 75B were presented and and the basic brassiere pattern and grading pattern were presented through to.

• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.258-263
• /
• 2015

This study was conducted to evaluate the effects of the fog-cooling system on the growth and yield characteristics of two large-fruited paprika cultivars during summer cultivation season. The temperature inside the greenhouse equipped with fog-cooling system was $2-3^{\circ}C$ lower than that in the control. The results of study show the possibilities of maintaining indoor temperatures below $35^{\circ}C$ and relative humidity at the level of 80% using fogcooling system during hot seasons of the year. Plant height, fruit weight and number of fruits per plant were higher for both cultivars in the fog-cooling treatment compared to those in control. Mean fruit weight and yield per unit area were higher in the fog-cooling treatment than those in the control. However there were no significant differences in sugar content, flesh thickness and locule number of fruits due to fog-cooling system. Number of fruits with epidermal cracking was decreased in the fog-cooling system for both paprika cultivars. Mineral contents of plants such as nitrogen (N), potassium (K), calcium (Ca), magnesium (Mg), were not affected due to fog-cooling treatment.

• Journal of Bio-Environment Control
• /
• v.16 no.3
• /
• pp.186-193
• /
• 2007

Effects of deficit irrigation by different soil moisture-based water potential on the reduction of green shoulder fruits in fresh tomato were investigated. Deficit irrigation with -30 kPa treatment significantly reduced green shoulder fruit by 53.7% compared to the -15 kPa treatment. The total concentrations of potassium in levels of whole fruit was not different between normal red fruit (NRF) and green shoulder fruit (GSF). However, the concentrations of potassium in distal part of GSF lower than that of a basal part of GSF Total soluble sugar contents in NRF and GSF were increased during the maturation periods. Contents of starch in NRF and distal part of GSF were decreased during the maturation periods. However, contents of starch in basal part of GSF was not change during the maturation periods. Activity of sucrose phosphate synthase was higher in NRF than that of GSF. Activity of acid invertase in NRF and GSF decreased rapidly during the maturation periods. Activity of acid invertase was significantly different in distal and basal part of GSF. Total activities of peroxidase and alcohol dehydrogenase in NRF were higher than that of GSF.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.622-632
• /
• 2018

With the recent changes in the social environment, the growth in the so-called 'five major crimes' has been highlighted as one of the causes of anxiety in Koreans' lives. Many attempts have been made to solve this problem; however, it is still difficult to secure the location information of the socially vulnerable in emergency situations and to precisely identify the features and clothing of criminals and track them using current image analysis technology. Therefore, the development of precision positioning technology and support services along with intelligent security service technology based on spatial information has been given a high priority. This study suggested measures that could be continuously applied to link technologies and services with high linkability by analyzing technologies based on spatial information and other fields. To establish measures for linkage between intelligent security technology and other technologies and services, this study analyzed the existing technologies and research trends in intelligent security technology, and reviewed linkable services according to five criteria established to evaluate their linkability. Based on this analysis, three technologies with high linkability were ultimately selected, and measures for linkage were established. It is expected that the linkage measures derived using the objective evaluation criteria will serve as a stepping stone for promoting active technology linkage and commercialization in the future, even after the completion of this study.

• Journal of Korea Multimedia Society
• /
• v.10 no.4
• /
• pp.527-536
• /
• 2007

This paper proposes a 3D fashion design system that generates a 3D clothes model by using 2D patterns of clothes and drapes the 3D clothes model on a 3D human model. In the proposed system, 2D patterns of clothes are designed by selecting comer points of 2D mesh. After designing 2D patterns, a 3D clothes model is designed by describing the control points to be connected between 2D patterns. The proposed system reads a 3D human body model file and the designed 3D clothes model and creates a 3D human model putting on the clothes by using the mass-spring model based physical simulation. It calculates collision and reaction between the triangles of human body model and those of clothes for realistic simulation. Because the number of triangles is very large, the collision and reaction processing need a lot of time. To solve this problem, the proposed system decreases the number of collision and reaction processing by using the Octree space subdivision technique. It took a few seconds for generating a 3D human model putting on the designed 3D clothes.