• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.13-14
• /
• 2015

본 연구에서는 의료용으로 활용될 수 있는 초소형 마이크로 로봇을 위한 무선 전력 및 동력 전달 방법을 제안하였다. 기존의 무선전력전송 기술과 자기장 차폐 기술을 이용하여 무선전력으로 발생한 전류에 발생되는 Lorentz Force을 로봇에 적용할 수 있는 방법으로서, 효율적인 전력과 동력의 전달을 위한 설계 방법을 제안 하였고, 시뮬레이션과 측정을 통해 검증하였다.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.329-336
• /
• 2014

Purpose : To evaluate the dose on a contralateral breast and the usefulness of shielding according to the distance between the contralateral breast and the side of the beam by breast size when patients who got breast implant receive radiation therapy. Materials and Methods : We equipped 200 cc, 300 cc, 400 cc, and 500 cc breast model on the human phantom (Rando-phantom), acquired CT images (philips 16channel, Netherlands) and established the radiation treatment plan, 180 cGy per day on the left breast (EclipseTM ver10.0.42, Varian Medical Systems, USA) by size. We set up each points, A, B, C, and D on the right(contralateral) breast model for measurement by size and by the distance from the beam and attached MOSFET at each points. The 6 MV, 10 MV and 15 MV X-ray were irradiated to the left(target) breast model and we measured exposure dose of contralateral breast model using MOSFET. Also, at the same condition, we acquired the dose value after shielding using only Pb 2 mm and bolus 3 mm under the Pb 2 mm together. Results : As the breast model is bigger from 200 cc to 500 cc, The surface of the contralateral breast is closer to the beam. As a result, from 200 cc to 500 cc, on 180 cGy basis, the measurement value of the scattered ray inclined by 3.22 ~ 4.17% at A point, 4.06 ~ 6.22% at B point, 0.4~0.5% at C point, and was under 0.4% at D point. As the X-ray energy is higher, from 6 MV to 15 MV, on 180 cGy basis, the measurement value of the scattered ray inclined by 4.06~5% at A point, 2.85~4.94% at B point, 0.74~1.65% at C point, and was under 0.4% at D point. As using Pb 2 mm for shield, scattered ray declined by average 9.74% at A and B point, 2.8% at C point, and is under 1% at D point. As using Pb 2 mm and bolus together for shield, scattered ray declined by average 9.76% at A and B point, 2.2% at C point, and is under 1% at D point. Conclusion : Commonly, in case of patients who got breast implant, there is a distance difference by breast size between the contralateral breast and the side of beam. As the distance is closer to the beam, the scattered ray inclined. At the same size of the breast, as the X-ray energy is higher, the exposure dose by scattered ray tends to incline. As a result, as low as possible energy wihtin the plan dose is good for reducing the exposure dose.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.553-562
• /
• 2020

S-band, C-band and X-band radars are used for weather observation purposes. Since the Meteorological Administration, the Ministry of Environment, and Republic of Korea Air Force operate radars according to the purpose of observation by departments, the installation site and observation characteristics are different. From a meteorological point of view, blind observational areas in the low level with an elevation of less than 1 km around the mountainous terrain near Jirisan and Taebaeksan. Assuming a small radar installation, we simulated low-level observations. In order to monitor dangerous weather in North Korea, we analyzed the precipitation of North Korea and simulated a large radar network. Finally, a radar network for Korean Peninsula was proposed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.1 s.139
• /
• pp.149-156
• /
• 2005

The purpose of this study was to produce the high quality of electromagnetic wave shielding fabrics. In this study, we have produced polyester fabrics by electroless Ag plating. The untreated polyester was etched with $4\%$ NaOH solution added accelerant(Benzyl Dimethyl Dodecyl Ammonium Chloride) then it was catalyzed by $SnCl_2$ solution and activated by $PdCl_2$ solution. Electroless Ag plating was carried out by changing conditions such as temperature. time, weight loss rate of polyester and kind of reducing agents. The electromagnetic wave shielding effectiveness of polyester fabric by electroless Ag plating was measured by RF Impedance Analyzer and element of electromagnetic wave shielding substance was measured using Electron probe micro analyzer. The results were as follows; The plating bath using potassium sodium tartrate by reducing agent was excellent electromagnetic wave shielding effectiveness. Element of electromagnetic wave shielding substance was silver. Electromagnetic wave shielding effectiveness was shown over 64dB at the temperature of $40^{\circ}C$, treating time 30min., weight loss rate $20\%$.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.192.2-192.2
• /
• 2012

위성시스템 소형화, 탑재체 수용증대, 발사비용절감, 탐사임무 효율화 등의 요구로 인하여, 위성 설계에 있어 경량화는 오랜 기간 진행되어온 연구 주제였다. 이러한 연구결과로서, 위성 구조체를 복합재료로 대신하기 위한 구조 경량화 연구와 적용이 성과를 거두었으며, 현재 위성체 프레임이나 전개형 안테나, 광학구조물 등에 경량 탄소섬유 강화 복합재료의 적용은 보편화되어 있다. 한편, 위성시스템에서 전력, 통신, 명령/데이터처리, 자세제어 및 관측기기의 각종 전자장비를 보호하는 하우징 구조물에는 여전히 금속재료가 광범하게 적용되고 있다. 특히, 알루미늄 합금은 하우징 재료로 널리 사용되는데, 강도, 강성, 열전달, 우주방사, 전기전도도 및 EMI 차폐특성과 더불어 가공성이 우수하다는 장점을 지닌 반면에, 금속재료로서 중량이 상당하여 위성 경량화 관점에서는 한계를 갖게 하는 단점이 있다. 전자장비에 부여된 전자기능 측면에서 보면, 하우징은 기생 구조물로서, 경량으로 제공될수록 전자장비 전체 무게에서 전자유닛만의 무게가 차지하는 전기전자기능비가 향상되고 위성 경량화에 크게 기여할 수 있다. 구조 경량화를 위하여 전자장비 하우징을 경량 복합재로 대체하여 설계 및 제작하였으며, 복합재 하우징의 강도, 강성, 열전달, 우주방사, 전기전도도 및 EMI 차폐를 검증할 수 있는 방법에 대하여 검토하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3347-3352
• /
• 2010

It is recommended that the door of control room is closed during radiography to protect a radiologic technologist. However, for those patients such as of emergency or pediatrics, the door must be kept open unavoidably to apply immediate medical administration and treatment on the potential case of emergency which could be happened through the course of radiography. In addition, it could be efficient by reducing patients waiting time when the door is open for a general case. This study was conducted to evaluate practical exposure rate to a radiologic technologist when the door is open during the radiography, and to find out the ways to minimize radiation exposure and to increase the efficiency simultaneously. Measuring practical exposure rate was fulfilled with glass dosimeter, and it was 2.02 mGy/week at the location of radiologic technologist under the condition that the door is open during the radiography, which was about 2.3 times higher than the 100 mR/week. It means that the considerable amount of scattered rays through the door opening, and increase exposure rate at the radiologic technologist. Hence we confirmed that a radiologic technologist probably overexposed if the door is open during the radiography. It was also confirmed by the Monte Carlo simulation that the exposure rate could be reduced up to approximately 1/100 by change only the door opening direction. In conclusion, since the proper door opening direction provides same shielding effect whether it is open or close, the door opening direction need to be considered when it is installed at radiography facilities.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.3
• /
• pp.331-337
• /
• 2018

The decommissioning of nuclear power plants is generally executed in five steps, including preparation, decontamination, cutting/demolition, waste disposal and environmental restoration. So, for efficient decommissioning of nuclear power plants, worker safety, effects compared to cost, minimization of waste, possibility of reuse, etc., shall be considered. Worker safety and measurement technology shall be secured to exert optimal efficiency of nuclear power plant decommissioning work, for which accurate measurement technology for systems and devices is necessary. Typical In-Situ methods for decommissioning of nuclear plants are CZT, Gamma Camera and ISOCS. This study used ISOCS, which can be applied during the decommissioning of a nuclear power plant site without collecting representative samples, to take measurements of the S/G Water Chamber. To validate the measurement values, Microshield and the GEANT4 code was used as the actual method were used for modeling, respectively. The comparison showed a difference of $1.0{\times}10^1Bq$, which indicates that it will be possible to reduce errors due to the influence of radiation in the natural environment and the precision of modeling. Based on the research results of this paper, accuracy and reliability of measurement values will be analyzed and the applicability of the direct measurement method during the decommissioning of NPPs will be assessed.

• The Journal of Korean Society for Radiation Therapy
• /
• v.25 no.1
• /
• pp.87-90
• /
• 2013

Purpose: Introducing CR (Computed Radiography) system created a process of printing therapy irradiation images and converting the degree of enlargement. This is to increase job efficiency and contribute to work improvement using a computerized method with home grown software to simplify this process, work efficiency. Materials and Methods: Microsoft EXCEL (ver. 2007) and VISUAL BASIC (ver. 6.0) have been used to make the software. A window for each shield block was designed to enter patients' treatment information. Distances on the digital images were measured, the measured data were entered to the Excel program to calculate the degree of enlargement, and printouts were produced to manufacture shield blocks. Results: By computerizing the existing method with this program, the degree of enlargement can easily be calculated and patients' treatment information can be entered into the printouts by using macro function. As a result, errors in calculation which may occur during the process of production or errors that the treatment information may be delivered wrongly can be reduced. In addition, with the simplification of the conversion process of the degree of enlargement, no copy machine was needed, which resulted in the reduction of use of paper. Conclusion: Works have been improved by computerizing the process of block production and applying it to practice which would simplify the existing method. This software can apply to and improve the actual conditions of each hospital in various ways using various features of EXCEL and VISUAL BASIC which has already been proven and used widely.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.2 no.3
• /
• pp.60-66
• /
• 1991

In this paper, circula and rectangular apertures arranged with triangular and rectangular lattices and having a certain thickness are considered for eddective electromagnctic wave shielding when the plane wave is incident normally to the perfectly conductingmaterrial. The shielding effectiveness is represented by the transmitted power which can be obtained by reflection and transmission coefficients using Floquet mode representation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.2
• /
• pp.172-174
• /
• 2016

In heterogeneous platoons, consisting of various size of vehicles, the signal from/to a small-size vehicle may be blocked by adjacent large-size ones. In this case, some vehicles in between the source and the destination should relay the messages. We design an efficient message relaying scheme for these platoons and evaluate its performance, taking the linear topology of platoons into account.